Installation Instructions Eng Philips Communication, Security & Imaging
IMPORTANT SAFEGUARDS 1. Read Instructions - All safety and operating instructions should be read before the unit is operated. 2. Retain Instructions - The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the unit and in the operating instructions should be adhered to. 4. Follow Instructions - All operating and use instructions should be followed. 5. Cleaning - Unplug the unit from the outlet before cleaning.
SAFETY PRECAUTIONS SECURITE CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT OPEN COVERS. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
SICHERHEITSHINWEISE SEGURIDAD VORSICHT PRECAUCIÓN ELEKTRISCHE SPANNUNG. NICHT ÖFFNEN! RIESGO DE DESCARGA ELÉCTRICA ¡NO ABRIR! VORSICHT: DAS GEHÄUSE ZUR VERMEIDUNG VON ELEKTRISCHEN SCHLÄGEN NICHT ÖFFNEN. DAS GERÄT ENTHÄLT KEINE VOM BENUTZER ZU WARTENDEN TEILE. REPARATUREN NUR VON FACHPERSONAL AUSFÜHREN LASSEN.
VEILIGHEIDSMAATREGELEN SICUREZZA VOORZICHTIG ATTENZIONE GEVAAR VOOR ELEKTRISCHE SCHOK. NIET OPENEN! PERICOLO DI SCOSSA ELETTRICA. NON APRIRE. VOORZICHTIG: MAAK HET APPARAAT NIET OPEN OM DE KANS OP ELEKTRISCHE SCHOKKEN TE VERMIJDEN. BEVAT GEEN ONDERDELEN DIE DOOR DE GEBRUIKER MOETEN WORDEN ONDERHOUDEN. LAAT ONDERHOUD EN REPARATIES UITVOEREN DOOR BEVOEGDE TECHNICI.
MEDIDAS DE SEGURANÇA ZASADY BESPIECZE ŃSTAWA CUIDADO UWAGA NIEBEZPIECZEŃSTWO PORAŻENIA PRĄDEM ELEKTRYCZNYM. NIE OTWIERAĆ! RISCO DE CHOQUE ELÉCTRICO. NÃO ABRIR! UWAGA: ZE WZGLĘDU NA NIEBEZPIECZEŃSTWO PORAŻENIA PRĄDEM NIE WOLNO OTWIERAĀ POKRYWY.W ŚRODKU NIE MA ŻADNYCH ELEMENTÓW, KTÓRE MOGĄ BYĀ NAPRAWIANE PRZEZ UŻYTKOWNIKA. NAPRAWĘ NALEŻY POWIERZYĀ AUTORYZOWANEMU PUNKTOWI SERWISOWEMU. CUIDADO: PARA REDUZIR O RISCO DE CHOQUE ELÉCTRICO, NÃO ABRA AS TAMPAS.
TABLE OF CONTENTS 1 PRODUCT DESCRIPTION ..............................................................................................................................8 1.1 Models ................................................................................................................................................................8 1.2 Features...............................................................................................................................................................
1 PRODUCT DESCRIPTION ADIM™ is a powerful security and surveillance solution that combines the power and features of the Philips Allegiant matrix switcher with the speed and quality of digital video recording. This tightly integrated solution uses the IntuiKey keyboard to control all cameras, monitors and digital video recorders. With the push of a button, the DVR will playback video from the current camera and display it on the specified CCTV monitor.
Typical System: Back-up Recorder Allegiant Video Loop-through Disk Array Monitor Outputs PHILIPS ALLEGIANT Video Matrix Review Monitor Recorder Video Inputs PHILIPS PHILIPS PHILIPS PHILIPS Network Switch LAN Network ADIM Maximum of 6 Keyboards Serial Hub IMPORTANT NOTES: • Disk Arrays are optional. (See specific DVR for Disk Array options.) • Additional Serial Hubs may be used for remote keyboards.
4 4.3 ADIM CONNECTIONS AND CONFIGURATION ADIM PC is pre-configured as follows: NOTE: The installer should be familiar with the Allegiant CCTV control system and Windows-based software, and have a general knowledge of networking. Serial Hub’s Physical Port PC COM Port 1 5 2 6 4.
NA 29 4 3 2 1 Input MO Monitor Outputs ALLEGIANT Video Matrix PHILIPS 10 11 12 13 Figure 4.2 Figure 4.2 Shows the relationship of the Backup and Review DVRs and Allegiant outputs to the DVR Configuration page of the ADIM. 4.8 • The PC is pre-configured with the following network parameters IP address: 10.10.0.10 4.6 Network Connections • Interconnect the Serial Hub(s). ADIM PC, DVRs and network switches. • Subnet mask: 255.255.255.0 • Default Gateway: 10.10.0.
5 ADIM CONFIGURATION 1. Select or create an Allegiant Server document. The ADIM software is pre-loaded. No software installation is required. Open the ADIM Application by double clicking the ADIM icon on your desktop. 5.1 Logging ON and User Levels • Log in with a user name and password. NOTE: ADIM will automatically open the last Allegiant document, therefore this screen may not be seen. • 2.
4. If it is a new document, or if the Allegiant system is not online, select <>: NOTE: The green Allegiant On-line (in the lower right corner) indicates ADIM is properly communicating with the Allegiant. It may take up to 20 seconds for communication to be established. 6. Go to the DVR Configuration page to enter the values for each DVR. (See Section 6; Operation.
Items from DVR Configuration page NOTE for Allegiant model LTC 8500: ITEM Explained Default • Hi-Q Number Identifies 1 to 800 Hi-Qs (Not changeable) Not applicable • IP address Hi-Q IP address 000.000.000.
6.
Figure 6.3a Figure 6.3b NOTES: • New Log files are created daily upon the occurrence of the first event after 12:00am. Otherwise, new entries are appended to the existing log file upon starting the application. • Log files are easily manipulated into MS Excel or MS Access files for reporting. Use the TAB-delimited option to import into other databases. Figure 6.4a 6.4 Allegiant Camera Title Transfer Dialog Camera titles configured for your Allegiant may be transferred to the DVRs.
7 ADIM KEYBOARD OPERATION 7.1 Product Menu SoftKey Display SoftKey Descriptor To ensure that the IntuiKey Keyboard is properly connected to the ADIM system, press the IntuiKey’s Product key. The ADIM On-Line softkey option (see Figure 7.1) will only be displayed if the IntuiKey Keyboard is properly connected and configured, and the ADIM application is running. Allegiant ADIM Keyboard Control Figure 7.
8 TROUBLESHOOTING Problem Explanation / Resolution Keyboards are not communicating with the ADIM Software • Ensure that a null modem serial cable is connected between the IntuiKey keyboards and the serial hub. • Ensure that the appropriate communications port is properly configured for the serial hub. • Ensure that the serial hub is connected to the network switch with a straight-through Ethernet cable.
APPENDIX A – EVENT LOGS Monitor Message Likely Source of Error Info Primary or Review Hi-Q Failure DVR Error! Primary or Review Hi-Q Disk Array Failure Backup Hi-Q Failure Event Log File Component Type Component ID Entry Type Log Message ADIM Software Primary or Review Hi-Q DVR #nnnn, IP Address: XXX.XXX.XXX.XXX Error DVR Failure DVR Error! Hi-Q Primary or Review Disk Array DVR #nnnn, IP Address: XXX.XXX.XXX.
APPENDIX A – EVENT LOGS (…continued) Log File Event Monitor Message Likely Source of Error Info Component Type Component ID Entry Type Log Message Allegiant On-Line ADIM Software Allegiant Allegiant Info Allegiant went On-Line Allegiant Off-Line ADIM Software Allegiant Allegiant Info Allegiant went Off-Line Hi-Q Hi-Q DVR #nnnn, IP Address: XXX.XXX.XXX.
APPENDIX A – EVENT LOGS (…continued) Event Monitor Message Likely Source of Error Info Recording Status Change 2 Hi-Q Recording Status Change 3 Hi-Q Recording Status Change 4 Hi-Q Log File Component Type Camera Component ID Logical Camera # Camera Logical Camera # Camera Logical Camera # Entry Type Log Message Info Recording status changed to Continuous for indicated Logical Camera on DVR #nnnn, IP Address: XXX.XXX.XXX.
APPENDIX B – TECHNICAL SPECS ADIM Components (included): ACCSH01: Industrial PC: Rack-mount industrial-grade Pentium® PC, 120 MB RAM (minimum), 8 GB hard drive (minimum), RocketPort Serial Hub 8-Port Operating Temperature: 0 to 40°C Voltage: 100 - 240 Volts AC, 50 - 60 Hertz Dimensions: 6" x 9" x 2.5" (152 mm x 229 mm x 63.5 mm) Weight: 2 lbs., 5 oz., (.
APPENDIX C – RECOMMENDED NETWORK SWITCHES Approved and tested network switches for use with ADIM. • 3Com SuperStack 4300 model APPENDIX D – LIST OF COMPATIBLE DVRS • Hi-Q Series (DVRRT4, DVRRT4EP) APPENDIX E – PRIMARY, BACKUP, AND REVIEW DVRS Primary: DVRs on the input of the Allegiant Backup: DVRs used on the output of the Allegiant. When ADIM determines a problem with a Primary DVR, the cameras designated for that Primary DVR are switched over to the Backup DVR for recording.
Windows® is a registered trademark of Microsoft Corporation. 3935 890 42712 02-39 © 2002 by Philips Electronics N.V. © 2002 by Philips Communication, Security & Imaging, Inc. All Rights Reserved. Philips® is a registered trademark of Philips Electronics N. A. Corp. Updated September 25, 2002. Data subject to change without notice. Refer to www.philipscsi.com for latest information.