User Guide

9EN
2 Touch to switch on the air purier.
» The air purier beeps.
» The “ ” displays on the screen during warming
up. Then the air purier shows the PM2.5/IAI level
after measuring the air quality.
» The air purier operates in the auto mode with IAI
displayed on the screen.
3 Touch and hold the button for 3 seconds to switch o
the air purier.
Note: If the air purier stays connected to the electrical outlet after turning OFF,
the air purier will operate under the previous settings when turned ON again.
Changing the mode setting
You can choose Auto mode, Speed 1, Speed 2, Turbo mode or Sleep mode by
touching the button.
Automode( ):The air purier
automatically adjusts the fan speed in
accordance with the ambient air quality.
Manualspeed( & ): In manual
mode, the air purier operates on
speed 1 or speed 2.
Turbomode( ):The air purier
operates on the highest speed.
Sleepmode( ):The air purier
operates quietly at a low speed. After
3seconds, the screen lights o.