Blu-ray Player User Manual

Sound

1 Press .

2 Select [Setup] > [Audio] to access the audio setup options.

• [Night Mode]: Select quiet or full dynamic sound. Night mode decreases the volume of loud

sound and increases the volume of soft sound (such as speech).

• [Neo 6]: Enable or disable a surround sound effect which is converted from 2.0 channel audio.

• [HDMI Audio]: Set an HDMI audio format when this player is connected through HDMI.

• [Digital Audio]: Select an audio format for the sound output when this player is connected

through a digital connector (coaxial).

• [PCM Downsampling]: Set the sampling rate for PCM audio output when this player is

connected through a digital connector (coaxial).

Note

• For settings related to HDMI, the TV must be connected through HDMI.

• Night mode is only available for Dolby encoded DVD and Blu-ray discs.

Network (installation, status...)

1 Press .

2 Select [Setup] > [Network] to access the network setup options.

• [Network Installation]: Start a wired or wireless installation to make the network work.

• [View Network Settings]: Display the current network status.

Preference (languages, parental control...)

1 Press .

2 Select [Setup] > [Preference] to access the preference setup options.

• [Menu language]: Select an onscreen display menu language.

• [Audio]: Select an audio language for video.

• [Subtitle]: Select a subtitle language for video.

• [Disc Menu]: Select a menu language for a video disc.

• [Parental Control]: Restrict access to discs that are encoded with ratings. Input “0000” to

access the restriction options. To play all discs irrespective of the rating, select level “8”.

• [Screen Saver]: Enable or disable screen saver mode. If enabled, the screen enters idle mode

after 10 minutes of inactivity (for example, in pause or stop mode).

• [Auto Subtitle Shift]: Enable or disable subtitle shift. If enabled, the subtitle position is changed

automatically to ﬁt the TV screen (this feature works with some Philips TVs only).

• [Change Password]: Set or change a password to play a restricted disc. Input “0000” if you do

not have a password or if you have forgotten your password.