Firmware-Upgrade Software

• Resolve ambilight brightness and switch to audio mode issues.
 Resolve France Channel CNEWS HbbTV hang up issue.
 Resolve Chili App video playback issue.
 Resolve Delta volume setting not stored issue.
 Cyber security patch.
TPM177E_012.003.070.121 (Date published: 2018-11-01)
• Resolve UI issue in v101 software.
• Channel logo database v38 update.
TPM177E_012.003.070.101 (Date published: 2018-10-01)
• Resolve Youtube video volume changed issue
• Resolve HDMI PC input time lag issue.
• Resolve USB 2.0 HDD not recognized issue.
• Resolve Astra19.2 DVB-S channel list update issue.
 Resolve DVB-T “France3” channel issue.
 Resolve TV auto wake up or not able to wake up from standby due to wifi module firmware blocked
issue.
 Channel logo database v36 update.
TPM177E_012.002.070.201 (Date published: 2018-06-06)
• Resolved Miracast connection issue with mobile devices.
• Resolve Megogo App hung up issue.
• Resolve Netflix -100 error code issue.
• Add WPA2 security patch.
 Improve error recovery during TV start up.
TPM177E_012.002.070.181 (Date published: 2018-05-08)
• Resolve USB HDD video playback issue.
• Resolve USB HDD detection issue.
 Update channel logo (v29).
TPM177E_012.002.070.171 (Date published: 2018-03-21)
 Additional patch added for Netflix error TVQ-PM-100 issue (If Netflix error already seen before software
update, please do a re-install TV, remove the AC power to TV set, wait for a minute and re-apply the AC
power to the TV set.)
 Resolve DVB-C no respond to Ch+/- key and vol +/- key issue when zapping through the non-subscribed
channels.
 Cannot input symbol @ with Czech, Bosnia, Serbian and Slovakia USB keyboards.
 [Spain] Wrong TV3 HD channel logo
TPM177E_012.002.070.151 (Date published: 2018-03-02)
 Resolve Netflix error TVQ-PM-100 issue.
 Resolve slow zapping issue (Slovenia KRS DVB-C).
 Update channel logo (v25).
After software upgrade, if you still see the Netflix error message, please do the following :
1) Press setup key on RC, select “All settings” -> “General Settings” -> “Factory Settings”;