Philips Electronics
Table des matières Philips © 2006 2006. 8 Première Version V06.08.10 1. 2. Bienvenue dans Auto Run PC ......................................................................- 3 Nouveautés d'Auto Run PC ? ......................................................................- 3 - 3. 3.1. Mise en route ...............................................................................................- 4 Configuration requise ..................................................................................
1. Bienvenue dans Auto Run PC Le programme Philips Auto Run pour cadre photo est une application Windows permettant de gérer des photos entre un cadre photo Philips et un PC.Il offre une interface conviviale pour parcourir et d'obtenir un aperçu des photos à la fois dans les répertoires du PC et les albums du cadre photo.Il permet aussi des opérations telles que la copie, le déplacement et la suppression de photos.
3. Mise en route 3.1. Configuration requise OrdinateurMatériel :Processeur Pentium III 500MHz ou supérieur, 128Mo de RAM, 100Mo d'espace disponible sur le disque dur, adaptateur d'affichage couleur en 65536 couleurs. Systèmes d'exploitation PC pris en charge :Windows 2000, XP. Langues prises en charge :Chinois simplifié et traditionnel, anglais, français, allemand, italien, japonais et espagnol. 3.2.
Le programme Auto Run affichera automatiquement sa fenêtre principale lors de la connexion du cadre photo Philips au PC de l'utilisateur via le câble USB.Les utilisateurs peuvent aussi double cliquer sur le raccourci du bureau pour ouvrir cette application, comme indiqué ci-dessous. 2 1 3 Fig.
des photos dans les albums ou les dossiers du cadre photo et toute carte mémoire externe.L'affichage de miniatures indiquera Déconnecté lorsqu'il n'est pas connecté au PC. Les utilisateurs peuvent copier des photos entre le PC et le cadre photo en faisant glisser et déplacer entre Le volet de la zone du PCet Le volet de la zone du cadre photo.
Affichage de l'arborescence des dossiers : Affiche tous les dossiers et la corbeille en arborescence, similaire au gestionnaire de fichiers de Windows.Si les utilisateurs cliquent sur le dossier désiré, toutes ses photos seront affichées dans Affichage de miniatures de photos (2). Affichage de miniatures de photos : Affiche toutes les photos en miniatures dans le dossier sélectionné (1).
Le programme Auto Run permet d'effectuer un redimensionnement automatique pour toutes les photos copiées sur Photo Frame.Vous pouvez aussi rogner des photos de plus de 540x720 ou 720x540 pixels, dans la fenêtre Crop Photo en double cliquant sur les photos dans l'affichage de miniatures comme indiqué dans la Fig 5. 1 2 3 4 Fig.5 Aperçu de photo rognée Dans cette zone d'aperçu, Auto Run affichera les résultats des photos rognées.
Rogner une photo : Effectuer l'action de rognage, et enregistrer le fichier rogné dans le même dossier. Le fichier enregistré portera le même nom de fichier plus un numéro d'index. Par exemple, si le nom de fichier d'origine est orginal.jpg, le fichier enregistré sera crop(1).jpg [Notification] Si la taille de la Photo est inférieure à 540x720 ou 720x540 pixels, le message d'avertissement suivant s'affichera. Fig.
5. Volet de zone 3 1 2 4 Fig.7 Photo Frame : Lorsque le programme Auto Run se connecte en 9 , Photo Frame affiche tout format de carte mémoire en Photo Frame 9 . Vous pouvez cliquer sur les périphériques de stockage cibles, ex. Photo Frame, SD/MMC, CF Card, MS, et XD. Album : Quand vous sélectionnez un des périphériques de stockage, cette zone affichera tous les albums appartenant à ce périphérique. Une fois que vous avez choisi l'album, toutes les photos appartenant à cet album s'afficheront en (3).
en fonction de l'album de Photo Frame (1) sélectionné par l'utilisateur. Zone d'aperçu de la photo : Affiche l'image sélectionnée par l'utilisateur avec les informations détaillées, telles que le nom du fichier, la taille du fichier et la résolution photo. Barre de défilement Vous pouvez cliquer sur pour déplacer la Barre de défilement sur la gauche et agrandir le volet de la zone de Photo Frame.Vice versa, vous pouvez cliquer sur pour augmenter le volet de zone du PC.
6. Volet de touches de commande Fig.9 Corbeille : Vous pouvez cliquer sur le bouton de la Corbeille pour envoyer le dossier cible dans le dossier de la corbeille. Vous pouvez parcourir ces photos supprimées et les redéplacer dans les dossiers désirés. Outil de configuration Vous pouvez configurer les préférences d'exécution d'application et toutes les préférences de langue.
Fig.10 Langue : Vous pouvez sélectionner la langue désirée dans la liste de choix de langue. Cliquez sur OK pour confirmer la modification que vous venez de faire. [ATTENTION] Si votre ordinateur ne prend pas en charge la langue sélectionnée, le programme risque de ne pas afficher correctement les caractères. Pour résoudre ce problème, mettez à jour les packages de service de langue depuis le site web de Microsoft. Fig.
Copier : Vous devez d'abord sélectionner les photos, puis cliquez sur le bouton Copier pour copier les photos sélectionnées. Couper :Vous devez d'abord sélectionner les photos, puis cliquez sur le bouton Couper pour couper les photos sélectionnées. [ATTENTION] Les photos peuvent être coupées à partir d'une carte mémoire sur un PC, mais ne peuvent pas être coupées à partir du PC sur un périphérique de stockage. Fig.
Supprimer un album : Vous devez sélectionner les albums que vous voulez retirer, et cliquer sur le bouton Supprimer pour retirer ces albums. La fenêtre de confirmation suivante apparaîtra et vous demandera de reconfirmer. Tous les fichiers supprimés seront déplacés dans la Corbeille. Fig.14 Renommer l'album :Vous pouvez cliquer sur le bouton Renommer l'album pour faire apparaître la fenêtre d'entrée du clavier.
Fig.15 Nouvel album : Pour créer un nouvel album, vous pouvez d'abord sélectionner la carte mémoire cible, et cliquez sur le bouton Nouvel album pour faire apparaître la fenêtre du clavier pour entrer le nom de l'album. Fig.16 Fermer :Vous pouvez cliquer sur le bouton Fermer pour réduire cette application, qui s'affichera sous forme d'une icône de tiroir sur la barre des tâches.