User manual

Problem Possible cause Solution
The shaver does
not shave as well
as it used to.
The shaving
heads are
damaged or
worn.
Replace the shaving heads
(see chapter ‘Replacement’).
Foam or gel
residues clog
up the shaving
heads.
Rinse the shaving unit under a
hot tap (see section ‘Cleaning
the shaving unit under the
tap’ in chapter ‘Cleaning and
maintenance’).
Long hairs
obstruct the
shaving heads.
Clean the shaving heads one by
one (see section ‘Cleaning the
shaving unit with the cleaning
brush’ in chapter ‘Cleaning and
maintenance’).
You have not
inserted the
shaving heads
properly.
Make sure that the projections
of the shaving heads t exactly
into the recesses (see section
‘Cleaning and maintenance’).
The shaver does
not work when I
press the on/off
button.
The
rechargeable
battery is empty.
Recharge the battery
(see chapter ‘Charging’).
The temperature
of the shaver is
too high. In this
case, the shaver
does not work.
As soon as the temperature
of the shaver has dropped
sufciently, you can switch on
the shaver again.
The shaver does
not work, although
it is connected to
the mains.
This shaver is
not designed to
be used directly
from the mains.
Recharge the battery
(see chapter ‘Charging’) and
disconnect it from the mains.
ENGLISH22