Blu-ray Disc Player User Manual

40
EN
7 Additional Information
Update software
For software updates to enchance performance, check the current software
version of this product to compare with the latest software (if available) at
the Philips website.
1 Press .
2 Select [Settings], then press OK.
3 Select [Advanced Setup] > [Version Info.], then press OK.
Update software via USB
1
Go to www.philips.com/support to check if the latest software
version is available for this product.
2 Download the software onto a USB flash drive.
3 Insert the USB flash drive to the USB jack of the rear panel.
4 In the Home menu, select [Settings] > [Advanced Setup] >
[Software Download] > [USB].
5 Follow the instructions on the TV screen to confirm update
operation.
Once software update is complete, this product automatically turns »
off to standby.
6 Disconnect the power cord for a few seconds and connect again to
turn on this product.
Note
Do not turn off the power or remove the USB flash drive when software updating is •
in progress to prevent possible damage of this product.