User Manual

15EN
2 Put the power plug in the power socket.
3 Within 15 seconds after power on, touch and hold and button for
3seconds to reset the lter lifetime counter.
6 Storage
1 Turn o the air purier and unplug from the power socket.
2 Clean the air purier, particle sensor and the surface of the lter (see chapter
“Cleaning and maintenance”).
3 Let all parts air dry thoroughly before storing.
4 Wrap the lter in air tight plastic bags.
5 Store the air purier, lter in a cool, dry location.
6 Always thoroughly wash hands after handling the lter.
7 Troubleshooting
This chapter summarizes the most common problems you could encounter with
the appliance. If you are unable to solve the problem with the information below,
contact the Consumer Care Center in your country.
Problem Possible solution
The appliance does
not work properly.
•
The lter replacement alert has been on continuously
but you have not replaced the corresponding lter. As a
result, the appliance is now locked. In this case, replace the
lter and long touch and to reset the lter lifetime
counter.
The airow that
comes out of
the air outlet
is signicantly
weaker than
before.
•
The surface of the lter is dirty. Clean the surface of the
lter (see the chapter “Cleaning and maintenance”).