Always there to help you Register your product and get support at www.philips.
1 Important Important Safety Instructions Notice 2 2 2 2 Your WeCall speaker 5 5 5 6 3 Get started 7 7 7 7 4 Use the WeCall speaker 9 9 Introduction What’s in the box Product overview Charge the WeCall speaker Turn on the WeCall speaker Connect the WeCall speaker Use as a speaker phone Use together with the WeCall App (for iPhone) Use as a Bluetooth or PC speaker English Contents 9 11 5 Product information 12 6 Troubleshooting 13 EN 1
1 Important • Important Safety Instructions To prevent battery leakage which may result in bodily injury, property damage, or damage to the unit,the batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. • Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/ hazardouswaste/perchlorate. The translation of this document is for reference only.
FCC Section 15.105 statement: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Your product contains batteries, which cannot be disposed of with normal household waste. Please inform yourself about the local rules on separate collection of batteries. The correct disposal of batteries helps prevent potentially negative consequences on the environment and human health. Please visit www.recycle.philips.com for additional information on a recycling center in your area. Always bring your product to a professional to remove the built-in battery.
English 2 Your WeCall speaker To fully benefit from the support that Philips offers, register your product at www.philips. com/welcome. Introduction This Bluetooth conference speaker (WeCall speaker) allows you to: • connect to a Bluetooth enabled smartphone and make a mobile or VoIP call through the WeCall speaker directly. • connect to a PC/Mac through the supplied USB cable and make a VoIP call through the WeCall speaker directly.
Product overview a i h g b f c e d f USB/ / a • Adjust volume during a call or music play. b ON/OFF power switch • • Remove the existing pairing information. Turns red when the battery is running low, or when you charge the WeCall Speaker. e Micro USB socket • 6 EN For connection with the supplied USB cable. • Answer an incoming mobile call. • End an ongoing mobile call. h Source indicator d Charge indicator • Switch between the USB or Bluetooth audio sources.
Turn on the WeCall speaker • Slide the power switch to the ON position. »» In Bluetooth mode, the status indicator turns blue. »» In USB mode, the source indicator turns green. • To turn off the WeCall speaker, slide the power switch to the OFF position. Caution •• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence.
2 Enable Bluetooth on your Bluetoothenabled device. Option 2: Connect through USB 3 Select ‘Philips WeCall speaker‘ on your Bluetooth-enabled device and if necessary input ‘0000’ as the paring password. »» The source indicator starts to flash blue. »» After successful pairing and connection, the source indicator turns solid blue and the WeCall speaker beeps.
If the WeCall speaker has been connected to a PC/Mac through the USB cable: Use as a speaker phone If the WeCall speaker has been connected to a Bluetooth-enabled mobile phone or other devices such as a tablet or PC/Mac: 1 Make sure that you have selected the Bluetooth source on the WeCall speaker. 2 Make a mobile or VoIP call on your mobile phone, or a VoIP call (such as a SkypeTM call) on your tablet or PC/Mac. 3 Use the WeCall speaker as a speaker phone during the call.
2 Set up Bluetooth connection between the WeCall speaker and your iPhone (see ‘Option 1: Connect to a Bluetooth-enabled device’ on page 7). 3 Set events for conference calls in the calendar of your iPhone or Android phone. 4 Run Philips WeCall and import conference calls from your calendar. 10 EN 5 Confirm the telephone number and code. 6 Make a conference call.
•• During a call, you can use / on the WeCall speaker to adjust volume. •• During a call, you can press to mute the WeCall speaker so that the other party cannot hear you. •• During a call, you can press to end the call. •• After a call, you can press twice consecutively to redial the last number. Tip •• During audio play, you can use speaker to adjust volume. •• During audio play, you can press WeCall speaker.
5 Product information Amplifier Rated Output Power Frequency Response Signal to Noise Ratio 2W RMS 80Hz -16k Hz, ±3dB >75dB Bluetooth Bluetooth® version Frequency band Range V2.1 + EDR 2.402-2.480 GHz ISM Band 10m (free space) Speakers Speaker Impedance Speaker Driver Sensitivity 4ohm 1" speaker >84dB/1W/1m General Information DC Power Input Battery Dimensions - Main Unit (w x h x d) Weight - With Packing - Main Unit 12 EN Input: 5 VDC, 1 A Model No.
Warning •• Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www. philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available.
•• •• •• 14 Keep your WeCall speaker far enough from other cellular/ Wi-Fi/ Bluetooth devices to avoid interference. On the connected device, reset the Bluetooth connection with the WeCall speaker. For example, remove the bluetooth connection with the WeCall speaker and then, pair with the WeCall speaker again. If RF interference is strong in the room, the Bluetooth connection can be affected. Try to switch to the USB connection.
15 English
2015 © Gibson Innovations Limited. All rights reserved. This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. AECS7000_37_UM_V3.
