User manual

Messages 33
If not included in your phone subscription, you must
subscribe to an e-mail account and have received the
settings information from your provider. In this case,
all parameters are communicated to you by your
provider and/or operator as described below and must
be entered as given. In some cases, your operator might
also be your e-mail service provider.
This menu allows you to send and
receive e-mails, with or without
attachments. If your
phone was pre-
configured, the parameters are already
set and you don’t have to change them, except for
Login , Password and E-mail address which are up to you
when creating an e-mail account.
To enter specific signs such as @ or %, see page 11.
Settings
Select E-mail > E-mail 1 > Settings and press , or
L Select to access the following options:
E-Mail
Account
name
To rename E-mail 1 or E-mail 2 boxes.
An e-mail account might be predefined
and locked, preventing renaming.
E-mail
E-mail
server
To configure the settings needed to
connect to the e-mail server of your
Internet Service Provider (ISP).
In some cases,
Login , Password and
E-mail address are up to you when you
subscribe to your account. Enter them
as defined. The
POP3 address is used to
receive e-mails, whereas the
SMTP
address
is used to send e-mails.
WARNING ! For an e-mail connection via GPRS, if your
phone operator is NOT your e-mail provider, contact them
to get the correct address of the SMTP server.
Advanced
If the fields of these menus are empty, or
if you encounter connection problems,
contact your ISP.
The
SMPT authenticat. menu should be
Off in most European countries: your
e-mails will NOT be sent if set to
On .
Contact your provider for complete
information.