Register your product and get support at www.philips.
1 2 3 4 5 6 7 Important 4 Your FM/DAB+ radio 5 Hearing Safety Introduction What’s in the box Overview of the main unit 4 5 5 6 Get started 7 Listen to radio 9 Prepare FM/DAB+ antenna Connect power Option 2: Battery power Turn on Adjust volume Listen through the headphone 7 7 8 8 8 8 Listen to DAB+ radio Listen to FM radio Use system menu in FM/DAB+ mode 9 10 11 Product information 12 Troubleshooting 13 Notice 14 Ampli
1 Important • • • • • • • • • • • • 4 Read these instructions. Heed all warnings. Follow all instructions. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the clock radio.
English 2 Your FM/DAB+ radio Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With this unit, you can enjoy both FM and Digital Audio Broadcasting (DAB+) radio.
Overview of the main unit a b h c d i e f k j l g n o m a b • • 1 - 5+ Numeric keypads: select a preset radio station. Headphone socket. c VOLUME • Adjust volume. d 6 • EN Turn the radio on/off. e PRESET • Store radio stations manually. f INFO • Display DAB+/RDS information. g Display panel • Show current information. h SELECT • Confirm selection.
j DAB/FM • Select DAB+/FM source. k MENU • Access DAB+/FM menu. l SCAN • Scan/store radio stations automatically. m USB connector for software update n Antenna • Improve FM/DAB+ radio reception. o DC IN • Connect power. 3 Get started English i TUNING • Tune to a radio station. • Adjust settings. Caution •• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.
Turn on Tip •• When the unit is powered by AC mains supply, the Press . »» The unit switches to the last selected source. display backlight is always on. Option 2: Battery power Caution •• Risk of explosion! Keep batteries away from heat, Adjust volume MIN MAX VOLUME sunshine or fire. Never discard batteries in fire. •• Do not mix batteries (old and new or carbon and alkaline, c.). •• Remove batteries if they are exhausted or if the unit is not used for a long time.
Store DAB+ radio stations automatically Listen to DAB+ radio Digital Audio Broadcasting (DAB+) is a way of broadcasting radio digitally through a network of transmitters. It provides you with more choice, better sound quality and more information. Tune to DAB+ radio stations Note Note •• New stations and services will be added in the DAB+ broadcast. To make new DAB+ stations and services available, perform full scan regularly. In DAB+ mode, press SCAN.
Show DAB+ information While listening to DAB+ radio, press INFO repeatedly to scroll through the following information (if available): »» Station name »» Dynamic Label Segment (DLS) Listen to FM radio Select FM mode 1 2 »» Signal strength »» Program type (PTY) »» Ensemble Name »» Channel and frequency »» Signal error rate »» Bit rate and audio status »» Date Press to turn on the radio. Press DAB/FM repeatedly to select FM mode.
to select the preset station 6 - 10, press and hold 5+, then press another keypad simultaneously (e.g. 5+ with 1 for 6). Use FM menu 1 2 3 4 In FM mode, press MENU to access FM menu. Rotate TUNING to scroll the menu options: • [Scan setting] • [Stereo setting] • [System] To select an option, press SELECT. Repeat steps 2-3 if sub-option is available under one option. Scan setting • [Strong stations only]: scan stations with strong signals only. • [All stations]: scan all the available radio stations.
Note •• If you select [Software upgrade] without downloading the latest software or connecting to PC via USB port, you need power off and turn on the radio again. •• If upgrade is interrupted by accident, you must power off the unit and reinstall the software, otherwise your radio cannot work normally. 5 Product information Note •• Product information is subject to change without prior Know the software version 1 2 3 notice. Enter the system setting menu.
AC/DC adapter (Input) 100-240V~, 50/60 Hz, 0.5A (Output) 5.98V Operation Power Consumption Standby Power Consumption 1.0A (Brand name) Philips (Model number) AS100-059AD100 2.7W <1W Dimensions - Main Unit (H x W x D) 137 x 210 x 79 mm Weight - With Packing - Main Unit 1.05 kg 0.86 kg Warning •• Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself.
7 Notice This product complies with the radio interference requirements of the European Community. Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. Recycling Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
© 2011 Koninklijke Philips Electronics N.V. All rights reserved. AE5430_CCR_12_V1.