Quick start guide

Sleep
mode
Allergen index from 1 to 12
where 1 indicates best air quality
3-digit display
PM2.5 / IAI
PM2.5
indicator
WiFi
indicator
Gas
indicator
Allergen index
indicator
MicroCube DI CEE_EN
90x127mm
When display shows F0
When display shows A3 When display shows C7
Maintenance
Time to clean the pre-lters
Time to replace NanoProtect lter
Series 3
Time to replace NanoProtect lter
Active Carbon
Turbo
speed
Filter replace
alert
Speed 3Speed 2Speed 1
Pre-lter clean
alert
Allergen
mode
Bacteria &
Virus mode
NanoProtect lter
Series 3 x 2
NanoProtect lter
Active Carbon x 2
Pre-lter x 2
2
2
1
1
3 4
3 4
press for 3 seconds to reset after cleaning or replacing accessory
!
Good Poor Very poorFair
Connectivity
Fan
speed
Power Auto
mode
Filter
reset
Child
lock
Light
dim
Control
Hold for
3 seconds
Hold for 3 seconds:
Display switch between
PM2.5 / IAI /GAS
Sleep
Speed 1~3
Turbo
Display
Air quality
ring
4241 210 98435-1
The lter may produce smell after being used for a while because of the
absorption of indoor air. Remove the lter and place it where it has direct sunlight
and ventilation for several hours. Re-install and try using it again. If the odor
remains, please replace the lter.
Pollution
mode
Clean Home+
Open the app and click on "Connect a New Device"
or press the "+" button to connect your device.
Please follow the steps in the app.
You can use the app to control the purier and check
air quality. Download and install the Philips app
1
2