Always there to help you Register your product and get support at www.philips.
Contents 1 Important Safety 2 2 2 Notice 4 4 4 5 3 Your Alarm Clock 6 6 6 6 4 Get started 8 8 8 8 9 Compliance Care of the environment Copyright Introduction What's in the box Overview of the main unit Connect power Plug and set Select time zone Set clock 5 Main features 10 10 10 11 11 6 Other features 12 12 12 12 13 7 Product information Specifications 14 14 8 Troubleshooting 15 Set alarm timer Listen to relaxing music Enjoy mood light Adjust volume Set sleep timer Charge your devices S
1 Important Safety a Read these instructions. b Keep these instructions. c Heed all warnings. d Follow all instructions. e Do not use this apparatus near water. f Clean only with dry cloth. g Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. h Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
the disconnect device shall remain readily operable. Risk of swallowing batteries • • • • The product or remote control may contain a button cell battery, which is possible to be swallowed. Keep the battery out of reach of children at all times! If swallowed, the battery can cause serious injury or death. Severe internal burns can occur within two hours of ingestion. If you suspect that a battery has been swallowed or placed inside any part of the body, seek immediate medical attention.
2 Notice Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. Compliance Notice for the USA This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
specialized company. Please observe the local regulations regarding the disposal of packaging materials, and old equipment. Note •• The type plate is located on the bottom of the product. Copyright 2013 © Koninklijke Philips Electronics N.V. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V or their respective owners. Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly.
3 Your Alarm Clock • b ALARM • Turn alarm on/off. • Set the alarm clock. c LIGHT • Turn the mood light on/off. • Dim the brightness of the mood light. Introduction With this alarm clock, you can: • know the time; • set one alarm; • set time zone and daylight saving time; • wake up to buzzer or music stored in the alarm clock; and • enjoy mood light and music. d VOL • Adjust music volume. • Adjust settings. e Power cord f LIGHT•COLOR • Select a color of the mood light.
k USB Charging socket • Charge an external device through USB cable. l MUSIC • Activate or deactivate music. m SLEEP • Turn the sleep timer on/off. • Set sleep timer.
4 Get started Always follow the instructions in this chapter in sequence. Connect power Caution •• Risk of product damage! Make sure that the power voltage corresponds to the voltage printed on the back or underside of the alarm clock. •• Risk of electric shock! When you unplug the AC adapter, always pull the plug from the socket. Never pull the cord. Tip •• Remove the battery if the alarm clock will not be in use for a long period of time.
For USA and Canada: Atlantic Standard Time Eastern Standard Time Central Standard Time Mountain Standard Time Pacific Standard Time Yukon Standard Time Hawaiian Standard Time -4 -5 (Default) -6 -7 -8 -9 -10 Set clock In standby mode, you can set the clock manually. 1 2 3 4 5 6 7 Press and hold SET TIME for 2 seconds.. »» The hour digits blink. Rotate VOLUME +/- to set the hour. Press SET TIME to confirm. »» The minute digits blink. Rotate VOLUME +/- to set the minute. Press SET TIME to confirm.
5 Main features Set alarm timer Note •• Make sure that you have set the clock correctly. 1 2 3 4 5 In standby mode, press and hold ALARM for 2 seconds to activate alarm setting. »» The hour digits blink. Activate/deactivate the alarm timer Press ALARM repeatedly. »» The alarm icon appears if the alarm timer is on and disappears if it is off. Snooze alarm When alarm sounds, press SNOOZE. »» The alarm snoozes and repeats ringing nine minutes later. Rotate VOLUME +/- to adjust hour.
2 The 15 sounds are listed as follows: Sound sequence 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Press LIGHT repeatedly to set the brightness of the mood light: hi, low or off. To select a color of the mood light: Press LIGHT•COLOR repeatedly to select a color. Sound name Rain Thunderstorm Stream Ocean Night forest Wild fire Wind Wind chime Train Space Heartbeat White noise Sleep music 1 Sleep music 2 Sleep music 3 Adjust volume Rotate VOLUME +/- to adjust volume.
6 Other features Set sleep timer This alarm clock can switch to standby mode automatically after a preset period. Press SLEEP repeatedly to select the sleep timer period (in minutes). »» When the sleep timer is activated, appears. To deactivate the sleep timer, press SLEEP repeatedly until [OFF] (off) appears. 15 30 60 90 120 OFF 2 Connect the alarm clock to power. »» Once the device is recognized, the charging starts.
Adjust display brightness Press BRIGHTNESS repeatedly to select different brightness levels: high, mid, and low.
7 Product information Note •• Product information is subject to change without prior notice. Specifications Speaker Speaker Impedance Speaker Driver 8 ohm 1.5'' General information AC Power Operation Power Consumption Standby Power Consumption Dimensions - Main Unit (W x H x D) Weight - With Packing - Main Unit 14 EN Model: AS060-050EA120 Input: 100-240 V~, 50/60 Hz; 0.15A Output: 5.0 V 1.2 A 5W <1 W 144 x 144 x 65 mm 0.73 kg 0.
8 Troubleshooting Warning •• Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www. philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available. No power • Ensure that the power plug is connected properly.
Specifications are subject to change without notice © 2013 Koninklijke Philips Electronics N.V. All rights reserved. AJH510_37_UM_V1.