Register your product and get support at www.philips.
Contents 1 Important 3 2 Your Docking Speaker 3 3 Get started 5 4 Play 5 5 Product information 7 6 Troubleshooting 8 7 Notice 9 Introduction What's in the box Overview of the main unit Connect power Play from iPod/iPhone Play from Bluetooth device Play from an external audio device Adjust volume Mute sound Specifications About Bluetooth device Recycling 3 3 4 5 5 6 6 7 7 7 8 9 EN 2
1 Important • • • • • • • • • • • • • Read these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Overview of the main unit d a c b e a f • Mute or unmute sound. b Dock for the iPod/iPhone c d • • Enable or disable Bluetooth function. / Adjust volume. e MP3-LINK • Connect an external audio device. f DC IN • Connect power.
3 Get started Always follow the instructions in this chapter in sequence. Connect power Caution •• Risk of product damage! Make sure that the power supply voltage matches the voltage printed on the bottom of the unit. •• Risk of electric shock! When you unplug the AC adaptor, always pull the plug from the socket. Never pull the cord. Connect the power adaptor to: • the DC IN socket at the back of the docking speaker. • the wall outlet.
To remove the iPod/iPhone: Pull the iPod/iPhone out of the dock. Charge the iPod/iPhone 3 4 When the docking speaker is connected to power, the docked iPod/iPhone begins to charge automatically. Play from Bluetooth device 5 Pair with Bluetooth device Note 1 2 Press to select Bluetooth source. »» The Bluetooth button blinks. Turn on Bluetooth function on your device. • Different devices may have different way to activate Bluetooth.
Adjust volume During play, press / to adjust volume. Mute sound During play, press 5 Product information Note to mute or unmute sound. •• Product information is subject to change without prior notice. Specifications Amplifier Total Output Power Signal to Noise Ratio MP3 Link 4 W per channel x 2 > 62 dBA 650 mV RMS Bluetooth Standard Output power Frequency band Range Bluetooth Standard Version 2.1+EDR 0 dBm (Class 2) 2.402 ~ 2.
6 Troubleshooting Warning •• Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www.philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available.
7 Notice Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone respectively, and has been certified by the developer to meet Apple performance standards.
Specifications are subject to change without notice © 2012 Koninklijke Philips Electronics N.V. All rights reserved. AD530_12_UM_V1.
