Register your product and get support at 6162 series www.philips.
Contents 1 Get Support 3 13 Smart TV 42 1.1 Identify and Register your TV 3 1.2 TV Help and User Manual 3 1.3 On-line Help and User Manual 3 1.4 Consumer Care / Repair 3 13.1 Setup Smart TV 42 13.2 Smart TV Start Page 13.3 App Gallery 42 13.4 Multi View 42 2 Software 14 Netflix 4 4 4 2.1 Update Software 2.2 Software Version 3 Quick Guide 16 Specifications 6 4.1 Read Safety 8 4.2 TV Placement 8 4.3 Turn on TV 8 10 5.1 Connectivity guide 10 5.2 Antenna 10 5.3 Satellite 10 5.4 Video Device 10 5.
1 1.3 Get Support On-line Help and User Manual 1.1 To solve any Philips TV related problem, you can consult our online support. You can select your language and enter your product model number. Identify and Register your TV Identify your TV - TV model number and serial number Go to www.philips.com/support. You might be asked to provide the TV product model number and serial number. Find these numbers on the packaging label or on the type label on the back or bottom of the TV.
2 back on again. Please wait. Software Do not . . . • use the remote control • remove the USB memory device from the TV • press twice • press the power switch on the TV The TV switches itself off (for 10 seconds) and then back on again. Please wait. 2.1 Update Software Search for Updates The TV software has been updated. You can use the TV again. To prevent an accidental update of the TV software, delete the autorun.upg file from the USB memory device.
3 Quick Guide 3.1 Remote Control Batteries and Cleaning Replace batteries If the TV does not react on a key press on the remote control, the batteries might be empty. 1 - Standby / On To switch the TV on or back to Standby. To replace the batteries, open the battery compartment on the back of the remote control. 2 - Playback and Record • Play , to playback.
To open the Smart TV start page. To switch subtitles on, off or to show automatically. 3 - Colour keys Direct selection of options. Blue key , opens Help. 5 - Channel To switch to the next or previous channel in the channel list. To open the next or previous page in Text/Teletext. To start the next or previous chapter on a disc. 4 - INFO To open or close programme info. 5 - BACK To close a menu without changing a setting. 6 - Mute To mute the sound or to restore it.
3 - Press up or down to adjust the volume or tune to the next or previous channel. Press up or down to go through the list of sources, including the tuner selection. The menu will disappear automatically.
4 Setting Up 4.1 Read Safety Read the safety instructions first before you use the TV.
Although this TV has a very low standby power consumption, unplug the power cable to save energy if you do not use the TV for a long period of time. On or Standby Before you switch on the TV, make sure you plugged in the mains power in the POWER connector on the back of the TV. Switch On • Press the small joystick key on the back of the TV. Switch to standby To switch the TV to standby, press on the remote control. You can also press the small joystick key on the back of the TV.
5 5.3 Connections Satellite 5.1 Attach the satellite F-type connector to the satellite connection SAT at the back of the TV. Connectivity guide Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound. When you connect a device, the TV recognizes its type and gives each device a correct type name. You can change the type name if you wish.
5.5 Component Audio Device Y Pb Pr - Component Video is a high quality connection. HDMI ARC The YPbPr connection can be used for High Definition (HD) TV signals. Next to the Y, Pb and Pr signals add the Audio Left and Right signals for sound. Only HDMI 1 on the TV have Return Channel). Match the YPbPr (green, blue, red) connector colours with the cable plugs when you connect. Use an Audio L/R cinch cable if your device also has sound.
Headphones Using Miracast You can connect a set of headphones to the connection on the side of the TV. The connection is a mini-jack 3.5mm. You can adjust the volume of the headphones separately. Switch on Miracast Press SOURCES > Miracast Share a Screen on TV 1 - Activate Miracast (Screen mirroring) on your mobile device. 2 - On your mobile device, select the TV. (This TV will be displayed as TV model name) 3 - Select the TV name on your mobile device, after connection, you can enjoy using Miracast.
5.7 MHL Other Device This TV is MHL™ compliant. CAM with Smart Card - CI+ If your mobile device is also MHL compliant, you can connect your mobile device with a MHL cable to the TV. With the MHL cable connected you can share what's on your mobile device on the TV screen. Your mobile device charges its battery at the same time. The MHL connection is ideal for watching movies or playing games from your mobile device on TV for a longer time. About CI+ This TV is ready for the CI+ Conditional Access.
CAM. Hard Drive with a minimum of 4GB disk space. To Record To pause and record a broadcast, you need a minimum of 250GB disk space. If you want to record a broadcast with TV guide data from the Internet, you need to have the Internet connection installed on your TV before you install the USB Hard Drive. 1 - Connect the USB Hard Drive to one of the USB connections on the TV. Do not connect another USB device to the other USB ports when formatting. 2 - Switch on the USB Hard Drive and the TV.
TV, you cannot use the stored recordings on another TV or PC. Do not copy or change recording files on the USB Hard Drive with any PC application. This will corrupt your recordings. When you format another USB Hard Drive, the content on the former will be lost. A USB Hard Drive installed on your TV will need reformatting for use with a computer. To format a USB Hard Drive… 1 - Connect the USB Hard Drive to one of the USB connections on the TV.
6 Switch Source 6.1 Source List • To open the sources menu, press SOURCES . • To switch to a connected device, select the device with the arrows (up) or (down) and press OK. • To close the source menu without switching to a device, press SOURCES again. 6.2 Rename Device • Only CVBS, YPbPr, HDMI sources can be renamed or replace device icon. 1 - Press SOURCES , and select CVBS, YPbPr or HDMI. 2 - Press Edit and press OK.
7 Channels Re-install all channels (Home) > Settings > Antenna/cable installlation > Search for channels > Reinstall channels 7.1 About Channels and Switch Channels 1 - Select the country where you are now and press OK. 2 - Select Antenna (DVB-T) or Cable (DVB-C) , and select one item you need to re-install. 3 - Select Digital and analogue channels, Only digital channels, or Only analogue channels. 4 - Select Start and press OK to update channels. This can take a few minutes.
Network frequency With the Network frequency mode set to Manual, you can enter the network frequency value received from your cable provider here. To enter the value, use the number keys. Digital: Reception Test (Home) > Settings > Antenna/cable installlation > Digital: reception test The digital frequency is shown for this channel. If the reception is poor, you can reposition your antenna. To check the signal quality of this frequency again, select Search and press OK.
transponder or LNB valeus which you can enter here. Satellite • LNB Power - By default, LNB Power is set to On. • 22 kHz Tone - By default, the Tone is set to Auto. • Low LO Frequency / High LO Frequency - The local oscillator frequencies are set to standard values. Adjust the values only in case of exceptional equipment that needs different values.
Once a day, at 6 AM, the TV updates the channels and stores new channels. New channels are stored in the All channels list but also in the New channels list. Empty channels are removed. If new channels are found or if channels are updated or removed, a message is shown at TV start up. The TV must be in standby to automatically update channels. channels of the package only or select All channel unsorted to install the package and all other available channels too.
2 - Press OPTIONS again to close. Upload a Channel List To not Installed TVs Subtitles Depending on whether your TV is already installed or not, you must use a different method to upload a channel list. To switch on Subtitles, press SUBTITLE. You can switch subtitles Subtitle on or Subtitle off . Alternatively you can select Automatic. To a TV that is not yet installed 1 - Plug in the power plug to start the installation and select language and country. You can skip the channel search.
one TV channel. The TV shows a message if any such TV channels are available. Mono / Stereo You can switch the sound of an analogue channel to Mono or Stereo. 7.3 To switch to Mono or Stereo… Channel List Tune to an analoge channel. 1 - Press OPTIONS, select Mono/Stereo and press (right). 2 - Select Mono or Stereo and press OK. 3 - Press (left) repeatedly if necessary, to close the menu. Open Channel List To open the current channel list… 1 - Press , to switch to TV.
from a favourites channel list, once completed, press Done. Remove Favourite List LIST > OPTIONS > Select channel range 7.4 Select a range of channels in a favourites channel list, once completed, press OK. Select Channel Filter LIST > OPTIONS > Digital/analogue, Free/scrambled Select Channel List LIST > OPTIONS > Remove favourite list To remove existing favourite list, select Yes.
4 - Press the Navigation buttons to move the highlighted channel to another location and press OK. 5 - Once completed, press OK. Text Options In Text/Teletext, press OPTIONS to select the following… * Satellite channel only can be searched on xxPUS6162, xxPUS6262, xxPUS6272 TV models. • Freeze page To stop the automatic rotation of subpages. • Dual screen / Full screen To show the TV channel and Text alongside each other. • T.O.P. overview To open T.O.P. Text.
8 Change Day TV Guide If the TV guide information comes from the broadcaster, you can press + to view the schedule of one of the next days. Press - to go back to the previous day. 8.1 What You Need Alternatively, you can press OPTIONS and select Change day. With the TV guide you can view a list of the current and scheduled TV programmes of your channels. Depending on where the TV guide information (data) is coming from, analogue and digital channels or only digital channels are shown.
Set a Recording You can set a recording in the TV Guide. In the TV Guide, a programme set to be recorded is marked with . To see the recording list, press Recordings , a programme set to be recorded is marked with a (red dot) on the front of the programme name. To record a programme… 1 - Press TV GUIDE and select a future or ongoing programme. 2 - Press the colour key Record . To cancel a recording… 1 - Press TV GUIDE and select the programme set for recording.
9 recordings. Recording and Pause TV Schedule a Recording You can schedule a recording of an upcoming programme for today or a few days from today (maximum of 8 days away). The TV will use the data from the TV Guide to start and end the recording. 9.1 Recording To record a programme… What You Need 1 - Press TV GUIDE. 2 - On the TV guide, select the channel and programme you wish to record. Press (Right) or (Left) to scroll through the programmes of a channel.
3 - At the top of the screen, select Scheduled and press OK. 4 - Press the colour key Schedule and press OK. 5 - Select the tuner from where you want to record and press OK. 6 - Select the channel to record from and press OK. 7 - Select the day of the recording and press OK. 8 - Set the start and end time of the recording. Select a button and use the (up) or (down) keys to set the hours and minutes. 9 - Select Schedule and press OK to schedule the manual recording.
10 Photo Options Videos, Photos and Music With a photo on screen, press OPTIONS to… List/Thumbnails View photos with list view or thumbnails view. Shuffle off, Shuffle on View the pictures in sequential order, or at random. 10.1 From a USB Connection Repeat, Play once View the pictures repeatedly or once only. You can view your photos or play your music and videos from a connected USB flash drive or USB Hard Drive. Slideshow speed Set the speed of the slideshow.
Video Options During the video playback, press OPTIONS to… Subtitles Display the subtitles if available, select On, Off, or On during mute. Charater set Select one of system for charater. Audio language Play the audio language if available. Status Display file information, like sound mode. Repeat, Play once Play videos repeatedly or once. 10.4 Music Play Music Open music folder 1 - Press SOURCES, select USB and press OK.
11 Demo Me Open TV Setting Menus View Demo Me for demo on this TV. 11.3 Quick Settings and All Settings 11.1 Home Menu Overview Quick settings menu: Press (Home) to select one of below menus, then press OK. Press SETUP key on the remote control to find frequently used settings in Quick settings menu. Channels • Picture style - Select one of preset picture styles for ideal picture viewing. • Picture format - Select one of preset picture format which fits the screen.
The available Picture styles are ... (Home) > Settings > • Personal - The picture preferences you set during the first start up • Vivid - Ideal for daylight viewing • Natural - Natural picture settings • Standard - Most energy conscious setting • Movie - Ideal for watching movies • Game - Ideal for gaming* Picture > Brightness Press the arrows (up) or (down) to set the level of brightness of the picture signal.
Press the arrows (up) or (down) to set a nonlinear setting for picture luminance and contrast. Contrast Settings Contrast Modes (Home) > Settings > Picture > Advanced > Contrast > Contrast mode Ultra Resolution (Home) > Settings > Picture > Sharpness > Ultra Resolution Select Normal, Optimized for picture, Optimized for energy saving to set the TV automatically reduces the contrast, for best power consumption or for best picture experience, or select Off to switch off the adjustment.
(Home) > Settings > Picture > Advanced > Computer > On • (Home) > Settings > Picture > Picture style > Game. • Network/Internet streaming Ultra HD 50Hz/60Hz videos. Quick Picture Settings (Home) > Settings > Picture > Quick picture settings • During the first installation, you did some picture settings in a few easy steps. You can redo these steps with Quick picture settings menu. • Select the picture setting you prefer and go to the next setting.
select HDMI sound system. The TV will switch off the TV speakers when the device is playing the sound. Headphone Volume (Home) > Settings > volume Sound > Headphone Press the arrows (up) or (down) to adjust the volume of a connected headphone separately. Clear Sound (Home) > Settings > Sound > Advanced > Clear Sound Surround Mode (Home) > Settings > Sound > Select On to improve the sound for speech. Ideal for news programmes.
Digital out offset (Only available when Digital out General Settings delay set to On) (Home) > Settings > Sound > Advanced > Digital out offset Connection Related Settings USB Hard Drive • If you cannot set a delay on the Home Theatre System, you can set the TV to sync the sound. • You can set an offset that compensates for the time necessary for the Home Theatre System to process the sound of the TV picture. • You can set the value in steps of 5ms. Maximum setting is 60ms.
(Home) > Settings > General settings > EasyLink > EasyLink > Location - Home or Shop On (Home) > Settings > General settings > Location • Select the location of your TV • Select Shop, the picture style is switched back to Vivid, and can adjust shop settings. • Shop mode is for in-store promotion.
(Home) > Settings > Region and language > Language > Primary text, Secondary text Channel Logos (Home) > Settings > General settings > Advanced > Channel logos Some digital TV broadcasters have several Text languages available. In some countries, the TV can show the channel logos. If you do not want these logos to appear, you can switch them off.
to 0 minutes, the sleep timer is switched off. You can always switch off your TV earlier or reset the time during the countdown Lock Settings Set Code and Change Code (Home) > Settings > Child lock > Set Universal Access Settings code, Change code (Home) > Settings > Set new code or reset change code. The child lock code is used to lock or unlock channels or programmes.
12 Network Make the Connection - WPS (Home) > Settings > network > WPS 12.1 Network > Connect to If your router has WPS, you can directly connect to the router without scanning for networks. If you have devices in your wireless network that use the WEP security encryption system, you cannot use WPS. Home Network To enjoy the full capabilities of your Philips Smart TV, your TV must be connected to the Internet. 1 - Go to the router, press the WPS button and return to the TV within 2 minutes.
network > Wired If your media files do not play on your TV, make sure that the Digitial Media Renderer is switched on. As a factory setting, DMR is switched on. 1 - Connect the router to the TV with a network cable (Ethernet cable**). 2 - Make sure that the router is switched on. 3 - The TV constantly searches for the network connection. 4 - A message will be shown when the connection is successful.
13 Recommended Apps window. Smart TV Search With Search, you can search the App gallery for relevant Apps. Enter a keyword in the text field, select and press OK to start searching. You can enter names, titles, genres and description keywords to search. Alternatively, you can leave the text field empty and search for the most popular searches/keywords for a range of categories. In the list of found keywords, select a keyword and press OK to search for items with that keyword. 13.
14 Netflix If you have a Netflix menbership subscription, you can enjoy Netflix on this TV. Your TV must be connected to the Internet. To open Netflix, press to open the Netflix App. You can open Netflix immediately from a TV in standby. www.netflix.
* Energy consumption kWh per year, based on the power consumption of the television operating 4 hours per day for 365 days. The actual energy consumption depends on how the television is used. 15 Environmental 15.1 ** When the TV is turned off with the remote control and no function is active. European Energy Label The European Energy Label informs you on the energy efficiency class of this product. The greener the energy efficiency class of this product is, the lower the energy it consumes.
Please find out for yourself about the local rules on separate collection of batteries because correct disposal will help to prevent negative consequences for the environment and human health.
16 16.4 Specifications Supported Input Resolution Video 16.1 Power Support Timing Product specifications are subject to change without notice. For more specification details of this product, see www.philips.com/support Video support timing also includes field/frame rate 23.976Hz, 29.97Hz and 59.94Hz.
16.5 16.8 Supported Input Resolution Computer Connectivity TV Side • Common Interface slot: CI+/CAM • USB 2 - USB 2.0 • HDMI 3 in - MHL - UHD - HDR • Headphones - Stereo mini-jack 3.
17 respond to the remote control. Troubleshooting Creaking sound at startup or switch off When you are turning the TV on or standby, you hear a creaking sound from the TV chassis. The creaking sound is due to the normal expansion and contraction of the TV as it cools and warms up. This does not affect performance. 17.1 Tips If you can't find a solution for your TV problem in Troubleshooting, you can use Keywords in Help > User manual to find the information you are looking for.
17.4 17.5 Channels Satellite No digital channels found during the installation • Check if the TV was connected with an antenna or is using a provider signal. Check the cable connections. • Check if the country where you install the TV, has digital channels available. • Check if you selected the correct DVB (Digital Video Broadcast) system. Select DVB-T (terrestrial) when you use an antenna or common antenna, select DVBC (cable) if you use a TV cable service with a CAM module.
• Check if the the external device or source is properly connected. • Check if the reception is poor. • Check if the picture is set to a minimal value. Select Picture style and select a style and press OK. (Home) > Settings > Picture > Picture style • To check if the TV is broken, try to play a video clip. Press Settings > Help > Check the TV. If the video clip stays black, call Philips. Wait until the clip ends and select Contact info in the Help menu. Call the telephone number for your country.
17.8 17.10 HDMI - UHD Wi-Fi and Internet HDMI • Note that HDCP (High-bandwidth Digital Content Protection) support can delay the time taken for a TV to display content from an HDMI device. • If the TV does not recognise the HDMI device and no picture is displayed, switch the source from one device to another and back again. • This is an Ultra HD TV. Some older devices connected with HDMI - do not recognise an Ultra HD TV electronically and might not work correctly or show distorted picture or sound.
ensure that the power voltage matches the value printed on the back of the TV. Never connect the TV to the power outlet if the voltage is different. 18 Safety and Care 18.1 Risk of Injury to Children Safety Follow these precautions to prevent the TV from toppling over and causing injury to children: Important • Never place the TV on a surface covered by a cloth or other material that can be pulled away. • Ensure that no part of the TV hangs over the edge of the mounting surface.
Humidity In rare occasions, depending on temperature and humidity, minor condensation can occur on the inside of the TV glass front (on some models). To prevent this, do not expose the TV to direct sunlight, heat or extreme humidity. If condensation occurs, it will disappear spontaneously while the TV is playing for a few hours. The condensation moisture will not harm the TV or cause malfunction. 18.2 Screen Care Clean • Never touch, push, rub or strike the screen with any object.
CE compliance Hereby, TP Vision Europe B.V. declares that this television is in compliance with the essential requirements and other relevant provisions of Directives 2014/53/EU (RED), 2009/125/EC (Eco Design), 2010/30/EU (Energy Labelling) and 2011/65/EC (RoHS). 19 Terms of Use 2017 © TP Vision Europe B.V. All rights reserved. This product was brought to the market by TP Vision Europe B.V. or one of its affiliates, hereinafter referred to as TP Vision, which is the manufacturer of the product.
20 20.4 Copyrights Dolby Audio 20.1 Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories. MHL MHL, Mobile High-Definition Link and the MHL Logo are trademarks or registered trademarks of the MHL, LLC. 20.5 DTS 2.0 + Digital Out ™ For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS 2.
P1003.2/ISO 9945.2 Shell and Tools standard. It offers functional improvements over sh for both programming and interactive use. In addition, most sh scripts can be run by Bash without modification. Source: http://www.gnu.org/software/bash/ 21 Open Source 21.1 Open Source Software c-ares (1.10.0) c-ares is a C library that performs DNS requests and name resolves asynchronously. Source: http://c-ares.haxx.se/ This television contains open source software. TP Vision Europe B.V.
The GNU Find Utilities are the basic directory searching utilities of the GNU operating system. These programs are typically used in conjunction with other programs to provide modular and powerful directory search and file locating capabilities to other commands. Source: http://www.gnu.org/software/findutils/ Source: http://www.gnu.org/software/inetutils/ iptables (1.4.15) For Cross connection. Source: http://www.netfilter.
libusb. This piece of software is made available under the terms and conditions of the libusb license, which can be found below. Source: http://libusb.wiki.sourceforge.net http://www.libusb.org/ ain_Page mtd-utils The aim of the system is to make it simple to provide a driver for new hardware, by providing a generic interface between the hardware drivers and the upper layers of the system. Hardware drivers need to know nothing about the storage formats used, such as FTL, FFS2, etc.
procps (ps, top) (3.2.8) procps is the package that has a bunch of small useful utilities that give information about processes using the /proc filesystem. The package includes the programs ps, top, vmstat, w, kill, free, slabtop, and skill. Source: http://procps.sourceforge.net/index.html to run . This piece of software is made available under the terms and conditions of the u-Boot loader license, which can be found below. Source: http://www.denx.de udhcpc (0.9.8cvs20050303-3) Source: http://udhcp.
22 Disclaimer regarding services and/or software offered by third parties Services and/or software offered by third parties may be changed, suspended, or terminated without prior notice. TP Vision does not bear any responsibility in these sorts of situations.
Index Favourite Channel, Create 22 Favourite Channel, Edit 22 Favourite Channels 23 A Advanced Picture Settings 32 Advanced Settings 37 Advanced Sound Settings 35 Antenna 10 App Gallery 42 Audio Language 38 Audio Out Menu 35 Auto Clock Mode 38 G Gamma 33 General Settings 36 H HbbTV 38 HDMI 10 HDMI - CEC 36 HDMI ARC 11 HDMI Sound System 35 HDMI Ultra HD 37 HDR 33 Headphone Connection 12 Headphone Volume 35 Help Menu 3 Home Menu 31 Home or Shop 37 B Bass 34 Batteries 5 C CAM Operator Profile 36 CAM PIN 3
Picture Contrast Mode 33 Picture Format 34 Picture Motion 33 Picture Motion Style 33 Picture Style 31 Picture, Colour 32 Picture, Contrast 32 Picture, Sharpness 32 Power Cable 8 Problems 48 Product Fiche 44 Universal Access, Mixed Volume 39 Universal Access, Speakers or Headphones 39 Universal Access, Speech 39 Unlock Channel 23 Update Software 4 Update Software - Internet 4 Update Software - Local Updates 4 Update Software - OAD 4 Update Software - USB 4 USB Flash Drive 14 USB Hard Drive 36 USB Hard Drive
Powered by TCPDF (www.tcpdf.
