PhotoFrame 8FF3CDW 8FF3CME 10FF3CDW 10FF3CME 10FF3CMI Quick start guide 1 2 3 Connect Setup Enjoy EN
What’s in the box Stand Photoframe AC-DC Mains adaptor PhotoFrame 8FF3CDW 8FF3CME 10FF3CDW 10FF3CME 10FF3CMI Quick start guide 1 2 3 Connect Install Enjoy Eng USB cable to PC Quick Start Guide Digital User Manual Philips PhotoFrame Manager software and user manual What you also need or AC AC Mains Memory card/USB PC
1 A Connect Install the stand B Connect the Mains b a Step 1 Insert the stand into the PhotoFrame. Note for product Step 1 Connect the Mains plug to the PhotoFrame. Step 2 Connect the Mains cord to a power supply socket. Step 2 Turn the stand clockwise 45 degrees to attach it to the PhotoFrame. C Insert a storage device Insert a memory card or a USB flash drive.
2 Setup A Turn on the PhotoFrame Press and hold for more than 1 second. The PhotoFrame starts to display all the valid images in slideshow mode. C Select on-screen language Step 1 In the main menu, select [Setup] > [Options] > [Language], then press OK to confirm. Step 2 Select [Language Setting] and press OK to confirm. Step 3 Select a language and press OK to confirm. B Access the main menu In slideshow mode, press main menu.
3 Enjoy A Select display mode B Display collage photos In slideshow mode, press to toggle between Slideshow mode, Browse mode and Calendar mode. Step 1 In the main menu, select [Slideshow] > [Collage] > [Multi], then press OK to confirm. Step 2 Select a format and press OK to confirm. Step 3 Press 1 (RIGHT) to select [Photo 1]. Step 4 Press 1 (RIGHT) again to select a photo source, then press OK to confirm. Step 5 Select an album and press OK to confirm. Step 6 Select a photo and press OK to confirm.
3 Enjoy C Zoom and crop pictures Step 1 In the main menu, select [Photos] > [Source] > [PhotoFrame], then press OK to confirm. Step 2 Select an album and press OK to confirm. Step 3 Select a photo and press OK to confirm. Step 4 Press to access [Photo Menu]. Step 5 Select [Zoom and Crop] and press OK to confirm. Step 6 Press / repeatedly to zoom in/out the photo. • Press 3 / 4 / 1 / 2 to crop the photo. Step 7 Press OK to confirm. Step 8 Select [Yes] and press OK to confirm.
3 D Enjoy Set the display auto on/off by lighting ETip If the [On - Set current] brightness level is too close with the [Off - Set current] brightness level, the display Auto on/off function may not work. You can use the default brightness of ambient lighting condition and you can also set the brightness of ambient lighting condition. Step 1 In the main menu, select [Setup] > [Options] > [Smart power] > [Lighting], then press OK to confirm. Step 2 Select [Settings] and press OK to confirm.
3 Enjoy E Set display auto on/off by time F Set Radiant Color Step 1 In the main menu, select [Setup] > [Smart power], then press OK to confirm. Step 2 Select [Time] and press OK to confirm. Step 3 Select [Weekday] and press OK to confirm. To enable the Smart Sleep function at weekends, select [Weekend]. Step 4 Select [Auto on]/[Auto off] and press OK to confirm. To cancel [Auto on]/[Auto off], select [Set On/Off] > [Off]. Step 5 Press 3 / 4 / 1 / 2 and OK to set the time for auto-on function.
3 G H Enjoy Set an event reminder Step 1 In the main menu, select [Setup] > [Options]>[Event reminder] > [New reminder], then press OK to confirm. Step 2 Select an alphabet and press OK to confirm. Step 3 When the album name (up to 24 characters) is complete, select [Enter] and press OK to confirm. Step 4 Select the reminder and press OK to confirm. Step 5 Select [Time] and press OK to confirm. Step 6 Press 3 / 4 / 1 / 2 and OK to set up time, and press OK to confirm.
3 I Enjoy Set Auto Orientation function Step 1 In the main menu, select [Setup] > [Options]> [Auto Orientation], then press OK to confirm. Step 2 Select [Enable] and press OK to confirm.
Troubleshooting Problem Tip My Digital PhotoFrame does not go into Auto-off status after I set it. Ensure that you set current time, Auto off and Auto on correctly. My Digital PhotoFrame is ON but the system does not respond anymore! • Ensure that the PhotoFrame is properly powered. • Use a pin to trigger the RESET button located on the back to restore the PhotoFrame. My Digital PhotoFrame does not show some of my photos. • The PhotoFrame shows photos in JPEG format.
© Royal Philips Electronics N.V. 2008 All rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners.
