User manual

Settings 19
mailbox) and * (dial international call).
Depending on your service provider, other hotkeys
may be predefined and locked.
1. In the list, select a key from 2 to 9 and
press OK. If the key was already programmed,
select Change.
2. Browse the list to select the function you wish to
associate with this key and press
, or
L Select. If you select Flash dial, you will be
asked to select a contact in the contacts list.
3. To use a hotkey, press and hold the programmed
key when in idle mode.
Voice command
Allows you to set up a direct access to a specific
function by linking it to a voice tag.
You can associate a voice command to most functions
supported by the hotkeys.
1. Select <New> , then browse the list to select a
function and press
, or L Select.
2. When Press OK and speak appears, record your
voice tag. Make sure you are in a quiet
environment, choose a short and simple word
and clearly pronounce it.
3. The next menu gives you access to Delete, Play,
Change function and Change voice options.
Press
R Back to create another voice tag.
To use the voice command, press and hold
, when
in idle mode, then say the recorded voice tag.
To reprogram a voice command: select it, press
L OK and select Change function. This will bring
you to the list of available functions.
Voice dial
Allows you to set a voice tag that will dial the default
number for the corresponding contact simply by
saying the voice tag. To set up voice dial, proceed as
follows:
1. Select <New>, then a contact in the list, then
press
, or L Options.
When the phonebook in phone is selected, choose the
number of your choice in the list that is displayed.
2. When Add voice tag? appears, follow the
instructions displayed on the screen.
To use the voice dial, press and hold
, when in
idle mode, then say the voice tag corresponding to the
number you want to dial.
Up to 15 voice tags can be defined and shared between
voice dial and voice command. Recorded voice tags are