Operation Manual

8 EN
Turning on and o
Note
• Always place the air purier on a
stable, horizontal, and level surface
with the front of the unit facing away
from walls or furniture.
• For optimum purication performance,
close doors and windows.
• Keep curtains away from the air inlet or
air outlet.
1 Put the plug of the air purier in the
power socket.
2 Touch to switch on the air purier
(g.j).
» The air purier beeps.
» The air purier operates under
the allergen mode by default.
» When the air purier is warming
up, " " displays on the
screen. After measuring the
particulate matter only in the
air, the air purier shows the IAI
level and operates in the auto
mode with displayed on the
screen (g.k).
» After 30 seconds, the air
purier shows the IAI level
on the screen. The air quality
sensor automatically selects
the appropriate air quality light
color.
3 Touch and hold for 3 seconds to
switch o the air purier.
Note
• If the air purier stays connected to
the electrical outlet after turning OFF,
the air purier will operate under the
previous settings when turned ON
again.
Changing the Auto mode
setting
You can choose the Allergen mode
( ), the General mode ( ) or the
Bacteria & Virus mode ( ).
Allergen mode
The extra-sensitive Allergen mode
is designed to react to even a small
change in allergen levels in the
surrounding air.
• Touch the Auto mode button to
select the Allergen mode (g.l).
» Auto ( ) and display on the
screen.
General mode
A smart auto-setting that automatically
adjusts the air purier’s settings to the
ideal level.
• Touch the Auto mode button to
select the General mode (g.m).
» Auto ( ) and display on the
screen.
Bacteria & Virus mode
The Bacteria & Virus mode boosts the
airow to quickly reduce bacteria &
viruses.
• Touch the Auto mode button to
select the Bacteria & Virus mode
(g.n).
» Auto ( ) and display on the
screen.