BDL4220QL www.philips.
BDL4220QL Safety Instructions TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Warnings and Precautions The Socket-outlet should be installed near the apparatus and be easily accessible. KNOW THESE SAFETY SYMBOLS Read and follow these instructions when connecting and using your Public Information Display: CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
BDL4220QL Important Safety Instructions CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock,do not perform any servicing other than that contained in the operating instructions unless you are qualitified to do so. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
BDL4220QL Regulatory Information Federal Communications Commission (FCC) Notice (U.S.
BDL4220QL Polish Center for Testing and Certification Notice Information for U.K. only WARNING – THIS APPLIANCE MUST BE EARTHED. The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works together (computer, display, printer, and so on) should have the same power supply source.
BDL4220QL China RoHS 中国电子信息产品污染控制标识要求 仅适用于非热带气候条件下安全使用 : 本产品有毒有害物质或元素的名称及含量标识表: 汉 有毒有害物质或元素 零部件名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr 6+) (PBBs) (PBDEs) 塑料外框 O O O O O O 后壳 O O O O O O CCFL X X O O O O LCD 面板 LED X O O O O O 电源基板 X O O O O O 主基板 X O O O O O 按键基板 X O O O O O 底座 O O O O O O 电源线 X O O O O O 其他线材 X O O O O O 遥控器 X O O O O O *:电路板组件包括印刷电路板及其构成的零部件,如电阻、电容、 集成电路、连接器等。 ○:表示该有害物质在该部件所有均质材料中的含量均在SJ/ T11363-2006《电子信息产品中有毒有害物质的限量要求》规定的 限量要求以下。 蒙古文 文 仅适用于非热带气候条件下安全使用。 藏 文 维 文 壮 文 Dan h
BDL4220QL North Europe (Nordic Countries) Information End-of-Life Disposal Your new Public Information Display contains materials that can be recycled and reused. Specialized companies can recycle your product to increase the amount of reusable materials and to minimize the amount to be disposed of. Placering/Ventilation VARNING: Please find out about the local regulations on how to dispose of your old display from your local Philips dealer.
BDL4220QL Table Of Contents 1. 2. 3. Unpacking and Installation...................................... 1 1.1. Unpacking......................................................................1 1.2. Package Contents......................................................1 1.3. Installation Notes.......................................................1 1.4. Mounting on a Wall..................................................2 5.2. 5.3. Settings.................................................................
BDL4220QL 1. Unpacking and Installation 1.1. Unpacking • This product is packed in a carton, together with the standard accessories. • Any other optional accessories will be packed separately. • Due to the size and weight of this display it is recommended for two people to move it. • After opening the carton, ensure that the contents are complete and in good condition. 1.2.
BDL4220QL 1.4. Mounting on a Wall To mount this display to a wall, you will have to obtain a standard wall-mounting kit. We recommend using a mounting interface that complies with UL1678 standard in North America. 400 Protective Sheet 400 Table 1. Lay a protective sheet on a table, which was wrapped around the display when it was packaged, beneath the screen surface so as not to scratch the screen face. 2. Ensure you have all accessories for mounting this display. 3.
BDL4220QL 2. Parts and Functions 2.1. Control Panel 1 2 INPUT 3 MENU 4 5 6 8 7 1 [ ] button 8 Press to switch the display on or off. 2 [ • ] button [ -- Lights off when the main power of this display is turned off ] button Press to access the OSD menu. 4 [ ] button Press to move the highlight bar up to adjust the selected item while OSD menu is on. 5 [ ] button Press to move the highlight bar down to adjust the selected item while OSD menu is on.
BDL4220QL 2.2. Input/Output Terminals IN IN 14 13 OUT 2 15 OUT 16 12 11 R 10 9 R L 1 L 8 Y 3 1 4 6 5 AC IN 11 MAIN POWER SWITCH 12 AC power input. 2 3 4 IR IN (3.5 mm) NOTES: • DVI IN This display’s remote control sensor will stop working if the jack [IR IN] is connected. • To remotely control your A/V device via this display, refer to page 8 for IR Pass Through connection. RJ-45 14 RS232C OUT / 15 RS232C IN (2.
BDL4220QL 2.3. Remote Control 7 button Confirm an entry or selection. 2.3.1. General functions 8 ADJUST button Access currently available options, picture and sound menus. 1 9 2 10 3 14 11 12 15 Select tasks or options. 13 6 8 14 16 15 10 11 12 INFO button OPTIONS Access currently available options, picture and sound menus. 10 13 POWER button Switch this display on or off. PLAY buttons Control playback of media files. SOURCE button Select input source.
BDL4220QL 2.3.2. Inserting batteries in the remote control The remote control is powered by two 1.5V AAA batteries. To install or replace batteries: 1. Press and then slide the cover to open it. 2. Align the batteries according to the (+) and (–) indications inside the battery compartment. 3. Replace the cover. Caution: The incorrect use of batteries can result in leaks or bursting.
BDL4220QL 3. Connection NOTE: The peripherals and cables shown are for example purposes only. Connecting External Equipments USB PC OUT COMPONENT OUT (YPbPr) AUDIO OUT AUDIO IN SPDIF OUT AUDIO OUT AUDIO IN DVD / VCR / VCD HDMI OUT R L R L AC IN Y HDMI IN 7 DVI IN RJ-45 VGA IN Pb Pr COMPONENT IN DVI OUT VGA OUT IN STEREO AMPLIFIER IN RS232C AUDIO OUT AUDIO IN USB USB IR 3.1.
BDL4220QL 3.2. Connecting Multiple Displays 3.2.1. RS232C control connection (optional) DISPLAY 2 DISPLAY 1 [RS-232C] PC [RS232C IN] [RS232C OUT] [RS232C IN] [RS232C OUT] 3.2.2. IR connection (optional) DISPLAY 1 External IR Receiver [IR IN] DISPLAY 2 [IR OUT] [IR IN] NOTE: This display’s remote control sensor will stop working if the [IR IN] is connected. 3.3.
BDL4220QL 3.4. Wire-connecting to Network (optional) If you connect this display to a home network, you can play photos, music and videos from your computer. See Play multimedia files (Page 10) for more detail. INTERNET [RJ-45] ROUTER [RJ-45] PC To setup the network: 1. Switch on the router and switch on its DHCP setting. 2. Connect the router to this display with an Ethernet cable. 3. Press button on the remote control, then select {Setup}. 4. Select {Connect to network}, then press button. 5.
BDL4220QL 4. Operation • {News}: Ideal settings for spoken audio, such as the news. NOTE: The control button described in this section is mainly on the remote control unless specified otherwise. 4.5. 4.1. • Your computer connected through your home network. • A USB device connected to this display. You can play videos, photos, and music on your display from: Watch the Connected Video Source See page 7 for external equipments connection. 1. Press 2. Press button.
BDL4220QL 4.5.2. Play multimedia files from USB device • This display can play music, movie, or photo files from your USB device. 1. Connect your USB device to the USB port on this display. 4.6. USB USB Play options IN 4.6.1. Playing music files in the top bar. OUT 1. Select Music AUDIO IN SPDIF OUT 2. Select one music track, then press AUDIO OUT IR IN RS232C Do not overload the USB port.
BDL4220QL 4.6.2. Playing movie files 4.6.3. Playing photo files 1. Select Movie 1. Select Photo in the top bar. 2. Select a video, then press Info 2. Select a photo thumbnail, then press button. The Movie 11:22:33 88.88MB 2013-05-05 The Movie 11:22:33 88.88MB 2013-05-05 The Movie 11:22:33 88.88MB 2013-05-05 The Movie 11:22:33 88.88MB 2013-05-05 Play All USB device Help Info Options To play all the videos in a folder, select one video file, then select {Play All}.
BDL4220QL 5. Change your settings Using this display’s control buttons: Using the remote control: INPUT MENU 1. Press 2. Press 1. Press button to display the OSD menu. , or button to select {Setup}. Press button to enter. ][ button to confirm menu selection and enter its 4. Press button to exit the OSD menu. Quick Picture and Sound You can select picture and sound settings with the help of the settings assistant, which demonstrates the effect of your chosen setting immediately. 1.
BDL4220QL 5.2.2. Sound menu Backlight contrast Adjust the brightness of this display’s backlight. Colour Picture Sound style Adjust the colour saturation of the picture. Sound Restore style Sharpness General settings Bass Treble Adjust the sharpness of the picture. Surround mode Noise reduction Audio out Select the amount of noise reduction for the picture. Advanced MPEG artifact reduction Smoothen transitions and haziness in the digital picture.
BDL4220QL 5.2.3. General settings menu Picture Menu language Sound Monitor id General settings Eco mode • {Lock but volume}: Disable all the button function except the button. • {Lock but power}: Disable all the button function except the button. NOTE: To disable the lock function from [Local KB lock] or [RC lock] item, press buttons 1998 on the remote control. Auto search Clock USB scheduling Factory settings Sleep timer Reset all your customized settings to the factory defaults.
BDL4220QL 6. Input mode PC Resolution: Standard Resolution Active Resolution H Pixels Refresh Rate Pixel Rate 480 60 Hz 25.175 MHz 480 72 Hz 31.5 MHz 480 75 Hz 31.5 MHz 400 70 Hz 33.75 MHz 600 60 Hz 40 MHz 600 75 Hz 49.5 MHz 768 60 Hz 65 MHz 768 75 Hz 78.75 MHz V Lines Aspect Ratio Stand for Mode 4:3 Video Graphic Array 16:9 Wide Video Graphic Array 4:3 Super VGA 4:3 Extended Graphic Array VGA 640 WVGA 720 SVGA 800 XGA 1024 WXGA 1280 768 60 Hz 79.
BDL4220QL 7. Pixel Defect Policy We strive to deliver the highest quality products and use some of the industry’s most advanced manufacturing processes whilst practicing stringent quality control. However, pixel or sub-pixel defects on the PDP / TFT panels used in Plasma- & LCD- displays are sometimes unavoidable.
BDL4220QL 7.4. Dark Dot Defects Black dot defects appear as pixels or sub-pixels that are always dark or “off ”. These are the examples of black dot defects: One dark dot 7.5. Two adjacent dark dots = 1 pair of dark dots Two dark dots, specifications defines the minimum distance between dark dots Proximity of Pixel Defects Because pixel and sub-pixels defects of the same type that are nearby one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects.
BDL4220QL 8. Cleaning and Troubleshooting 8.1. Cleaning Caution When Using the Display • Do not bring your hands, face or objects close to the ventilation holes of the display. The top of the display is usually very hot due to the high temperature of exhaust air being released through the ventilation holes. Burns or personal injuries may occur if any body parts are brought too close.
BDL4220QL 8.2. Troubleshooting Symptom Possible Cause Remedy No picture is displayed 1. The power cord is disconnected. 1. Plug in the power cord. 2. The main power switch on the back of the display is not switched on. 2. Make sure the power switch is switched on. 3. The selected input has no connection. 3. Connect a signal connection to the display. 4. The display is in standby mode.
BDL4220QL 9. Technical Specifications Display: Item Specifications Screen Size (Active Area) 42” LCD (106.7 cm) Aspect Ratio 16:9 Number of Pixels 1920 (H) × 1080 (V) Pixel Pitch 0.4845 (H) × 0.4845 (V) [mm] Displayable Colors 16.7 Million colors Brightness 350 cd/m² Contrast Ratio (Typical) 3000:1 Viewing Angle 178 degrees In/Out Terminals: Item Specifications Speaker Output Internal Speakers 7W (L) + 7W (R) [RMS]/16Ω, 1 Way 1 Speaker System Audio Output RCA Jack × 2 0.
© 2013 Koninklijke Philips Electronics N.V. All rights reserved. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips Electronics N.V. and are used under license from Koninklijke Philips Electronics N.V. Specifications are subject to change without notice.