User Manual

RADIO
20
You can tune to any FM or AM station automatically or
manually. Stereo stations are indicated by ST.
1 Press RADIO·BAND to switch the radio on.
2 Press RADIO·BAND repeatedly if necessary to select
the desired waveband.
y FM 1, FM 2, FM 3, FM 4 or AM is shown.
Tuning to radio stations automatically
1 Keep 3 or 4 pressed for at least 1 second.
y The radio tunes to a station with sufficient
strength and radio play starts.
A (for “automatic search”) and the current
waveband and frequency are displayed.
2 Repeat searching until you find the desired radio station.
Tuning to radio stations manually
1 Keep 3 or 4 pressed.
2 Release 3 or 4, then briefly press 3 or 4 again
when you are close to the desired frequency.
3 Briefly press 3 or 4 repeatedly until you reach the
desired frequency.
y Radio play starts. The current waveband and
frequency are displayed.
• To switch from radio play to CD play, press 2;.
• Press 9 to switch the radio off.
Note: In case of interferences in stereo mode, press ·MODE to switch to mono.
P
R
O
G
R
A
M
C
K
R
A
D
IO
·B
A
N
D
E
T
·
Radio play
English