Quick start guide

Display
Pluto Non DI_Dach_EN
90x127mm
The lter may produce smell after being used for a while because of the absorption of indoor
air. Remove the lter and place it where it has direct sunlight and ventilation for several
hours. Re-install and try using it again. If the odor remains, please replace the lter.
Control
Very poor
Mode switch/
Filter reset
Long press the for 3 seconds after
replacing the lter (AC0819/AC0820: FY0194,
AC0830: FY0293).
Clean the surface of the lter
every 4 weeks.
Clean the surface of the lter
Power on/o
Maintenance
Good PoorFair
Air quality light
Filter replacement alert
Air quality
Auto Turbo Sleep
Replace lter when display shows
3000 055 05361-1

Summary of content (5 pages)