User manual
English
DIGITAL TUNER
11
TUNING TO RADIO STATIONS
1. Select TUNER source.
™ is displayed briefly and then the radio station
frequency is shown.
2. Press BAND once or more to select your waveband.
3. Press SEARCH ∞ or § and release when the frequency in
the display starts running.
™ The tuner automatically tunes to a station of sufficient
reception. Display shows during automatic tuning.
™ If an FM station is received in stereo,
STEREO is shown.
4. Repeat step 3 if necessary until you find the desired station.
• To tune to a weak station, press SEARCH ∞ or § briefly and
repeatedly until you have found optimal reception.
5. Adjust the power slider to TAPE/
OFF position to switch off the
set.
To improve radio reception
– For FM, pull out the telescopic antenna. Incline and turn the
antenna. Reduce its length if the signal is too strong (very
close to a transmitter).
– For AM, the set is provided with a built-in antenna so the
telescopic antenna is not needed. Direct the antenna by
turning the whole set.
Favorite station selection
For your favorite 3 tuner stations, you can use the easy one-touch
programming and selection 1, 2 or 3 buttons.
1. Tune to your desired station (see Tuning to radio stations).
2. To store your station, press 1, 2 or 3 for 2 seconds or more.
™ Display: shows
PROGRAM briefly, your favorite preset station
number and the tuner frequency.
Programming radio stations
You can store up to a total of 30 radio stations in the memory.
1. Tune to your desired station (see Tuning to radio stations).
2. Press PROGRAM to activate programming.
– Display:
PROGRAM flashes.
3. Press PRESET 4 or 3 once or more to allocate a number from
1 to 30 to this station.
4. Press PROGRAM again to confirm the setting.
– Display:
PROGRAM disappears, the preset number and the
frequency of the preset station are shown.
5. Repeat the above four steps to store other stations.
– You can overwrite a preset station by storing another
frequency in its place.
Tuning to preset stations
Press 1, 2, 3 or PRESET 4 or 3 until the desired preset station is
displayed.
AZ 1140 /17 page 11
P
R
O
G
R
A
M
R
E
P
E
A
T
A
L
L
C
D
SEARCH
ST
O
P•
O
PE
N
S
EA
RC
H
P
LA
Y
R
E
C
O
R
D
1
2
3
B
AN
D
PRESET
PROGRAM
M
T
D
SEARCH
S
EA
RC
H
P
LAY
R
E
C
O
R
D
1
2
3
B
AND
PRESET
PROGRAM
G
R
A
M
P
E
A
T
A
L
L
C
D
SEARCH
PE
N
S
EA
RCH
PLA
Y
R
E
C
O
R
D
1
2
3
BAN
D
PRESET
PROGRAM
XP AZ 1140/17 02-02-2000 11:53 Pagina 11