Always there to help you Register your product and get support at www.philips.
Contents 1 Important Know these safety symbols 2 Your clock radio Introduction What's in the box Overview of the clock radio 2 2 3 3 3 4 3 Get started 5 4 Set time and alarm 6 5 Listen to FM radio 7 6 Use Bluetooth devices 8 Install battery Connect power Turn on Set time Set alarm timer Prepare FM antenna Tune to FM radio stations Store FM radio stations automatically Store FM radio stations manually Select a preset radio station 8 Specifications 12 9 Troubleshooting 13 10 Notice 14 G
1 Important • Know these safety symbols This ‘bolt of lightning’ indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering. The ‘exclamation point’ calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems.
2 Your clock radio Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With this clock radio, you can • play audio from Bluetooth-enabled devices, or other external devices; • listen to FM radio; • charge your mobile devices; and • set two alarms to ring at different time.
Overview of the clock radio f a b c d g j h i e k l a SCAN/ • Press to set sleep timer. • Press and hold for two seconds to store radio stations automatically. b c SOURCE • Turn on the clock radio. • Switch to standby mode. • Select a source: Bluetooth, FM, or Aux. • / • • • In Bluetooth mode, press to start, pause, or resume play. Press to answer an incoming call. Press and hold for two seconds to reject an incoming call. During a call, press to end the current call.
3 Get started Always follow the instructions in this chapter in sequence. Install battery The batteries can only back up clock and alarm settings when AC power is disconnected. Connect power Caution •• Risk of product damage! Make sure that the power voltage corresponds to the voltage printed on the back or underside of the clock radio. •• Risk of electric shock! When you unplug the AC adapter, always pull the plug from the socket. Never pull the cord. Connect the AC power adaptor to the wall socket.
4 Set time and alarm 5 6 Press HR or MIN to select an alarm source: FM radio or buzzer. Press AL1 or AL2 again to confirm the alarm settings. Note Set time •• If the clock radio is idle for 10 seconds, it exits alarm setting mode automatically. Note •• You can only set time in standby mode. 1 2 3 4 Press and hold SET TIME for two seconds to activate time setting mode. »» The hour and minute digits blink. Press HR repeatedly to set hour. Press MIN repeatedly to set minute. Press SET TIME to confirm.
5 Listen to FM radio Prepare FM antenna Store FM radio stations automatically In FM tuner mode, press and hold SCAN for two seconds. »» All available FM radio stations are stored automatically. »» The first stored radio station broadcasts. For better reception, fully extend and adjust the position of the pig-tail antenna. Store FM radio stations manually You can store up to 20 FM radio stations.
6 Use Bluetooth devices With this clock radio, you can listen to audio from Bluetooth-enabled devices and control the incoming call through Bluetooth. Connect a device Note •• Make sure that your Bluetooth device is compatible If you cannot find [Philips AJT5300] for pairing, press and hold for two seconds to enter pairing mode, and then try again. »» After successful pairing and connection, [BT] (Bluetooth) stops flashing, and the clock radio beeps twice.
Control your phone call After Bluetooth connection, you can control your incoming phone call with this product. Button Function Press to answer an incoming call. During a call, press to end the current call. Press and hold for two seconds to reject an incoming call. Note •• Music play pauses when there is an incoming call, and resumes when the call ends.
7 Other features Listen to an external device With this clock radio, you can also listen to an external audio device such as an MP3 player. Charge your phone 1 With this clock radio, you can charge your phone through the USB socket. 1 Connect your phone and the clock radio with the charging cable of your phone (not supplied), as illustrated below. 2 3 Connect an audio input cable (not supplied) with a 3.
To deactivate the sleep timer: • Press repeatedly until [OFF] (off) appears. Tip •• If you press in standby mode, the clock radio will switch to FM tuner mode. Adjust volume While listening, press - VOLUME + to adjust volume.
8 Specifications Note •• Product information is subject to change without prior notice. Operation power consumption: 8.7 W Standby power consumption: <1 W Product dimensions – Main unit (W x H x D): 150 x 102 x 111 mm Rated output power (Amplifier): Product weight: 2.7W RMS @ 10% THD 0.5 kg Acoustic frequency response: 200 Hz - 16 KHz Speaker driver: 1 x 2”, 4 Ω Tuner frequency range: FM 87.5-108 MHz Number of preset stations: 20 USB charging: 5 V, 1 A Bluetooth version: V2.
9 Troubleshooting Warning •• Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www. philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available.
10 Notice Any changes or modifications made to this device that are not expressly approved by Gibson Innovations may void the user’s authority to operate the equipment. Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. This is CLASS II apparatus with double insulation, and no protective earth provided.
EN 15
Specifications are subject to change without notice. 2016 © Gibson Innovations Limited. All rights reserved. This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. AJT5300_12_UM_V2.