Register your product and get support at 8700 series www.philips.
Contents 1 TV Tour 8.4 TV Guide 33 8.5 Text / Teletext 8.6 Interactive TV 4 1.1 Ultra HD TV 4 1.2 Philips Android TV™ 4 1.3 Using Apps 4 1.4 Playing Games 4 1.5 Movies and missed programmes 1.6 Pause TV and Recordings 4 1.7 Social Networks 5 1.8 3D 5 1.9 Ambilight 5 1.10 Ambilight + Hue 5 2 Setting Up 10 Sources 11 Apps 6 13 3D 5 Switching On and Off 14 Multi View 45 14.1 Text and TV 45 14.2 App Gallery and TV 14.3 HDMI and TV 45 15 Settings 45 46 15.1 Picture 46 15.2 Sound 50 15.
18.8 Sound 109 18.9 Multimedia 110 19 Help and Support 111 19.1 Register 111 19.2 Troubleshooting 111 19.3 Help 112 19.4 Online Help 112 19.5 Repair 113 20 Safety and Care 20.1 Safety 114 20.2 Screen Care 114 115 21 Terms of Use_TV 116 22 Terms of Use_Smart TV 23 Copyrights 117 118 23.1 Ultra HD 118 23.2 HDMI 118 23.3 Dolby Digital Plus 118 23.4 DTS Premium Sound ™ 118 23.5 DLNA Certified® 118 23.6 Microsoft 118 23.7 Wi-Fi Alliance 119 23.8 Kensington 119 23.
Google, Android, Google Play and other marks are trademarks of Google Inc. The Android robot is reproduced or modified from work created and shared by Google and used according to terms described in the Creative Commons 3.0 Attribution License. 1 TV Tour 1.1 Ultra HD TV http://creativecommons.org/licenses/by/3.0/legalco de This TV has an Ultra HD display. Its resolution is four times as much as normal HD displays. Ultra HD means 8 million pixels for the most refined and lifelike picture on TV. 1.
1.6 1.10 Pause TV and Recordings Ambilight + Hue If you connect a USB Hard Drive, you can pause and record a broadcast from a digital TV channel. Your Ambilight TV Philips' unique Ambilight technology goes beyond the ordinary. It not only makes your screen seem much wider, it also makes your viewing experience more immersive by projecting an extra-wide glow from the sides of your TV screen onto the surrounding wall.
• 65PUS8700 VESA MIS-F 400x400, M6 (Minimum 40 mm, Maximum 43 mm) 2 Setting Up Caution 2.1 To read the instructions, press the colour key Keywords and look up Safety instructions. Wall mounting the TV requires special skills and should only be performed by qualified personnel. The TV wall mounting should meet safety standards according to the TVs weight. Also read the safety precautions before positioning the TV. TP Vision Europe B.V.
Press the colour key Keywords and look up Switching On for more information on switching the TV on or off. During the satellite installation, select One Tuner. 2.5 Antenna Cable Insert the antenna plug firmly into the Antenna socket at the back of the TV. You can connect your own antenna or an antenna signal from an antenna distribution system. Use an IEC Coax 75 Ohm RF antenna connector. Two Tuners Use this antenna connection for DVB-T and DVB-C input signals.
6 - Depending on the type of router, enter your encryption key - WEP, WPA or WPA2. If you entered the encryption key for this network before, you can select OK to make the connection immediately. 7 - A message will be shown when the connection is successful. 3 Network 3.1 Smart TV and Internet No Smart TV without the Internet. WPS This Smart TV is no smart TV without being connected to your home network and the Internet.
3.3 Internet does not work • If the connection to the router is OK, check the router connection to the Internet. Network Settings The PC and Internet connection are slow • Look in your wireless router's user manual for information on indoor range, transfer rate and other factors of signal quality. • Use a high-speed (broadband) Internet connection for your router. View Network Settings You can view all current network settings here. The IP and MAC address, signal strength, speed, encryption method, etc.
Switch on Wi-Fi connection TV Network Name You can switch on or off Wi-Fi connection on your TV. If you have more than one TV in your home network, you can give the TV a unique name. To switch on Wi-Fi… To change the TV name… 1 - Press , select All Settings and press OK. 2 - Select Wireless and Networks and press (right) to enter the menu. 3 - Select Wired or Wi-Fi > Wi-Fi On/Off and press OK. 4 - Select On and press OK. 5 - Press (left) repeatedly if necessary, to close the menu.
than 5 m. 4 Connections 4.1 Tips on Connections Connectivity Guide Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound. Copy protection HDMI cables support HDCP (High-bandwidth Digital Content Protection). HDCP is a copy protection signal that prevents copying content from a DVD disc or Bluray Disc. Also referred to as DRM (Digital Rights Management).
Some very specific device keys might not be available in the Controls menu. Only devices that support EasyLink Remote Control function will respond to the TV remote control. EasyLink Settings EasyLink HDMI CEC The TV comes with the EasyLink settings switched on. If your devices are connected with HDMI and have EasyLink, you can operate them with the TV remote control. EasyLink HDMI CEC must be switched On on the TV and the connected device.
Copy protection Audio Out - Optical DVI and HDMI cables support HDCP (High-bandwidth Digital Content Protection). HDCP is a copy protection signal that prevents copying content from a DVD disc or Blu-ray Disc. Also referred to as DRM (Digital Rights Management). Audio Out - Optical is a high quality sound connection. This optical connection can carry 5.1 audio channels.
1 - Look on the CAM for the correct method of insertion. Incorrect insertion can damage the CAM and TV. 2 - While looking at the back of the TV, with the front of the CAM facing towards you, gently insert the CAM into the slot. 3 - Push the CAM in as far as it will go. Leave it in the slot permanently. One Smart Card Digital TV operators provide a CI+ module (Conditional Access Module - CAM) and an accompanying smart card, when you subscribe to their premium programmes.
Connect with HDMI ARC Use an HDMI cable to connect a Home Theatre System (HTS) to the TV. You can connect a Philips Soundbar or an HTS with a built-in disc player. HDMI ARC If your Home Theatre System has an HDMI ARC connection, you can use any HDMI connection on the TV to connect. With HDMI ARC, you do not need to connect the extra audio cable. The HDMI ARC connection combines both signals. All HDMI connections on the TV can offer the Audio Return Channel (ARC) signal.
can set a delay on most Home Theatre Systems with a disc player to match the sound with the video. Audio Out Delay For more information, press the colour key Keywords and look up Audio to Video Sync. With a Home Theatre System (HTS) connected to the TV, the picture on TV and the sound from the HTS should be synchronised. Automatic audio to video sync With recent Philips Home Theatre Systems, the audio to video sync is done automatically and always correct.
Problems with HTS sound Sound with loud noise If you watch a video from a plugged in USB flash drive or connected computer, the sound from your Home Theatre System might be distorted. This noise is heard when the audio or video file has DTS sound but the Home Theatre System has no DTS sound processing. You can fix this by setting the Audio Out Format of the TV to Stereo. Press for All Settings > Sound > Format.
Connect a Gamepad To play games from the Internet on this TV, you can connect a selected range of wireless Gamepads. When you connect the Gamepad, you can use it immediately. To connect a Gamepad… YPbPr 1 - Plug in the small nano receiver in one of the USB connections on the side of the TV. The wireless nano receiver comes with the Gamepad. 2 - If the Gamepad is switched on, you can use the Gamepad. Connect the game console with a component video cable (Y Pb Pr) and an audio L/R cable to the TV.
minimum of 250GB disk space. If you want to record a broadcast with TV guide data from the Internet, you need to have the Internet connection installed on your TV before you install the USB Hard Drive. Connect Connect a USB keyboard (USB-HID type) to enter text on your TV. For more information on how to install a USB Hard Drive, press the colour key Keywords and look up USB Hard Drive, Installation. You can connect a keyboard and a mouse to the TV. Use one of the USB connections to connect.
4.12 4.14 USB Flash Drive Camcorder You can view photos or play your music and videos from a connected USB flash drive. HDMI Insert a USB flash drive in one of the USB connections on the TV while the TV is switched on. For best quality, use an HDMI cable to connect the camcorder to the TV. The TV detects the flash drive and opens a list showing its content. If the contents list does not appear automatically, press SOURCES and select USB.
With DVI to HDMI Alternatively, you can use a DVI to HDMI adapter (sold separately) to connect the PC to HDMI and an audio L/R cable (mini-jack 3.5mm) to AUDIO IN L/R on the back of the TV. Settings If your computer is added as a Computer type of device in the Source menu (the list of connections), the TV is set to the ideal Computer setting automatically. If you use your computer to watch movies or use it to play games, you might want to set the TV back to the ideal TV watching or gaming setting.
5 Switching On and Off 5.1 On or standby 5.3 Keys on TV Before you switch on the TV, make sure you plugged in the mains power in the POWER connector on the back of the TV. If you lost the remote control or its batteries are empty, you can still do some basic TV operations. To put the TV in Standby when the indicator light is off, press the small joystick key on the back of the TV. The indicator will light up.
5.5 Switch Off Timer If the TV receives a TV signal but you don't press a key on the remote control during a 4 hour period, the TV switches off automatically to save energy. Also, if the TV does not receive a TV signal nor a remote control command for 10 minutes, the TV switches off automatically. If you use the TV as a monitor or use a digital receiver to watch TV (a Set-Top Box - STB) and you do not use the remote control of the TV, you should deactivate this automatic switch off.
6 Remote Control 6.1 Key overview Top 1 To open TV menus. 2 - SOURCES To open the Sources menu. 3 - INFO To open or close programme info. 1 - Standby / On To switch the TV on or back to Standby. 2- 4 - BACK To switch back to the previous channel you selected. To close a menu without changing a setting. To go back to the previous App/Internet page. VOICE microphone 3- To open the Netflix App directly (if available). With the TV switched on or from standby.
1 - Azerty character Character position if the keyboard layout is set to Azerty. 2 - Shift To type uppercase characters. 3 - Ω Special characters To open the onscreen keyboard to select accented characters or symbols. 1 - MULTIVIEW To open an extra small screen. 4 - Fn key To type a number or punctuation character. 2 Volume To adjust the volume level. 3 - Number keys To select a channel directly.
7 - Share this To share online what you are watching at the moment. 8- Navigation and Accented Letters and Symbols Accented characters and symbols are not directly available on the Remote Control Keyboard. To type such a character, you can open the onscreen keyboard. OK * Your remote control has a Qwerty/Azerty or a Qwerty/Cyrillic keyboard, depending on your region. To open the onscreen keyboard, press Ω. In the onscreen keyboard, you can navigate to the character you need.
When you started the initial TV installation, the TV invited you to press the OK key, and by doing so, the pairing was done. When you switch off the TV, the pairing is stored. You can pair up to 5 remote controls with this TV. 6.5 Batteries The TV will notify you when the battery power of the remote control is low. To replace the batteries, open the battery compartment on the keyboard side of the remote control. Pairing Again You can pair another remote control with this TV.
7 Home and TV menu 7.1 Open the Home Menu About the Home Menu To enjoy the benefits of your Android TV, connect the TV to the Internet. Like on your Android smartphone or tablet, the Home menu is the centre of your TV. From the Home menu you can start any application, switch to a TV channel, rent a movie, open a website or switch to a connected device. Depending on your TV setup and your country the Home menu can contain different items.
press OPTIONS. 2 - Select Select Channel List and press OK. 3 - In the list menu, select one of the available channel lists and press OK. 8 Channels 8.1 Alternatively, you can select the list name at the top of the channel list and press OK to open the list menu. Channel Lists Tip About Channel Lists You can easily switch between the two tuners in the Sources menu. Press SOURCES and select Watch TV to switch to the Antenna/Cable tuner. Select Watch Satellite to switch to the satellite tuner.
locked channel is marked with a (lock). 6 - Press (left) to go back one step or press to close the menu. press OK. 6 - Select Search Channel and press OK to open a text field.You can use the remote control keyboard or the onscreen keyboard to enter text. 7 - Enter a number, a name or part of a name and select Apply and press OK. The TV will search for matching channel names in the list you selected. To unlock a channel… 1 - Press . 2 - Press OK to open the channel list.
Channel Options in one of these languages are available, the TV will show the subtitles you selected. Open Options To set the primary and secondary subtitle language… 1 - Press , select All Settings and press OK. 2 - Select Region and Language and select Languages > Primary Subtitles or Secondary Subtitles. 3 - Select the language you need and press OK. 4 - Press (left) to go back one step or press to close the menu. While watching a channel, you can set some options.
press (right). 3 - Select Mono or Stereo and press OK. 4 - Press (left) to go back one step or press to close the menu. Common Interface If you installed a CAM in one of the Common Interface slots, you can view the CAM and operator information or do some CAM related settings. To view the CAM information… Video Selection 1 - Press SOURCES. 2 - Select the channel type you are using the CAM for, Watch TV or Watch Satellite. 3 - Press OPTIONS and select Common Interface.
7 - To finish adding channels, press BACK. Remove a Favourites List The TV will ask to rename the Favourites List. You can use the on screen keyboard or use the keyboard on the back of the remote control. You can only remove a Favourites List. To remove a Favourites List… 1 - Press BACK to hide the on screen keyboard. 2 - Use the keyboard on the back of the remote control to delete the current name and enter a new name. 3 - When done, turn the remote control, select Close and press OK.
decoder. To call up the details of the selected programme, press INFO . The TV comes with the information set to From the broadcaster. If TV Guide information comes from the Internet, the TV Guide can also list analogue channels next to the digital channels. The TV Guide menu also shows a small screen with the current channel. Change Day From the Internet If the TV Guide information comes from the broadcaster, you can press + to view the schedule of one of the next days.
Some broadcasters offer T.O.P. Text. To open T.O.P. Text pages within Text, press OPTIONS and select T.O.P. overview. • Enlarge To enlarge the Text page for comfortable reading. • Reveal To unhide hidden information on a page. • Cycle subpages To cycle subpages when these are available. • Language To switch the group of characters that Text uses to display correctly. • Text 2.5 To activate the Text 2.5 for more colours and better graphics.
referred to as Digital Text or Red button. But each system is distinct. Visit the broadcaster's Internet website for more information. What You Need Interactive TV is only available on digital TV channels. To enjoy the full benefits of Interactive TV, you need a high-speed (broadband) Internet connection to the TV. HbbTV If a TV channel offers HbbTV pages, you must first switch on HbbTV in the TV settings to view the pages. 1 - Press , select All Settings and press OK.
9 when Now on TV is available. Top Picks The TV does not store former recommendations. 9.1 Using Now on TV About Top Picks To open Now on TV… With TOP PICKS your TV recommends current TV programmes, the latest rental videos and Online TV services for you to watch. Make sure you agree to the Terms of Use. To enjoy Top Picks connect your TV to the Internet. 1 - Press TOP PICKS to open the Top Picks menu. 2 - Select Now on TV at the top of the screen and press OK. 3 - Press BACK to close.
When you open TV on Demand, the TV may need a few seconds to refresh the page information. You can select a specific broadcaster if more than one is available. 9.4 Video on Demand About Video on Demand With Video on Demand , you can rent movies from an online rental video store. You can let Video on Demand do some personalised recommendations of movies, based on your country, the TV installation and the programmes you watch regularly.
10 10.3 Sources One Touch Play 10.1 With the TV in Standby, you can switch on a disc player with your TV remote control. Switch to a device Play To switch on both disc player and TV from Standby and start playing the disc immediately, press (play) on the TV remote control. The device must be connected with an HDMI cable and both TV and device must have HDMI CEC switched on. From the list of Sources, you can switch to a connected device and watch its programme.
11 Apps 11.1 About Apps With Apps in the Home menu, you open the Apps pages. The Apps pages show the collection of Apps (Applications) on your TV. Like Apps on your smartphone or tablet, the Apps on your TV offer specific functions for an enriched TV experience. Apps like TV games or weather forecasts (a.o.). Or start an Internet browser App to surf the Internet. Apps can come from the Philips App Gallery or the Google Play™ store. To get you started, some practical Apps are pre-installed on your TV.
press SOURCES , select SimplyShare. 12 Videos, Photos and Music 12.1 From a USB Connection You can view your photos or play your music and videos from a connected USB flash drive or USB Hard Drive. With the TV switched on, plug in a USB flash drive or a USB Hard Drive to one of the USB connections. The TV detects the device and will list your Media files. If the list of files does not appear automatically, press SOURCES and select USB.
13 the 3D glasses. 3D • If the LED light blinks green, you can use the glasses for 4 hours or more. • If the LED light blinks orange, you can use the glasses for at least 2 hours but less than 4 hours. • If the LED light blinks red, the battery is almost empty and less than 2 hours of 3D watching remain. 13.1 What You Need Switch Off This is an active 3D TV. On this TV, you can watch 3D programmes and movies in full High Definition resolution. To switch off the 3D glasses, press .
severe internal burns in just 2 hours and can lead to death. • Keep new and used batteries away from children. • If the battery compartment does not close securely, stop using the product and keep it away from children. • If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. 3D Format When the TV switches to 3D or when a notification is shown that 3D is available, put on your 3D glasses.
13.6 Health Warning • Watching 3D is not recommended for children under the age of six. • If you or your family have a history of epilepsy or photosensitive seizures, consult a medical professional before exposing yourself to flashing light sources, rapid image sequences or 3D viewing. • If you experience any discomfort, stop watching 3D and do not immediately engage in any potentially hazardous activity (for example driving a car) until your symptoms have disappeared.
14 Multi View 14.1 Text and TV You can watch a TV channel in the small screen of Multi View when you're watching Text. To watch a TV channel while watching Text… 1 - Press MULTI VIEW . 2 - Select Multi View: On on screen. The channel you were watching appears in the small screen. 3 - Press or to switch channels in the small screen. To hide the small screen, press MULTI VIEW again and select Multi View: Off on screen. 14.
1 - Press , select All Settings and press OK. 2 - Select General Settings and press (right) to enter the menu. 3 - Select Location > Home and press OK. 4 - Press (left) repeatedly if necessary, to close the menu. 15 Settings 15.1 Picture Picture Style Picture Settings Select a Style Colour For easy picture adjustment, you can select a preset Picture Style. With Colour, you can adjust the colour saturation of the picture. 1 - While watching a TV channel, press .
select the device type you want to use. To switch back to TV, select Off. 4 - Press (left) repeatedly if necessary, to close the menu. 3D Picture Settings 3D Contrast If you are watching 3D pictures, you can adjust the contrast of the 3D picture with 3D Contrast . To adjust the 3D contrast… Colour Settings 1 - Press , select All Settings and press OK. 2 - Select Picture and press (right) to enter the menu. 3 - Select 3D Contrast and press (right).
the menu. the menu. Custom Colour Temperature Brightness With Custom Colour Temperature, you can set a colour temperature yourself. To set a custom colour temperature, first select Custom in the Colour Temperature menu. Custom Colour Temperature is a setting intended for expert users. With Brightness, you can set the level of brightness of the picture signal. Brightness is a setting intended for expert users.
2 - Select Picture and press (right) to enter the menu. 3 - Select Advanced > Sharpness > Noise Reduction, and press (right) to enter the menu. 4 - Select Maximum, Medium, Minimum or Off. 5 - Press (left) repeatedly if necessary, to close the menu. Light Sensor The Light Sensor adjusts the picture and Ambilight settings automatically to the lighting conditions of the room. You can switch Light Sensor on or off. To switch on or off… 1 - Press , select All Settings and press OK.
3 - Press (left) repeatedly if necessary, to close the menu. • Fill Screen – automatically enlarges the picture to fill the screen. Picture distortion is minimal, subtitles remain visible. Not suitable for PC input. Some extreme picture formats can still show black bars. • Fit to Screen – automatically zooms in the picture to fill the screen without distortion. Black bars may be visible. Not suitable for PC input. next setting. 6 - Finally select Finish.
To set the surround mode… Sound Settings 1 - Press , select All Settings and press OK. 2 - Select Sound and press (right) to enter the menu. 3 - Select Surround mode and press OK. 4 - Select Stereo, or Incredible surround 3D. 5 - Press (left) repeatedly if necessary, to close the menu. Bass With Bass, you can adjust the level of low tones in the sound. To adjust the level… 1 - Press , select All Settings and press OK. 2 - Select Sound and press (right) to enter the menu.
4 - Select On or Off, then press OK. 5 - Press (left) repeatedly if necessary, to close the menu. Audio Out Offset If you cannot set a delay on the Home Theatre System, you can set a delay on the TV with Audio Out Offset. Audio Out Format To synchronise the sound on the TV… With Audio Out Format you can set the audio out signal of the TV to fit the sound processing capabilities of your Home Theatre System. 1 - Press , select All Settings and press OK.
1 - Press , select All Settings and press OK. 2 - Select Sound and press (right) to enter the menu. 3 - Select Advanced and press (right) to enter the menu. 4 - Select TV Speakers and press (right) to enter the menu. 5 - Select TV Speakers On, TV Speakers Off, EasyLink, or EasyLink Autostart . 6 - Press (left) repeatedly if necessary, to close the menu. Speaker and press OK. 4 - Press (left) repeatedly if necessary, to close the menu.
Ambilight Style Ambilight Saturation You can set a style for Ambilight. There are several dynamic styles and one static style – a constant colour. For the static style you can select the colour yourself. Alternatively, you can switch Ambilight off. With Ambilight Saturation, you can set the level of colour saturation of the Ambilight. To adjust the level… 1 - Press , select All Settings and press OK. 2 - Select Ambilight and press (right) to enter the menu. 3 - Select Saturation and press OK.
2 - Select Ambilight and press (right) to enter the menu. 3 - Select Advanced > TV Switch Off and press OK. 4 - Select Fade Out to Off or Immediate Switch Off. 5 - Press (left) repeatedly if necessary, to close the menu. Ambilight + Hue Configure With Configure, you can setup your Philips Hue bulbs to follow the colours of Ambilight. To setup your Philips Hue bulbs… 1 - Press , select All Settings and press OK. 2 - Select Ambilight and press (right) to enter the menu.
and press OK. 4 - Select Off, then press OK. 5 - Press (left) repeatedly if necessary, to close the menu. Light Sensor Reset Configuration To save energy, the built-in ambient light sensor lowers the brightness of the TV screen when the surrounding light darkens. The built-in light sensor automatically adjusts the picture, together with Ambilight, to the lighting conditions of the room. To reset Ambilight+hue... To activate the light sensor… 1 - Press , select All Settings and press OK.
4 - Select Off. 5 - Press (left) repeatedly if necessary, to close the menu. USB Hard Drive To set up and format a USB Hard Drive... 1 - Press , select All Settings and press OK. 2 - Select General Settings and press (right) to enter the menu. 3 - Select USB Hard Drive, and press OK. 4 - Select Start, then follow the instructions on screen. 5 - Press (left) repeatedly if necessary, to close the menu.
enter the menu. 3 - Select USB Keyboard Settings, and press OK to start the keyboard setup. location. Shop Setup HbbTV If the TV is set to Shop, you can set the availablility of a specific demo for in store use. If a TV channel offers HbbTV pages, you must first switch on HbbTV in the TV settings to view the pages. 1 - Press , select All Settings and press OK. 2 - Select General Settings and press (right) to enter the menu. 3 - Select HbbTV, and press OK. 4 - Select On or Off.
Factory Settings If you forgot your PIN code, you can override the current code and enter a new code. You can set the TV back to the original TV settings (the factory settings) for picture, sound and Ambilight. 1 - Press , select All Settings and press OK. 2 - Select General Settings and press (right) to enter the menu. 3 - Select Factory Settings and press OK. 4 - Press (left) repeatedly if necessary, to close the menu. 1 - Press , select All Settings and press OK.
you can select another audio language which is available. language you want temporarily. To set the primary and secondary audio language… Subtitles from Text 1 - Press , select All Settings and press OK. 2 - Selec General Settings and press (right) to enter the menu. 3 - Select Languages > Primary Audio or Secondary Audio and press OK. 4 - Select on the language you need. 5 - Press (left) repeatedly if necessary, to close the menu.
You can select a word and scan Text for all occurences of this word. Text Setup Text language 1 - Open a Text page and press OK. 2 - Select a word or number with the arrow keys. 3 - Press OK again to jump immediately to the next occurence of this word or number. 4 - Press OK again to jump to the subsequent occurence. 5 - To stop searching, press (up) until nothing is selected. Some digital TV broadcasters have several Text languages available. To set your primary and secondary Text language . . .
1 - Press , select All Settings and press OK. 2 - Select Universal Access and press (right) to enter the menu. 3 - Select Universal Access one step further. 4 - Select On and press OK. 5 - Press (left) repeatedly if necessary, to close the menu. Manual To set the TV clock manually… 1 - Press , select All Settings and press OK. 2 - Select General Settings and press (right) to enter the menu. 3 - Select Clock > Auto Clock Mode, and select Manual. 4 - Select Date and Time to adjust.
With Audio Description, a narrator's commentary is added to the normal audio. To switch on the commentary (if available)… Speech The audio commentary can also hold subtitles for the words which are spoken. To switch on Audio Description… To switch on these subtitles (if available) . . . 1 - Press , select All Settings and press OK. 2 - Select Universal Access and press (right) to enter the menu. 3 - Select Audio Description and press (right) to enter the menu.
press OK. 4 - Select On and press OK. 5 - Press (left) repeatedly if necessary, to close the menu. 15.9 Android Settings Access Android Settings menu to view or adjust the settings for using Android Apps. 1 - Press , select All Settings and press OK. 2 - Select General Settings and press (right) to enter the menu. 3 - Select Android Settings, and press OK. 4 - Press BACK if necessary, to close the menu.
16 Reinstall Channels Channel Installation Reinstall Channels 16.1 You can reinstall all channels and leave all other TV settings untouched. Antenna/Cable Installation If a child lock code is set, you will need to enter this code before you can reinstall channels. Update Channels To reinstall channels… Automatic Channel Update 1 - Press , select All Settings and press OK. 2 - Select Antenna/Cable Installation > Search for Channels and select Start. 3 - Select Reinstall Channels, then press OK.
• Both TVs are from the same year range. • Both TVs have the same hardware type. Check the hardware type on the TV type plate on the back of the TV. Typically noted as Q . . . LA • Both TVs have compatible software versions. To Installed TVs Depending on whether your TV is already installed or not, you must use a different method to upload a channel list. Current software version To an already installed TV 1 - Verify the country setting of the TV. (To verify this setting, press .
DVB Settings Free / Scrambled Network Frequency Mode If you have a subscription and a CAM - Conditional Access Module for pay TV services, select Free + Scrambled. If you did not subscribe to pay TV channels or services, you can select Free Channels Only . If you intend to use the fast Quick Scan method in Frequency Scan to search for channels, select Automatic. The TV will use 1 of the predefined network frequencies (or HC - homing channel) as used by most cable operator in your country.
you are now. If you don't want to change the setup, select Search. Go to step 5. 3b - The TV has 2 built-in satellite tuners. According to how many satellite dish cables you have connected –1 or 2, select One Tuner or Two Tuners. If you use a Single Cable system (Unicable or MDU), always select Two Tuners. 5 - In Installation System, select the number of satellites you want to install or select one of the Unicable systems.
installation. All installed channels are put in the channels list All. be in Standby to automatically update channels. You can switch off Automatic Channel Update. To switch off the automatic update… 1 - Press , select All Settings and press OK. 2 - Select Satellite Installation > Automatic Channel Update and select Off. 3 - Press (left) repeatedly if necessary, to close the menu.
To add a satellite… 5 - If a transponder is found, select Store to store the new transponder on the selected LNB. 6 - Select Exit to leave the manual installation. 1 - Press , select All Settings and press OK. 2 - Select Satellite Installation > Search for satellite and select Add Satellite. The current satellites are shown. 3 - Select Search. The TV will search for new satellites. 4 - If the TV has found one or more satellites, select Install. The TV installs the channels of the found satellites.
I cannot remove a satellite • Subscription packages do not allow removing a satellite. To remove the satellite, you have to do a complete installation again and select another package. Sometimes the reception is poor • Check if the satellite dish is solidly mounted. Strong winds can move the dish. • Snow and rain can degrade the reception.
17 Update from Internet Software If the TV is connected to the Internet, you may receive a message to update the TV software. You need a high-speed (broadband) Internet connection. If you receive this message, we recommend you to carry out the update. 17.1 Update Software Update from USB With the message on screen, select Update and follow the instructions on screen. It might be necessary to update the TV software.
following exception applies : "NOTE! This copyright does *not* cover user programs that use kernel services by normal system calls - this is merely considered normal use of the kernel, and does *not* fall under the heading of "derived work". Also note that the GPL below is copyrighted by the Free Software Foundation, but the instance of code that it refers to (the linux kernel) is copyrighted by me and others who actually wrote it.
License C programming language, implements the basic cryptographic functions and provides various utility functions. The original download site for this software is : http://openssl.org/OpenSSL license libjpeg (8a) This package contains C software to implement JPEG image encoding, decoding, and transcoding. This software is based in part on the work of the Independent JPEG Group.
for this software is : http://code.google.com/p/protobufCopyright 2008, Google Inc.All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of Google Inc. nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
of the Terms of Use to be unenforceable, the remainder of the Terms of Use will continue in full force and effect.14. The Terms of Use constitute the entire agreement between the parties with respect to the subject matter hereof and supersedes and replaces all prior or contemporaneous understandings or agreements, written or oral, regarding such subject matter.15.
stores. Different kernel modules and programs are currently used for different protocols; iptables applies to IPv4The original download site for this software is : https://android.googlesource.comThis piece of software is made available under the terms and conditions of the GPL v2. made available under the terms and conditions of the GPL v2 license, which can be found below. tinyxml (2.4.0) This TV uses FLAC in libddlacodec.so.
Fusion provides an implementation of abstractions needed for multi-threaded/multi-process programming: .The original download site for this software is : http://www.directfb.org/This piece of software is made available under the terms and conditions of the LGPL v2.1 license, which can be found below. Open Source Project nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
terms and conditions of Android Apache License version 2. site for this software is : http://libmtp.sourceforge.net/This piece of software is made available under the terms and conditions of Apache License version 2.0. Unicode (4.8.1.1) This TV uses Unicode which specifies the representation of text MDNS Responder (NA) MDNS Responder. The mDNSResponder project is a component of Bonjour,Apple's ease-of-use IP networking initiative. The original download site for this software is : http://www.opensource.
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANYTHEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USEOF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Project nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY The Android Open Source Project ``AS IS'' ANDANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THEIMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSEARE DISCLAIMED.
kill different types of RF radios When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License. object code or executable form with such an offer, in accord with Subsection b above.) The source code for a work means the preferred form of the work for making modifications to it.
GNU LESSER GENERAL PUBLIC LICENSE We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives you legal permission to copy, distribute and/or modify the library. Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. To protect each distributor, we want to make it very clear that there is no warranty for the free library.
whole GNU operating system, as well as its variant, the GNU/Linux operating system. ?d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as an argument passed when the facility is invoked, then you must make a good faith effort to ensure that, in the event an application does not supply such function or table, the facility still operates, and performs whatever part of its purpose remains meaningful.
executable is therefore covered by this License. Section 6 states terms for distribution of such executables. charge no more than the cost of performing this distribution. ?d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place.
License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Library does not specify a license version number, you may choose any version ever published by the Free Software Foundation. The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
are under common of this License, Derivative Works shall not include works that remain control with that entity. For the purposes of this definition, separable from, or merely link (or bind by name) to the interfaces of, "control" means (i) the power, direct or indirect, to cause the the Work and Derivative Works thereof.
and distribute the prominent notices Work and such Derivative Works in Source or Object form. stating that You changed the files; and (c) You must retain, in the Source form of any Derivative Works 3. Grant of Patent License.
terms and conditions risks associated with Your exercise of permissions under this License. for use, reproduction, or distribution of Your modifications, or for any such Derivative Works as a whole, provided Your use, 8. Limitation of Liability. In no event and under no legal theory, reproduction, and distribution of the Work otherwise complies with whether in tort (including negligence), contract, or otherwise, the conditions stated in this License.
convenience. In case of APPENDIX: How to apply the Apache License to your work. any discrepancy between this copy and the notices in the file png.h that is included in the libpng distribution, the latter shall prevail. To apply the Apache License to your work, attach the following boilerplate notice, with the fields enclosed by brackets "[]" COPYRIGHT NOTICE, DISCLAIMER, and LICENSE: replaced with your own identifying information.
or needs. This library is provided with all faults, and the entire Guy Eric Schalnat Paul Schmidt risk of satisfactory quality, performance, accuracy, and effort is with Tim Wegner the user. The PNG Reference Library is supplied "AS IS". The Contributing Authors libpng versions 0.97, January 1998, through 1.0.6, March 20, 2000, are and Group 42, Inc.
Also, the PNG logo (in PNG format, of course) is supplied in the This license applies to all files found in such packages, and files "pngbar.png.jpg" and "pngbar.jpg (88x31) and "pngnow.png.jpg" (98x31). which do not fall under their own explicit license. The license affects thus the FreeType font engine, the test programs, Libpng is OSI Certified Open Source Software. OSI Certified Open Source is a documentation and makefiles, at the very least. certification mark of the Open Source Initiative.
encourage you to use the following text: If you are unsure whether or not a particular file is covered by this license, you must contact us to verify this. """ Portions of this software are copyright ? The FreeType The FreeType Project is copyright (C) 1996-2000 by David Turner, Project (www.freetype.org). All rights reserved. Robert Wilhelm, and Werner Lemberg. All rights reserved except as """ specified below.
of the unaltered, Therefore, by using, distributing, or modifying the FreeType original files must be preserved in all copies of source Project, you indicate that you understand and accept all the terms files. of this license. o Redistribution in binary form must provide a disclaimer that ----------- states that the software is based in part of the work of the There are two mailing lists related to FreeType: FreeType Team, in the distribution documentation. We also o freetype@nongnu.
See below for the actual license texts. Actually both licenses are BSD-style * * Open Source licenses. In case of any license issues related to OpenSSL * 5. Products derived from this software may not be called "OpenSSL" please contact openssl-core@openssl.org. * nor may "OpenSSL" appear in their names without prior written OpenSSL License * --------------- * permission of the OpenSSL Project. * 6.
*/ disclaimer. * 2. Redistributions in binary form must reproduce the above copyright Original SSLeay License * notice, this list of conditions and the following disclaimer in the ----------------------- * documentation and/or other materials provided with the distribution. /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) * All rights reserved. * 3.
code cannot simply be * copied and put under another distribution licence 1.6. "Initial Developer" means the individual or entity identified * [including the GNU Public Licence.] as the Initial Developer in the Source Code notice required by Exhibit */ A. 1.7. "Larger Work" means a work which combines Covered Code or _____________________________ MOZILLA PUBLIC portions thereof with code not governed by the terms of this License. LICENSE Version 1.1 1.8. "License" means this document.
claim(s), now owned or non-exclusive license, subject to third party intellectual property hereafter acquired, including without limitation, method, process, claims: and apparatus claims, in any patent Licensable by grantor. (a) under intellectual property rights (other than patent or trademark) Licensable by Initial Developer to use, reproduce, 1.11.
trademark) Licensable by Contributor, to use, reproduce, modify, absence of Modifications made by that Contributor. display, perform, sublicense and distribute the Modifications created by such Contributor (or portions thereof) either on an 3.1. Application of License.
Electronic Distribution Mechanism is maintained by a third party. (b) Contributor APIs. If Contributor's Modifications include an application programming 3.3. Description of Modifications. You must cause all Covered Code to which You contribute to contain a interface and Contributor has knowledge of patent licenses which file documenting the changes You made to create that Covered Code and are reasonably necessary to implement that API, Contributor must the date of any change.
absolutely clear than Initial Developer and every Contributor for any liability incurred by any such warranty, support, indemnity or liability obligation is the Initial Developer or such Contributor as a result of any such offered by You alone, and You hereby agree to indemnify the Initial terms You offer. Developer and every Contributor for any liability incurred by the 3.7. Larger Works.
and/or new versions of the License from time to time. Each version WITHOUT LIMITATION, WARRANTIES THAT THE COVERED CODE IS FREE OF will be given a distinguishing version number. DEFECTS, MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON-INFRINGING. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE COVERED CODE 6.2. Effect of New Versions. Once Covered Code has been published under a particular version of the IS WITH YOU.
terminate prospectively, unless if within 60 days after receipt of notice You either: (i) 8.4. In the event of termination under Sections 8.1 or 8.
C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4 (June 1995), out of its utilization of rights under this License and You agree to all U.S. Government End Users acquire Covered Code with only those work with Initial Developer and Contributors to distribute such rights set forth herein. responsibility on an equitable basis. Nothing herein is intended or shall be deemed to constitute any admission of liability. This License represents the complete agreement concerning subject matter hereof.
Alternatively, the contents of this file may be used under the terms of the _____ license (the "[___] License"), in which case the provisions of [______] License are applicable instead of those above. If you wish to allow use of your version of this file only under the terms of the [____] License and not to allow others to use your version of this file under the MPL, indicate your decision by deleting the provisions above and replace them with the notice and other provisions required by the [___] License.
When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC. 18 Specifications 18.1 Environmental Please inform yourself about the local separate collection system for electrical and electronic products. European Energy Label The European Energy Label informs you on the energy efficiency class of this product. The greener the energy efficiency class of this product is, the lower the energy it consumes.
• 800 x 600p - 60 Hz • 1024 x 768p - 60 Hz • 1280 x 768p - 60 Hz • 1360 x 765p - 60 Hz • 1360 x 768p - 60 Hz • 1280 x 1024p - 60 Hz • 1920 x 1080p - 60 Hz • 3840 x 2160p - 24 Hz, 25 Hz, 30 Hz, 50 Hz, 60 Hz 18.3 Operating System Android OS 5.0 Lollipop 18.4 Reception 18.
software. • Mobile devices – Philips TV Remote app - iOS, Android – Interoperability and performance may vary, depending on the capabilities of the mobile device and the software used. 18.8 Sound • 3D wOOx • HD Stereo • Output power (RMS) : 50W • Dolby® Digital Plus • DTS Premium Sound ™ ESD regulations This apparatus meets performance criteria B for ESD. In case the apparatus does not recover in file sharing mode due to electrostatic discharge, user interference is required. 18.
control and you notice the infra red LED flicker through the camera, the remote control is working. The TV needs to be checked. If you do not notice the flickering, the remote control might be broken or its batteries are low. This method of checking the remote control is not possible with remote controls which are wirelessly paired with the TV. 19 Help and Support 19.
Change to a different picture format. • When an HDMI-CEC audio device is connected this behaviour is normal. Photos, videos and music from a USB device do not Picture format keeps changing with different channels show • Make sure that the USB storage device is set to Mass Storage Class compliant, as described in the storage device's documentation. • Make sure that the USB storage device is compatible with the TV. • Make sure that the audio and picture file formats are supported by the TV.
your question directly or send a question by email. You can download new TV software or the manual to read on your computer. 19.5 Repair For support and repair, call the Consumer Care hotline in your country. Find the telephone number in the printed documentation that came with the TV. Or consult our website www.philips.com/support . TV model number and serial number You might be asked to provide the TV product model number and serial number.
20 Risk of Injury or Damage to the TV Safety and Care • Two people are required to lift and carry a TV that weighs more than 25 kg or 55 lbs. • If you mount the TV on a stand, only use the supplied stand. Secure the stand to the TV tightly. Place the TV on a flat, level surface that can support the weight of the TV and the stand. • When wall mounted, ensure that the wall mount can safely bear the weight of the TV set.
Lightning Storms Disconnect the TV from the power outlet and antenna before lightning storms. During lightning storms, never touch any part of the TV, power cord or antenna cable. Risk of Hearing Damage Avoid using earphones or headphones at high volumes or for prolonged periods of time. Low Temperatures If the TV is transported in temperatures below 5°C or 41°F, unpack the TV and wait until the TV temperature reaches room temperature before connecting the TV to the power outlet.
Directives 2006/95/EC (Low Voltage), 2004/108/EC (EMC) and 2011/65/EU (ROHS). 21 Terms of Use_TV Compliance with EMF TP Vision Europe B.V. manufactures and sells many products targeted at consumers which, like any electronic apparatus, in general have the ability to emit and receive electromagnetic signals.
22 Terms of Use_Smart TV You can see the terms of use, privacy policy, and also set privacy settings of your Smart TV. To open the terms of use of Smart TV page… 1 - Press HOME to open the Home menu. 2 - Select Apps to open Apps. 3 - Select Support.
23 23.4 Copyrights DTS Premium Sound ™ 23.1 Ultra HD The DIGITALEUROPE UHD Display Logo is a trademark of DIGITALEUROPE. DTS Premium Sound ™ For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS 2.0 Channel is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved. 23.2 23.
Content owners may require you to upgrade PlayReady to access their content. If you decline an upgrade, you will not be able to access content that requires the upgrade. 23.7 Wi-Fi Alliance Wi-Fi®, the Wi-Fi CERTIFIED logo, the Wi-Fi logo are registered trademarks of the Wi-Fi Alliance. 23.8 Kensington (If applicable) Kensington and Micro Saver are registered US trademarks of ACCO World Corporation with issued registrations and pending applications in other countries throughout the world. 23.
Index 3 3D Backlight Contrast 47 3D, Health Warning 44 3D, Optimal Viewing 43 A Age Rating 30 Antenna connection 7 Antenna connection, Tips 11 Apps 40 Audio Out - Optical, tips 13 Audio Out Delay 16 Audio Out Format 16 Audio Out Levelling 16 Audio Out Offset 16 Audio Out Settings 16 Audio to Video Sync 16 Auto Surround 3D 51 Auto Volume Levelling 51 Automatic switch off 23 B Backlight Contrast 46 Bass 51 Blu-ray Disc player, connect 17 Brightness, Philips Logo 22 C CAM, Conditional Access Module 13 Camco
Network, Switch on Wi-Fi 10 Network, TV Network Name 10 Network, View Settings 9 Network, Wi-Fi Smart Screen 10 Network, Wired 9 Network, Wireless 8 Network, WoWLAN 9 Network, WPS 8 Noise Reduction 49 Now on TV 37 Surround Mode 51 Switch Off Timer 23 Switching On 22 Synchronise Audio and Video 16 T On and Off 22 Options on a Channel 31 Teletext 34 Text 34 Treble 51 TV Guide 33 TV Guide, data and information 33 TV network name 9 TV on Demand 37 TV placement 6 P U Pairing the Remote Control 26 Parental
Powered by TCPDF (www.tcpdf.