User manual
10 EN
6 Other features
Project time onto a surface
By projecting time onto a surface such as a wall,
this clock radio offers you a unique way to read
time in the dark.
1 Press PROJECTION to turn the projection
on.
» The projection lens lights up.
2 Rotate the ROTATE PROJECTION
knobtondasuitableprojectionsurface
(maximum 100-degree left or 100-degree
right).
PROJECTION
ON/OFF
SS
3 Scroll the wheel on the ROTATE
PROJECTION knob to adjust the
projected angle slightly (maximum
60-degree left or 60-degree right).
4 Press REVERSE PROJECTION to reverse
the projected time (if necessary).
5 Press PROJECTION again to turn the
projection off.
» The projection lens lights off.
Note
• In battery-powered mode, the projection only lights
up for 10 seconds after you press PROJECTION. You
cannot use the projection function when the battery
level is low.
• For a long-time projection, use AC power to operate.
• During time or alarm setting, the projection is turned
off to protect eyes.
• It is highly recommended to view the projected time in
low light environment.
REVERSE
PROJECTION