operation manual
• 18 •
clean, by removing and washing it with drinking
water after each use (Fig. 17).
5.2 Using Coffee Pods
• (Fig.9-A)
• (Fig.10) - Insert the coffee pod adapter (13) - with the
• (Fig.11)
bottom (7).
• (Fig.12)
in place.
• Release the grip from the Portafilter. The handle
automatically turns slightly towards the left.
This movement assures the perfect operation of the
• (Fig.14)
coffee button (15) again to stop hot water dispensing.
• (Fig.16)
turning it from right to left and emptying out the remaining
water.
• (Fig.11)
bottom (7).
• (Fig.12)
in place.
• Take 1 preheated cup
check that it is correctly placed under the coffee
dispensing holes.
• (Fig. 14) - Press the brew button (15).
• When the desired quantity of coffee has been reached,
press the coffee button (15) again to stop coffee brewing
and remove the cup of coffee.
• (Fig.16) - Wait a few seconds after brewing, then remove
clean by removing it and washing with drinking
water after each use (Fig. 17).
6 TIPS FOR CHOOSING COFFEE
As a general rule any type of coffee available on the
market can be used. However, coffee is a natural product
Therefore it is a good idea to try different types, in order
For best results, we recommend using blends which are
made especially for espresso coffee machines. Coffee
"dripping" effect.
using a different coffee grind.
BEFORE USING THE HOT WATER/STEAM
FUNCTION, MAKE SURE THAT THE STEAM
SPOUT (PANNARELLO) IS POSITIONED OVER THE
DRIP TRAY.
7 HOT WATER
Danger of scalding! At the beginning, short
spurts of hot water may come out. The brewing
spout can reach high temperatures: do not touch it with
bare hands.
• (Fig.7) - Press the ON/OFF button (17).
• Wait until the brew button light (15) turns on. The machine
is now ready.
and off; this is to be considered as standard operation
and not a fault.
• (Fig.8) - Place a container or a glass under the steam
spout (Pannarello). Open the knob (3) by turning it
counter-clockwise and press the button (15).
• When the desired quantity of hot water has been
dispensed, press the button (15) and close the knob (3)
by turning it clockwise.
• Remove the container with hot water.
8 STEAM / CAPPUCCINO
Danger of scalding! At the beginning, short
spurts of hot water may come out. The brewing
spout can reach high temperatures: do not touch it with
bare hands.
• (Fig.7) - Press the ON/OFF button (17).
• Wait until the brew button (15) turns on.
• (Fig.19) - Press the steam button (16). The brew button
light goes off (15).
• Wait until the steam button light (16) turns on. The machine
is now ready for steam dispensing.
on and off. This is to be considered as standard operation
and not a fault.
• (Fig.18) - Insert a container below the steam spout and
open the knob (3) for a few seconds, so that residual water
is a steady jet of steam.
• Close the knob (3) and remove the container.
• Fill a container 1/3 with cold milk.
Use cold milk to get a better froth.
• (Fig.20) - Immerse the steam spout in the milk and open
the knob (3) by turning it counter-clockwise. Turn the