Always there to help you Register your product and get support at www.philips.
1 Important Important safety information Notice 2 2 3 2 Your InRange device 4 4 4 4 3 Prepare 5 Introduction What’s in the box Your InRange device Prepare your iPhone 4S/iPhone 5 or New iPad Prepare the InRange device Set up Bluetooth connection 4 Use Locate your iPhone 4S/iPhone 5/New iPad or InRange device Alert you when your iPhone 4S/ iPhone 5/New iPad and InRange device are out of range Set safe range free of alerts English Contents 5 5 6 9 9 10 10 5 Product information 11 6 Troubleshoot
1 Important Important safety information The translation of this document is for reference only. In the event of any inconsistency between the English version and the translated version, the English version takes precedence. Caution •• RISK OF EXPLOSION IF THE BATTERY IS REPLACED About operating and storage temperatures • Operate in a place where temperature is always between 0 and 35ºC (32 to 95ºF) • Store in a place where temperature is always between -20 and 45ºC (-4 to 113ºF).
This product complies with the radio interference requirements of the European Community. This product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the EC declaration of Conformity is available in the Portable Document Format (PDF) version of the user manual at www. philips.com/support. Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed with normal household waste.
2 Your InRange device To fully benefit from the support that Philips offers, register your product at www.philips. com/welcome. Introduction This InRange device offers you a loss prevention solution that allows you to: • locate your iPhone 4S/iPhone 5/New iPad from the InRange device. • attach the InRange device to your valuables and locate them from your iPhone 4S/iPhone 5/New iPad. • alert you from the InRange device when your iPhone 4S/iPhone 5/New iPad is beyond the set range.
Prepare the InRange device English 3 Prepare For first-time use: To fully benefit from the support that Philips offers, register your product at www.philips. com/welcome. Prepare your iPhone 4S/ iPhone 5 or New iPad 1 • Remove the plastic tab from the battery compartment. »» The InRange device switches on automatically. »» The power indicator flashes red and green alternately, and the InRange device beeps. Enable Bluetooth on your iPhone 4S/ iPhone 5/New iPad.
Set up Bluetooth connection Note •• Before setup, make sure that you have enabled Bluetooth on your iPhone 4S/iPhone 5/New iPad, and the power indicator on the InRange device flashes red and green alternately. 1 Put the InRange device into the protective pouch, then use the supplied metal lock to secure the pouch. 2 Attach the InRange device to your valuables (objects), such as a key or bag. 3 Run Philips InRange on your iPhone 4S/ iPhone 5/New iPad. 4 Tap Get Started.
As instructed, make sure that you have switched on the InRange device, then tap Next. »» The iPhone 4S/iPhone 5/New iPad starts to scan and search for the available InRange device. »» After the InRange device is found, ‘Philips AEA1000’ appears on the app screen. English 6 8 After successful connection, tap the image/name of the object attached to the InRange device. • 7 If you cannot find a matching image/ name, tap Other, then follow the onscreen instructions to take a picture and name your object.
9 Select a safe distance for the object to be protected, then tap Done to finish setup.
To locate your valuables attached to the InRange device: English 4 Use Locate your iPhone 4S/iPhone 5/New iPad or InRange device You can locate your iPhone 4S/iPhone 5/New iPad or InRange device simply with one touch. To locate your iPhone 4S/iPhone 5/New iPad: 1 Press on the InRange device. »» Both the InRange device and your iPhone 4S/iPhone 5/New iPad beep. 2 Follow the beeps to find your iPhone 4S/ iPhone 5/New iPad.
Alert you when your iPhone 4S/iPhone 5/New iPad and InRange device are out of range 2 Tap Safe Range -> Add Safe Range. 3 Select a place on the map as your safe range, then tap Done to finish the setting. To prevent loss of your iPhone 4S/iPhone 5/ New iPad or your valuables attached to the InRange device, you can hear beeps when the InRange device and your iPhone 4S/iPhone 5/ New iPad are out of the set range.
Bluetooth version Battery Battery life Product dimension Weight English 5 Product information Bluetooth® smart CR2016 3 months 59.9x39.9x3.8mm 78.0x44.0x7.9mm (with pouch) 10.
6 Troubleshooting Warning •• Risk of electric shock. Never remove the casing of the device. To keep the warranty valid, never try to repair the device yourself. If you have problems using this device, check the following points before you request service. If you still have a problem, register your device and get support at www.philips.com/support. Failed to set up Bluetooth connection between my iPhone 4S/iPhone 5/New iPad and InRange device. • Tap Rescan on the app screen of Philips InRange to try again.
Specifications are subject to change without notice © 2013 Koninklijke Philips Electronics N.V. All rights reserved. AEA1000_00_UM_V3.