User manual

9 EN
5 Product
information
Note
•
Product information is subject to change without prior
notice.
Specications
Amplier
Rated Output Power 2 x 1 W RMS
Frequency Response 63 -14000 Hz, -3 dB
Signal to Noise Ratio >57 dBA
Total Harmonic Distortion <1 %
Audio-in Input 650 mV RMS
Disc
Laser Type Semiconductor
Disc Diameter 12cm/8cm
Support Disc CD-DA, CD-R, CD-RW
Total Harmonic
Distortion <1%
Frequency Response 63 -14000 Hz, -3 dB
Signal to Noise Ratio >57 dBA
Tuner
Tuning Range FM: 87.5 - 108MHz
Total Harmonic Distortion <3 %
Signal to Noise Ratio >50 dBA
General
Power supply
- AC Power
- Battery
220 - 240V, 50/60 Hz
9V,6x1.5VR14/UM2
Operation Power
Consumption 15 W
Standby Power
Consumption < 0.5 W
Dimensions - Main Unit
(WxHxD) 261 x 123 x 245 mm
Weight - Main Unit 1.1 kg
Maintenance
Clean the cabinet
• Use a soft cloth slightly moistened with
a mild detergent solution. Do not use a
solution containing alcohol, spirits, ammonia
or abrasives.
Clean discs
• When a disc becomes dirty, clean it with
a cleaning cloth. Wipe the disc from the
centre out.
• Do not use solvents such as benzene,
thinner, commercially available cleaners,
or antistatic spray intended for analogue
records.
Clean the disc lens
• After prolonged use, dirt or dust may
accumulate at the disc lens. To ensure good
play quality, clean the disc lens with Philips
CD lens cleaner or any commercially
available cleaner. Follow the instructions
supplied with cleaner.