User manual

15EN
Reset
Reset network connection
Reset the network connection when:
• a device re-joins the Smart Home network after the batteries are replaced.
• there are connection problems with the Smart Home network.
Indicator Status of the device
ashing red Network connection lost
On the sensor, do the following:
1 Open the battery door.
2 Push to close the battery door. Release the door when the status indicator
ashes in amber.
3 With the Philips Smart Home app, add the device to the Bridge (see 'Join
your Smart Home network' on page 11).
On the Intelligent switch, do the following:
1 Press and hold the Setup button until the status indicator ashes in amber.