User manual

3. Functional overview
3.1. Front panel
1 3* 4*2 5* 76
* The unit can also be turned on by pressing this button.
1. Disc tray
2. Infrared sensor window
3. A (OPEN/CLOSE) button*
4. Kt (PLAY/PAUSE) button*
•
Press to start playback.
•
During playback, press to pause playback.
5. B (POWER) button*
6. Power-on indicator
7. USB input
Caution
•
Do not connect any device other than USB memory stick or USB card reader into the USB input. (e.g. PC, external
HDD, digital camera, keyboard, mouse, etc.)
•
When connecting a USB memory stick, connect it directly to the USB input. Do not use a USB extension cable.
Note
•
Due to new ENERGY STAR
®
requirements, this unit will automatically turn on the screen saver after 5 minutes of
inactivity and enter standby mode after 25 minutes of inactivity.
3.2. Rear panel
12
1. AC power cord
2. HDMI OUT jack
Caution
•
Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to
the unit.
•
This unit does not have a TV RF modulator.
9EN