Register your product and get support at www.philips.
Contents 1 Important Risk of swallowing batteries 2 Your Docking Speaker for Android™ Introduction What's in the box Overview of the main unit Overview of remote control 2 2 3 3 3 4 5 5 Other features Use more features with DockStudio Listen to Internet radio Set sleep timer Set alarm timer Charge your device through the USB socket Play audio from an external device 6 Product information 3 Get started Prepare the remote control Connect power Turn on Switch to standby mode 6 6 6 6 6 Compatible with An
1 Important Risk of swallowing batteries 2 Read these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or produce heat.
2 Your Docking Speaker for Android™ Congratulations on your purchase, and ) * + : $ support that Philips offers, register your product at www.philips.com/welcome. Introduction With this docking speaker, you can: enjoy audio from your Bluetooth-enabled portable device or an external device; charge your portable device; and experience various features brought by Philips Philips DockStudio and Philips Songbird app.
Overview of the main unit e a f b c g d a Turn the speaker on. Switch the speaker to standby mode. Bluetooth indicator. b c AUX IN Connect an external audio device. d Charge your portable device through a USB cable. e Dock for Android-powered phone f +/ Adjust volume. 4 EN g 18V Connect power.
Overview of remote control i Start or pause play. j VOL +/ Adjust volume. a b f c g h d Songbird i e VOL j a Turn the speaker on. Switch the speaker to standby mode. Select Dock source. b c Internet Radio Listen to Internet radio through Philips DockStudio app. d Songbird Activate Songbird player. e Mute or resume sound. Select MP3 link source. Access the clock screen in DockStudio app. f g h / Select the previous or next track.
3 Get started Connect power Caution Always follow the instructions in this chapter in sequence. Risk of product damage! Ensure that the power voltage Prepare the remote control Caution Risk of explosion! Keep batteries away from heat, & " # $ " Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. corresponds to the voltage printed on the back or underside of the unit.
4 Play and charge Note Before you connect a Bluetooth device to this docking With this docking speaker, you can enjoy audio in two ways: through manual Bluetooth connection; through automatic Bluetooth connection with Philips DockStudio app. Compatible with Android™ speaker, familiarize yourself with the Bluetooth capabilities of the device. Keep this docking speaker away from other electronic devices that may cause interference. 1 On your docking speaker, press to activate Bluetooth.
Play audio through auto Bluetooth connection with Philips DockStudio Philips DockStudio app brings a suite of new features to your docking speaker, including automatic Bluetooth connection, Songbird music player, Internet radio and a multi-function alarm clock. To enjoy more features, you are recommended to download and install the free app. Install DockStudio app onto Androidpowered device 5 Play audio with the media player of your portable device.
2 Follow the on-screen instructions to install Philips DockStudio app. DockStudio The Philips DockStudio app brings a suite of cool, new features to your Philips DockStudio docking speaker, including automatic Bluetooth connection, Songbird music player, worldwide Internet radio, sound settings 3 When installation is complete, tap [Done] " Install DockStudio app through Android Market You can also search Philips DockStudio from Android Market directly, and then install the app.
The Philips DockStudio app brings a suite of cool, new features to your Philips DockStudio docking speaker, including automatic Bluetooth connection, Songbird music player, worldwide Internet radio, sound settings 2 Tap the search icon on the screen. 6 When installation is complete, tap [Done] " DockStudio 3 In the search bar, type in "Philips DockStudio" to search the app. 4 J & Philips DockStudio to start downloading.
Activate Bluetooth with DockStudio app Philips DockStudio app helps to connect your Android-powered device and docking speaker through Bluetooth automatically. Note Make sure that your Android-powered device is connected to the Internet. First-time launch 1 On your docking speaker, press activate Bluetooth. » begins to blink. 2 On the home screen of your device, tap the DockStudio icon to launch the app. to » The device starts to scan Philips devices that can be paired automatically.
» After Bluetooth connection, a different Bluetooth icon can be found on the top of the screen. 3 Tap [Speaker Connection] (Speaker ^ Bluetooth connection. Next-time launch # X DockStudio app, connect to the docking speaker through Bluetooth as below. 1 Activate the Bluetooth function of your docking speaker. 2 Launch Philips DockStudio to access its menu. 12 EN » It may take a few seconds to complete the connection.
Play audio from Android-powered device Note Make sure that the docking speaker is successfully connected to the Android-powered device through Bluetooth. 1 2 DockStudio Press to select the Dock source. Play audio on the Android-powered device. To pause or resume play, press . To skip to the previous or next track, press / . To adjust volume, press +/-. To mute or resume sound, press . » The DockStudio menu is displayed.
» You are requested to download Songbird. 3 Follow the on-screen instructions to download the app. 4 After installation, tap [Open] access Songbird menu. 5 Select a track, and then tap Tip To play audio through the Songbird player, press Songbird. 14 EN to play music.
Install Songbird on PC 1 2 Go to www.philips.com/songbird. Search Songbird. songbird 3 4 Download the latest Songbird application. » The device synchronizes with Philips Songbird automatically. Follow on-screen instructions to install Philips Songbird on your PC. If you didn't select auto sync, you can sync with Songbird manually. Sync with PC through Philips Songbird 1 Select the device under Devices. 2 Select Manual or Auto. 3 Click Sync.
2 If necessary, rotate the USB connector on the docking speaker, and then place your Android-powered phone onto the dock. Tip If the micro USB connector is located at the top, and your are using Android system of version 2.3 or above, screen auto-rotation is available. Use dock extension If the USB connector on your phone is close to the edge, the supplied dock extension can balance the docked phone, as illustrated. 3 Adjust the bumpers on both sides of the connector to stabilize the phone.
5 Other features Use more features with DockStudio With Philips DockStudio, you can also listen to Internet radio, set alarm timer and sleep timer. Note Make sure that your portable device is connected to the Internet. 5 Listen to Internet radio 1 Connect your Android-powered device and the docking system through Bluetooth. 2 Open Philips DockStudio to go to the main menu. 3 Tap [Radio] Select a radio station from the search result list. » The radio station begins to broadcast.
3 Tap the icon menu. to access the sleep timer Set alarm timer With Philips DockStudio, you can set multiple alarms and know the latest weather. It even alerts you when weather conditions are suitable for your favorite outdoors activity. 4 1 Launch the app. 2 Tap the icon menu. 3 Tap [Alarm settings] ` " Select a time period for the sleep timer, and then tap [Start] " to access clock setting Note This function only works with Philips Songbird.
4 Tap to access alarm setting menu. Note From the [Lifestyle] { $& ) X & & " The alarm will not ring if the weather is not good enough. Charge your device through the USB socket ^ 5 Set the alarm, and tap [Save] top right of the screen. » The new alarm is saved and displayed on the screen. | } $ ~ the socket at the back of the speaker. the USB socket on your device. » Your device begins charging.
Play audio from an external device You can listen to audio from an external device through this speaker. 1 2 Press 3 Play audio on the external device (see the " 20 EN to select MP3 link source. ^ *Y ? $ to: the AUX IN socket. the headphone socket of an external device.
6 Product information Note Product information is subject to change without prior notice. Rated Output Power AC Power Operation Power Consumption Eco Standby Power Consumption Dimensions - Main Unit X X Weight - Main Unit Charging: - Only through Micro USB connector - Only through the socket - Through Micro USB connector and the socket 2 X 15 W RMS Model: OH1065A1803500U2 * G Input: 100-240 V~, 50/60 Hz, 1.5 A; Output: 18 V 3.5 A 28 W <1 W 429 X 169 X 108 mm 2.
7 Troubleshooting Warning # " To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www. " " * & make sure that the device is nearby and the model number and serial number are available.
8 Notice ` device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. # ) household waste. Please inform yourself about the local rules on the separate collection of electrical and electronic products and batteries.
Specifications are subject to change without notice © 2012 Koninklijke Philips Electronics N.V. All rights reserved. AS851_98_CCR_V2.
