Register your product and get support at 6554 series www.philips.
Contents 1 Get Support 13.1 Setup Smart TV 44 13.2 Smart TV Start Page 13.3 App Gallery 44 3 1.1 Identify and Register your TV 3 1.2 TV Help and User Manual 3 1.3 On-line Help and User Manual 3 1.4 Consumer Care / Repair 3 2 Software 14 TV on Demand / Video on Demand 45 15 Netflix 5 5 5 2.1 Update Software 2.2 Software Version 3 Quick Guide 18 YouTube 7 19.1 End of Use 7 Channels 10 21 Troubleshooting 15 16 16 22 Safety and Care 25 22.1 Safety 57 22.
1 Ambilight function. Get Support 1.3 On-line Help and User Manual 1.1 Identify and Register your TV Identify your TV - TV model number and serial To solve any Philips TV related problem, you can consult our online support. You can select your language and enter your product model number. number You might be asked to provide the TV product model number and serial number. Find these numbers on the packaging label or on the type label on the back or bottom of the TV. Go to www.philips.com/TVsupport.
cause severe injury, irrepairable damage to your TV or void your warranty.
2 back on again. Please wait. Software Do not . . . • use the remote control • remove the USB memory device from the TV • press twice • press the power switch on the TV The TV switches itself off (for 10 seconds) and then back on again. Please wait. 2.1 Update Software Search for Updates The TV software has been updated. You can use the TV again. To prevent an accidental update of the TV software, delete the autorun.upg file from the USB memory device.
3 Quick Guide 3.1 Remote Control Batteries and Cleaning Replace batteries If the TV does not react on a key press on the remote control, the batteries might be empty. 1 - Standby / On To switch the TV on or back to Standby. To replace the batteries, open the battery compartment on the back of the remote control. 2 - INFO To open or close programme info. 1 - Slide the battery door in the direction shown by the arrow. 2 - Replace the old batteries with 2 type AAA-R03-1.5V batteries.
- OPTIONS To open or close the Options menu. 3.2 IR sensor The TV can receive commands from a remote control that uses IR (infrared) to send commands. If you use such a remote control, always make sure you point the remote control at the infrared sensor on the front of the TV. Bottom Warning Do not put any objects in front of IR sensor of the TV, it may block the IR signal. 1- To open the Netflix App directly. With the TV switched on or from standby.
4 Wall Mounting Setting Up Your TV is also prepared for a VESA-compliant wall mount bracket (sold separately). Use the following VESA code when purchasing the wall mount . . . 4.1 Read Safety Read the safety instructions first before you use the TV. To read the instructions, in Help > User manual, press the colour key Keywords and look up Safety and Care. 4.
Although this TV has a very low standby power consumption, unplug the power cable to save energy if you do not use the TV for a long period of time. On or Standby Before you switch on the TV, make sure you plugged in the mains power in the POWER connector on the back of the TV. Switch On • Press the small joystick key on the back of the TV. Switch to standby To switch the TV to standby, press on the remote control. You can also press the small joystick key on the back of the TV.
5 Connections 5.1 Connectivity guide Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound. When you connect a device, the TV recognizes its type and gives each device a correct type name. You can change the type name if you wish. If a correct type name for a device is set, the TV automatically switches to the ideal TV settings when you switch to this device in the Sources menu. 5.
Match the YPbPr (green, blue, red) connector colours with the cable plugs when you connect. Use an Audio L/R cinch cable if your device also has sound. Digital Audio Out - Optical Audio Out - Optical is a high quality sound connection. Composite This optical connection can carry 5.1 audio channels. If your device, typically a Home Theatre System (HTS), has no HDMI ARC connection, you can use this connection with the Audio In - Optical connection on the HTS.
mobile device. 2 - On your mobile device, select the TV. (This TV will be displayed as TV model name) 3 - Select the TV name on your mobile device, after connection, you can enjoy using Miracast. Stop Sharing You can stop sharing a screen from the TV or from the mobile device. From the device 5.6 With the application you use to start Miracast, you can disconnect and stop watching the screen of the device on TV. The TV will switch back to the last selected programme.
Reset Wi-Fi Miracast connections All previously connected devices are stored in the WiFi Miracast list of connections. To clear all connected Miracast devices… (Home) > Settings > All settings > Network > Reset Wi-Fi Miracast connections. Screen Delay The normal delay when sharing a screen with Miracast is about 1 second. The delay might be longer if you are using older devices with less processing power.
Warning The USB Hard Drive is formatted exclusively for this TV, you cannot use the stored recordings on another TV or PC. Do not copy or change recording files on the USB Hard Drive with any PC application. This will corrupt your recordings. When you format another USB Hard Drive, the content on the former will be lost. A USB Hard Drive installed on your TV will need reformatting for use with a computer. To read the instructions, in Help, press the colour key Keywords and look up USB Hard Drive.
6 Switch Source 6.1 Source List • To open the sources menu, press SOURCES . • To switch to a connected device, select the device with the arrows (Right) or (Left) and press OK. • To view the technical information of the connected device you are watching, press OPTIONS and select Device info. • To close the source menu without switching to a device, press SOURCES again. 6.2 Rename Device • Only CVBS, YPbPr, HDMI sources can be renamed or replace device icon.
for channels 7 Channels 1 - Select Start now and press OK. 2 - Select Update channels to only add new digital channels. 3 - Select Start and press OK to update channels. This can take a few minutes. 7.1 About Channels and Switch Channels Quick reinstall (Home) > Settings > Install Channels > Antenna/cable installlation > for channels To watch TV channels • Press . The TV tunes to the TV channel you last watched. • Press (Home) > TV > Channels and press OK. • Press + or - to switch channels.
frequency value to search for channels, select Advanced. the All channels list but also in the New channels list. Empty channels are removed. If new channels are found or if channels are updated or removed, a message is shown at TV start up. The TV must be in standby to automatically update channels. Frequency step size The TV searches for channels in steps of 8MHz. If this results in having no channels installed or if some channels are missing, you can search in smaller steps of 1MHz.
• Fine tune To fine tune a channel, select Fine tune and press OK. You can fine tune the channel with or . If you want to store the channel found, select Done and press OK. automatically. • Up to 4 Satellites - You can install up to 4 satellites (4 LNBs) on this TV. Select the exact number of satellites you wish to install at the start of the installation. This will speed up the installation. • Unicable - You can use a Unicable system to connect the antenna dish to the TV.
(Home) > Settings > Install Channels > Satellite installlation > satellite > Remove satellite Manual Installation Search for (Home) > Settings > Install Channels > Satellite installlation > installtion You can remove one or more satellites from your current satellite installation. You remove the satellite and its channels. Some satellite operators do not allow removing a satellite. Manually install satellite. • LNB - Select the LNB for which you want to add new channels.
Channel List copy To Installed TVs Introduction Depending on whether your TV is already installed or not, you must use a different method to upload a channel list. Channel list copy is intended for dealers and expert users. To an already installed TV 1 - Verify the country setting of the TV. (To verify this setting, see chapter Re-install channels. Start this procedure until you reach the country setting. Press BACK to cancel the installation.) If the country is correct continue with step 2.
language (the language set on TV), the TV can show subtitles automatically in one of your preferred subtitle languages. One of these subtitle languages must also be part of the broadcast. Channel info Select Channel info to view the technical information of the channel. You can select your preferred subtitle languages in Subtitle language. HbbTV on This Channel If you want to avoid access to HbbTV pages on a specific channel, you can block the HbbTV pages for this channel only.
Select Channel Range Channel List Options > OK > OPTIONS > Open Option Menu Select channel range Select a range of channels in a favourites channel list, once completed, press OK. To open the channel list option menu... • Press , to switch to TV. • Press OK to open the current channel list. • Press OPTIONS , and select one of options. • Press BACK to close the channel list.
With the TV Guide you can view a list of the current and scheduled TV programmes of your favourite channels. Along with your favourite channels, the first 3 most used channels from the broadcasters’ default list will be appended after your favourite channels for your preview. You need to add these channels into your favourite list to enable its operation (refer to "TV Guide" chapter). 7.
Some broadcasters offer T.O.P. Text. To open T.O.P. Text pages within Text, press OPTIONS and select T.O.P. overview. * The teletext can only be reached when the channels are installed directly on the TV’s internal tuner and the set is on TV mode. If a set-top box is being used, the teletext will be unavailable via TV. In that case, the set-top box’s teletext can be used instead.
8 Change Day TV Guide If the TV guide information comes from the broadcaster, you can press + to view the schedule of one of the next days. Press - to go back to the previous day. 8.1 What You Need Alternatively, you can press OPTIONS and select Change day. With the TV guide you can view a list of the current and scheduled TV programmes of your channels. Depending on where the TV guide information (data) is coming from, analogue and digital channels or only digital channels are shown.
* Freeview Play is only for UK models. Set a Recording You can set a recording in the TV Guide. To see the recording list, press Recordings , a programme set to be recorded is marked with a (red dot) on the front of the programme name. To record a programme… 1 - Press TV GUIDE and select a future or ongoing programme. 2 - Press the colour key Record . To cancel a recording… 1 - Press TV GUIDE and select the programme set for recording. 2 - Press the colour key Clear recording . 8.
9 To record a programme… Recording and Pause TV 1 - Press TV GUIDE. 2 - On the TV guide, select the channel and programme you wish to record. Press (Right) or (Left) to scroll through the programmes of a channel. 3 - With the programme highlighted, press the colour key Record . The programme is scheduled for recording. A warning will show automatically when overlapping recordings are scheduled.
8 - Select Schedule and press manual recording. OK to schedule the Replay The recording will appear in the list of scheduled recordings and reminders. Since the TV stores the broadcast you are watching, you can mostly replay the broadcast for a few seconds. To replay a current broadcast… Watch a Recording 1 - Press (Pause) 2 - Press (Rewind). You can press repeatedly to select from where you want to start viewing the paused broadcast. Press these keys repeatedly to change speed.
10 Photo Options Videos, Photos and Music With a photo on screen, press OPTIONS to… List/Thumbnails View photos with list view or thumbnails view. Shuffle off, Shuffle on View the pictures in sequential order, or at random. 10.1 From a USB Connection Repeat, Play once View the pictures repeatedly or once only. You can view your photos or play your music and videos from a connected USB flash drive or USB Hard Drive. Stop music Stop the music if the music playback is in progress.
360 Photo Options Video Options With a 360 photo on screen, press OPTIONS to… During the video playback, press OPTIONS to… List/Thumbnails View 360 photos with list view or thumbnails view. List/Thumbnails View video files with list view or thumbnails view. Shuffle off, Shuffle on View the pictures in sequential order, or at random. Subtitles Display the subtitles if available, select On, Off, or On during mute. Repeat, Play once View the pictures repeatedly or once only.
ideal sound settings. • Audio out - Set the TV to play the sound on TV or on the connected audio system. • Ambilight style* - Select one of preset Ambilight styles. • Ambilight+hue* - Switch Ambilight+hue on or off. • Sleep timer - Set the TV to switch to standby automatically after a preset time. • Screen off - If you only listen to music on TV, you can switch off the TV screen. 11 Open TV Setting Menus 11.1 Home Menu Overview Press (Home) to select one of below menus, then press OK.
not supported in Monitor mode. The TV is able to play HDR video in Monitor mode but no HDR processing will be applied. (Home) > Settings > All settings > Picture > Sharpness Press the arrows (up) or (down) to adjust the sharpness value of the picture. Custom a style You can adjust and stored picture settings in in the currently selected picture style, like Colour, Contrast or Sharpness.
Whitepoint alignment Video Contrast, Gamma Customise the whitepoint alignment based on the selected colour temperature of the picture. Press the arrows (up) or (down) to adjust the value, press Reset to reset the value. Video contrast (Home) > Settings > All settings > Picture > Expert mode settings > contrast Press the arrows (up) or video contrast level.
settings > Motion Styles To format the picture manually… Motion styles provides optimised motion setting modes for different video content. • Shift – select on the arrows to shift the picture. You can only shift the picture when it is zoomed in. • Zoom – select on the arrows to zoom in. • Stretch – select on the arrows to stretch the picture vertically or horizontally. • Undo – select to return to the picture format you started with.
press OK. The style is restored. Select On to automatically level out sudden volume differences. Typically when you are switching channels. Select Night mode for a more comfortable quiet listening experience. Customise Personal style 1 - Set the sound style to Personal mode. 2 - Press the colour key Customise, and press OK to change advanced sound settings.
capabilities of the connected Home Theatre System. Channels • Stereo (uncompressed): If your audio playback devices have no multichannel sound processing, select to only output stereo content to your audio playback devices. • Multichannel: Select to output multichannel audio content (compressed multichannel sound signal) or stereo audio content to your audio playback devices. • Multichannel (bypass): Select to send original bitstream from HDMI ARC to the connected HDMI Sound System.
property of their respective owners. USB Keyboard Settings (Home) > Settings > All settings > General settings > USB keyboard settings HDMI Ultra HD To install the USB keyboard, switch on the TV and connect the USB keyboard to one of the USB connections on the TV. When the TV detects the keyboard for the first time, you can select your keyboard lay-out and test your selection.
Turn On/Off the Demo Me autostart. Set TV switch off timer (Home) > Settings > All settings > General settings > Eco settings > Switch off timer Manage demos Press the arrows (up) or (down) to adjust the value. The value 0 (Off) deactivates the automatic switch off. (Home) > Apps > Demo me > Manage demos If the TV is set to Shop, you can manage the demo videos in Demo me app. Select Switch off timer, the TV switches off automatically to save energy.
Viewing Data language > Language > Primary subtitle, Secondary subtitle This takes you to the Viewing data settings where you can enable or disable the collection of your viewing data by Inscape Data, Inc. (Inscape) and provides access to the Inscape's Privacy policy that explains how viewing Data is collected (if you enable collection) and used. Digital channels can offer several subtitle languages for a programme. You can set a preferred primary and secondary subtitle language.
Select one of the time zones. the commentary audio, like stereo or fading sound. • Select Speech to set speech preference, Descriptive or Subtitles. Set the TV to switch to Standby automatically after a preset time Dialogue enhancement (Home) > Settings > All settings > Region and language > Clock > Sleep timer. (Home) > Settings > All settings > Universal access > Dialogue enhancement Set the TV to switch to Standby automatically after a preset time.
select OK to make the connection immediately. 3 - A message will be shown when the connection is successful. 12 Wireless and Networks Make the Connection - WPS (Home) > Settings > All settings > Wireless and networks > Connect to network > WPS 12.1 Home Network If your router has WPS, you can directly connect to the router without scanning for networks. If you have devices in your wireless network that use the WEP security encryption system, you cannot use WPS.
connection. 2 - You can set the number for IP Address, Netmask, Gateway, DNS 1, or DNS 2. Switch On with Wi-Fi (WoWLAN) (Home) > Settings > All settings > Wireless and networks > Switch On with Wi-Fi (WoWLAN) You can switch this TV on from your smartphone or tablet if the TV is in Standby. The setting Switch On with Wi-Fi (WoWLAN) must be switched on.
server registration and parental rating settings, your video store app logins, all Philips App Gallery favourites, Internet bookmarks and history. Interactive MHEG applications can also save so-called 'cookies', on your TV. These files will also be cleared.
App gallery does not hold what you are looking for, try the World Wide Web and surf the Internet on TV. 13 Smart TV Search With Search, you can search the App Gallery for relevant Apps. Enter a keyword in the text field, select and press OK to start searching. You can enter names, titles, genres and description keywords to search. Alternatively, you can leave the text field empty and search for the most popular searches/keywords for a range of categories.
14 TV on Demand / Video on Demand TV on Demand (Home) > Apps > TV on Demand You can watch TV programmes you missed or watch your favourite programmes whenever it suits you best. Video on Demand (Home) > Apps > Video on Demand You can rent movies from an online rental video store.
15 Netflix If you have a Netflix menbership subscription, you can enjoy Netflix on this TV. Your TV must be connected to the Internet. To open Netflix, press to open the Netflix App. You can open Netflix immediately from a TV in standby. www.netflix.
16 Rakuten TV Watch the latest new releases on your Smart TV. The biggest blockbusters, award winning classics and TV series available instantly. Press the Rakuten TV key on your remote control or the app icon to open the Rakuten TV app. Your TV must be connected to the Internet to use the app. For more information about Rakuten TV, please visit www.rakuten.tv.
17 Amazon Prime Video With an Amazon prime membership, you gain access to thousands of popular movies and TV show, including exclusive Prime Originals. Press the app icon to open the Amazon Prime Video app. Your TV must be connected to the Internet to use the app. For more information about Amazon Prime Video, please visit www.primevideo.com.
18 YouTube YouTube provides a platform to connect to the world. Watch and discover popular videos that uploaded by YouTube users around the world. Use the YouTube app to explore the latest topics on music, news, and more. Press the app icon to open the YouTube app. Your TV must be connected to the Internet to use the app. For more information about YouTube, please visit www.youtube.com.
19 Environmental 19.1 End of Use Disposal of your old product and batteries Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2012/19/EU. Please inform yourself about the local separate collection system for electrical and electronic products.
20 20.4 Specifications Supported Input Resolution Video 20.1 Power Support Timing Product specifications are subject to change without notice. For more specification details of this product, see www.philips.com/TVsupport Video support timing also includes field/frame rate 23.976Hz, 29.97Hz and 59.94Hz.
• Image Codec : JPEG, GIF, PNG, BMP, HEIF, 360 photo 20.5 Supported Input Resolution Computer Wi-Fi Certified This TV supports Miracast certified devices. Performance may vary, depending on the capabilities of the mobile device and the software used. • 640 x 480 - 60Hz • 800 x 600 - 60Hz • 1024 x 768 - 60Hz • 1280 x 800 - 60Hz • 1280 x 960 - 60Hz • 1280 x 1024 - 60Hz • 1366 x 768 - 60Hz • 1440 x 900 - 60Hz • 1920 x 1080 - 60Hz • 3840 x 2160 - 60Hz 20.
21 respond to the remote control. Troubleshooting Creaking sound at startup or switch off When you are turning the TV on or standby, you hear a creaking sound from the TV chassis. The creaking sound is due to the normal expansion and contraction of the TV as it cools and warms up. This does not affect performance. 21.1 Tips If you can't find a solution for your TV problem in Troubleshooting, you can use Keywords in Help > User manual to find the information you are looking for.
digital channels available. • Check if you selected the correct DVB (Digital Video Broadcast) system. Select DVB-T (terrestrial) when you use an antenna or common antenna, select DVBC (cable) if you use a TV cable service. • Redo the installation and check if you select the correct country and system. • If the TV finds one satellite but cannot find a second one, turn the dish a few degrees. Align the dish to get the strongest signal on the first satellite.
Call the telephone number for your country. (Home) > Settings > All settings > General settings > Location Sound but no picture • Change to other video sources and then change back to current source. • Select Picture style and select a style and press OK. (Home) > Settings > All settings > Picture > Picture style • Restore picture style, select back to Picture style, then press Restore style. • Reset all TV settings, go to (Home) > Settings > All settings > General settings > Reinstall TV.
21.8 21.10 HDMI - UHD Wi-Fi and Internet HDMI • Note that HDCP (High-bandwidth Digital Content Protection) support can delay the time taken for a TV to display content from an HDMI device. • If the TV does not recognise the HDMI device and no picture is displayed, switch the source from one device to another and back again. • This is an Ultra HD TV. Some older devices connected with HDMI - do not recognise an Ultra HD TV electronically and might not work correctly or show distorted picture or sound.
ensure that the power voltage matches the value printed on the back of the TV. Never connect the TV to the power outlet if the voltage is different. 22 Safety and Care 22.1 Risk of Injury to Children Safety Follow these precautions to prevent the TV from toppling over and causing injury to children: Important • Never place the TV on a surface covered by a cloth or other material that can be pulled away. • Ensure that no part of the TV hangs over the edge of the mounting surface.
Humidity In rare occasions, depending on temperature and humidity, minor condensation can occur on the inside of the TV glass front (on some models). To prevent this, do not expose the TV to direct sunlight, heat or extreme humidity. If condensation occurs, it will disappear spontaneously while the TV is playing for a few hours. The condensation moisture will not harm the TV or cause malfunction. 22.2 Screen Care Clean • Never touch, push, rub or strike the screen with any object.
CE compliance Hereby, TP Vision Europe B.V. declares that this television is in compliance with the essential requirements and other relevant provisions of Directives 2014/53/EU (RED), 2009/125/EC (Eco Design) and 2011/65/EC (RoHS). 23 Terms of Use 2019 © TP Vision Europe B.V. All rights reserved. This product was brought to the market by TP Vision Europe B.V. or one of its affiliates, hereinafter referred to as TP Vision, which is the manufacturer of the product.
24 Copyrights 24.1 HDMI The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries. 24.4 DTS-HD (italics) DTS® offers decoding of DTS content for up to 5.1 discrete channels with support for low bit rate and streaming media. It supports transcoding of content via digital output such as HDMI for playback on legacy products. 24.
P1003.2/ISO 9945.2 Shell and Tools standard. It offers functional improvements over sh for both programming and interactive use. In addition, most sh scripts can be run by Bash without modification. Source: http://www.gnu.org/software/bash/ 25 Open Source 25.1 Open Source Software c-ares (1.10.0) c-ares is a C library that performs DNS requests and name resolves asynchronously. Source: http://c-ares.haxx.se/ This television contains open source software. TP Vision Europe B.V.
The GNU Find Utilities are the basic directory searching utilities of the GNU operating system. These programs are typically used in conjunction with other programs to provide modular and powerful directory search and file locating capabilities to other commands. Source: http://www.gnu.org/software/findutils/ Source: http://www.gnu.org/software/inetutils/ iptables (1.4.15) For Cross connection. Source: http://www.netfilter.
libusb. This piece of software is made available under the terms and conditions of the libusb license, which can be found below. Source: http://libusb.wiki.sourceforge.net http://www.libusb.org/ ain_Page mtd-utils The aim of the system is to make it simple to provide a driver for new hardware, by providing a generic interface between the hardware drivers and the upper layers of the system. Hardware drivers need to know nothing about the storage formats used, such as FTL, FFS2, etc.
procps (ps, top) (3.2.8) procps is the package that has a bunch of small useful utilities that give information about processes using the /proc filesystem. The package includes the programs ps, top, vmstat, w, kill, free, slabtop, and skill. Source: http://procps.sourceforge.net/index.html to run . This piece of software is made available under the terms and conditions of the u-Boot loader license, which can be found below. Source: http://www.denx.de udhcpc (0.9.8cvs20050303-3) Source: http://udhcp.
26 Disclaimer regarding services and/or software offered by third parties Services and/or software offered by third parties may be changed, suspended, or terminated without prior notice. TP Vision does not bear any responsibility in these sorts of situations.
Index A G Advanced Picture Settings 32 Advanced Sound Settings 35 Antenna 10 App Gallery 44 App lock 40 Audio Language 39 Audio Out Menu 35 Auto Clock Mode 39 Gamma 33 General Settings 36 Get Support 3 H HbbTV 36 HDMI 10 HDMI - CEC 37 HDMI ARC 11 HDMI Sound System 35 HDMI Ultra HD 37 HDR 33 Headphone Connection 11 Headphones 35 Help Menu 3 Home Menu 31 Home or Shop 38 B Batteries 6 C CAM PIN 40 Channel List 21 Channel List Copy 20 Channel Options 20 Channel, Channel Filter 22 Channel, Rename Channel 2
Picture, Colour 32 Picture, Contrast 32 Picture, Sharpness 32 Power Cable 8 Problems 53 Update Software - USB 5 USB Flash Drive 13 USB Hard Drive 36 USB Hard Drive - Format 14 USB Hard Drive - Install 13 USB Hard Drive Connection 13 USB Keyboard Settings 37 User Manual 3 Q Quick Picture Settings 34 Quick Settings Menu 31 V R Video Contrast 33 Video on Demand 45 View Network Settings 42 Viewing Distance 8 Reception 51 Recordings 27 Register TV 3 Remote Control 6 Remote Control - IR Sensor 7 Remote Cont
Powered by TCPDF (www.tcpdf.
