User manual

Operator services 61
You can send DTMF tones (or “touch tones”) to
access some phone services at any time during a call by
pressing any of the keys
0 to 9 , * and # .
You can also attach a DTMF sequence to a phone
number before dialling it (or storing it in the
Contacts). The phone number and the DTMF part
must be separated by a wait character.
To obtain a pause or wait character, press and hold
# . The display shows w for wait and p for pause.
For example, to hear messages (e.g. code 3) on your
answering machine (password 8421) at phone
number 12345678, you could call:
12345678w8421p3.
Subscription dependent.
Making a second call
You can make a second call during an active call or a
call on hold. While being on the phone, dial a number
(or select a contact in the phonebook) and press
( .
The first call is put on hold (the number is displayed
on the bottom of the screen) and the second number
is dialled. You can then press
, or Options to access
the options among which are:
• Switch calls to toggle between calls (you can also
press
+ or - to switch calls).
• Tran sfe r to connect the two calls. You are dis-
connected when the transfer is completed.
• Conference to introduce the caller into a con-
ference call.
Refresh To reload the currently browsed
page from its original server.
Set as
homepage
To save the currently browsed
WAP page as the default
homepage.
Save as... To save images embedded in the
pages that are displayed in the
Picture album.
Exit To end a WAP session.
Bookmarks
Go to URL
Settings
Push inbox
See page 59 for description of these
options.
DTMF tones
Handling several calls