User manual
Table Of Contents
8EN
4 Play
Play disc
1
Switch the source selector to CD.
2 Lift to open the disc compartment.
3 Insert a disc with the printed side facing up,
then close the disc compartment.
» Play starts automatically.
Control play
/ Selectanaudiole;
Press and hold to fast-forward
or fast-reverse the track during
playback, then release to resume
play.
Pause or resume play.
Stop play.
REPEAT [
]: Play the current track
repeatedly.
[
]: Play all tracks repeatedly.
SHUFFLE [
]: Play tracks randomly.
- VOLUME + Adjust volume.
Enhance bass
To turn dynamic bass boost on or off, slide DBB
switch to ON or OFF.
Program tracks
You can program a maximum of 20 tracks.
1 Press to stop playback.
2 Press PROG to activate the program
mode.
» [PROG] (program)begintoblink.
3 Press / to select a track number,
and then press PROGtoconrm.
4 Repeat step 3 to program more tracks.
5 Press to play the programmed tracks.
» During play, [PROG] (program)and
the preset number are displayed.
• To erase the program, press
twice.
Listen to FM radio
Note
•
Position the antenna as far as possible from TV, VCR or
other radiation source.
• For optimal reception, fully extend and adjust the
position of the antenna.
1 Switch the source selector to FM.
2 Rotate - TUNING + to tune to an FM
radio station.
Play from an external device
You can also listen to an external audio device
through this unit.
1 Switch the source selector to Audio-in.
2 Connect an audio cable (3.5mm, not
supplied)to:
• the Audio-in socket on the unit.
• the headphone socket on an external
device.
3 Play the external device (see the device's
usermanual).
Note
•
The Audio-in socket is not for headphones.