CD Soundmachine User manual Manuel d’utilisation Manual del usuario Benutzerhandücherer AZ1053 Meet Philips at the Internet http://www.philips.
1 1 2 3 4 5 # 6 7 8 9 0 ! @ 2 6 x R14 • UM-2 • C-CELLS $
Important notes for users in the U.K. Remove fuse cover and fuse. Fix new fuse which should be a BS1362 3 Amp, A.S.T.A. or BSI approved type. Refit the fuse cover. Mains plug This apparatus is fitted with an approved 13 Amp plug.To change a fuse in this type of plug proceed as follows: 1. 2. 3. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a value of 3 Amp.
English Supplied Accessories – AC power cord Top/front panels (See 1) 1 Source selector: CD,TUNER,TAPE/OFF – selects CD, radio or tape source of sound – power off switch 2 CASSETTE RECORDER keys: PAUSE 8 – pauses playback or recording STOP•OPEN 9/ – stops the tape or recording; – opens the cassette holder. F.FWD 5 / REW 6 – fast winds/ rewinds tape PLAY 1 – starts playback REC 0 – starts recording.
Digital Tuner Digital tuner 4 3 2 1 Repeat step 3 if necessary until you find the desired station. Press and hold TUNING ∞ or § until the frequency in the display starts running. ➜ The radio automatically tunes to a station of sufficient reception. Display shows Srch during automatic tuning. Push BAND to FM or MW to select desired waveband. Push the source selector to TUNER. ➜ tu is displayed briefly, then the radio station frequency, waveband and, if programmed, a preset number are shown.
CD Player Programming track numbers 1 In the stop position, press TUNING ∞ or § to select your desired track number. You may store up to 20 tracks in the desired sequence. If you like, store any track more than once. 2 Press PROG to store the desired track number. ➜ “PROG” is displayed, and display briefly shows current program sequence, then the currently stored track number. (see 5 6) 3 To play your program, press 2;. Repeat steps 1 to 2 to select and store all desired tracks in this way.
• • • • Always close the CD-tape door to avoid dust on the lens. Sudden changes in the surrounding temperature can cause condensation on the lens of your CD player. Playing a CD is then not possible. Do not attempt to clean the lens but leave the set in a warm environment until the moisture evaporates. The lens of the CD player should never be touched! If the CD player cannot read CDs correctly, use a cleaning CD to clean the lens before taking the set to repair. Press PLAY and clean the roller C.
Environmental information All unnecessary packaging material has been omitted.The packaging can be easily separated into three materials: cardboard, polystyrene and plastic. Your set consists of materials which can be recycled if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging, dead batteries and old equipment.