User's Manual

FEATURES

Use the AY 3767 cord remote control. The buttons on the remote control have the

same functions as the corresponding buttons on the CD player.

1 If necessary press 9 once or twice until the set is switched off.

2 Firmly connect the remote control to LINE OUT/p and the headphones to the

remote control’s socket.

3 Turn the volume down with VOL F on the remote control and set VOL E on

the CD player to position 8.

You can connect your CD player to digital equipment (e.g. a CD recorder) with a

DIGITAL OPTICAL IN/AUX socket.

1 Use the mains adapter, switch ESP off and turn down the volume of the appliance

that should be connected.

2 Connect an optical cable or signal lead to the OPT OUT socket of your CD player

and to the DIGITAL OPTICAL IN/AUX socket of the other appliance.

• To adjust volume and sound, use the controls of the connected appliance.

Notes: – For analogue connections use the LINE OUT/p socket.

– Playback via OPT OUT does not work if the player is supplied by batteries.

Optical out (not on all versions)

Remote control (not on all versions)

English