User manual

EN 30
8.13. Switching camera angles
[BD Video]
[DVD Video]
Some BD-videos and DVD-videos contain scenes which have been shot simultaneously from various angles. You
can change the camera angle when appears on the TV screen.
1. During playback, press [OPTIONS] to display the play menu.
2. Use [
] to select ˝Angle˝, then press [OK].
3. Use [
] to select your desired angle.
• The selected angle will be displayed on the display bar at the top of the TV screen.
4. Press [BACK] to exit.
NoteD
• If ˝Ang le Ico n˝ setting is set to ˝Off˝, will not appear on the TV screen.
8.14. Noise reduction
[BD Video]
[DVD Video]
[AVCHD]
Reduces the noise of the playback picture.
1. During playback, press [OPTIONS] to display the play menu.
2. Use [
] to select ˝Noise Reduction˝, then press [OK].
3. Use [
] to select your desired setting.
e.g.) Blu-ray Disc™
Noise Reduction
O
˝On˝: Activates noise reduction.
˝Off˝: Deactivates noise reduction.
4. Press [BACK] to exit.
NoteD
• The setting will remain the same even if the unit is switched to standby mode.
8.15. CLEAR+
[BD Video]
[DVD Video]
[AVCHD]
CLEAR+ enhances the contrast of the picture and makes edges crisp. It is effective especially for DVD’s.
1. During playback, press [OPTIONS] to display the play menu.
2. Use [
] to select ˝CLEAR+˝, then press [OK].
3. Use [
] to select your desired setting.
e.g.) Blu-ray Disc™
CLEAR+
O
˝On˝: Gives low-definition videos high-definition like picture quality.
˝Off˝: Shows the original picture as recorded.
4. Press [BACK] to exit.
NoteD
• Pictures may appear whiter depending on the material and the connected TV. In this case, turn ˝CLEAR+˝ Off.
• ˝CLEAR+˝ is not effective under the following conditions.
- When the material is in 1080p/24 which is commonly used in Blu-ray™ discs.