Blu-ray Disc™ / DVD Player BDP3502 Register your product and get support at www.philips.com/welcome EN User Manual EN For further assistance, call the customer support service in your country. • To obtain assistance, contact Philips Customer Care Center; In the U.S.A., Canada, Puerto Rico, or the U.S.
CONTENTS INTRODUCTION.................................................. 3 LIST OF SETTINGS.............................................31 Safety instruction............................................................3 Included accessories..................................................... 6 SETUPS............................................................... 33 EasyLink (HDMI CEC).................................................. 33 HDMI video resolution................................................
1. INTRODUCTION 1.1. Safety instruction Register online at www.philips.com/welcome today to get the most benefits from your purchase. Registering your model with Philips makes you eligible for all of the valuable benefits listed below, so don’t miss out. Register online at www.philips.com/welcome to ensure: * Product Safety Notification * Additional Benefits By registering your product, you’ll receive notification - directly from the manufacturer - in the rare case of a product recall or safety defect.
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
IMPORTANT COPYRIGHT INFORMATION Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited. Never use a gas duster on this unit. The gas trapped inside of this unit may cause ignition and explosion.
Notice Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips N.V. or their respective owners. P&F USA reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The material in this manual is believed adequate for the intended use of the system.
2. FEATURES 2.1. Features Blu-ray Disc™ Pop menu You can enjoy Blu-ray Disc™ which is capable of storing five times more data than a conventional DVD. Some BD-videos have a Pop menu which is a navigation menu that can be called up and be operated on the TV screen without interrupting playback. You can call up the Pop menu by pressing [POP MENU]. Contents in the Pop menu vary depending on the disc.
2.2. Version info ˝Version Info˝ screen provides information about this unit’s software version. You can also download the latest software from the Philips website and update it yourself if it is newer than the version currently on your unit. The current version of software on your unit can be seen on the ˝Version Info˝ screen. To access ˝Version Info˝, follow the procedure below. 1. Press [Q(HOME)]. 2. Use [ ] to select ˝Setup˝, then press [OK]. 3. Use [ ] to select ˝Advanced Setup˝, then press [OK].
3. FUNCTIONAL OVERVIEW 3.1. Front panel 1 2 3 4* 5 6 * The unit can also be turned on by pressing this button. 1. Disc tray 3. Infrared sensor window 2. Power-On indicator –– Blinks when the unit is starting up. –– Lights up if the unit is turned On and the Home Menu will be displayed on the TV screen. 4. (OPEN/CLOSE) button* 5. (STANDBY/ON) button 6. USB input CC Cautio • • Do not connect any device other than USB memory stick or USB card reader into the USB Input. (e.g.
3.3. Remote control 8. (SKIP) button • During playback, press once to return to the beginning of the current title, chapter, track or file. • During playback, press twice to return to the previous title, chapter, track or file. • During photo playback, press to return to the previous File. 9. (PLAY/PAUSE) button* • Press to start playback or resume playback. • Press to pause playback. 10. (REVERSE) button • During playback, press to Fast Reverse the playback. 1 11 2 3 4 12 13 14 15 11.
DD Not CC Using the remote control • Remote control usage guidelines: • Make sure that there are no obstacles between the remote control and the infrared sensor window on the unit. • Remote operation may become unreliable if strong sunlight or fluorescent light is shining on the infrared sensor window of the unit. • Remote controls of different devices can interfere with each other. Avoid using a remote control from another device which is located close to the unit.
3.4. Guide to on-screen display CC Home menu When you Turn On the unit, Home Menu will appear automatically. Otherwise, press [ 1 Play Disc 1. 2 Browse USB ˝Play Disc˝: (HOME)]. 3 Setup Initiates playback of inserted disc, displays a list of Tracks / Files or the Media Filter Menu 2. ˝Browse USB˝: Displays a list of Tracks / Files on the connected USB Memory Stick or the Media Filter Menu 3.
4. CONNECTIONS 4.1. Connection to a TV CC HDMI connection (Supports up to 4K(*1), 4K/24(*2) resolution.) Your TV HDMI cable (not included) HDMI IN (*1) 4K: (*2) 4K/24: • • • Outputs video data with a frame rate of 60 frames per second. Outputs video data with a frame rate of 24 frames per second. Do not tilt the connector when inserting it into the HDMI jack, and make sure the shapes of the jack and the connector are matched.
4.3. HDMI audio output “HDMI Audio” setting A Media È “LPCM” “Blu-ray Disc audio” setting A “All” or “All” or “Primary/ “Primary audio only” “Primary/ “Primary audio only” Secondary Audio” Secondary audio” Audio Source È Which audio format can be output depends on compatibility of the connected device.
5. BEFORE YOU START 5.1. Finding a viewing video source input on your TV after you have completed all of the connections to your TV, review the steps below. 1. Press [ (POWER)] to Turn On the unit. 2. Turn On your TV. • If the TV is connected by an HDMI cable, it may take a few moments for the initial screen to appear. 5.2. Initial setup Please follow the instructions below to complete the initial setup. 1. Language setup screen will appear. Use [ Please select your language for on-screen display.
6. INFORMATION ON PLAYBACK 6.1. Information on playback CC Playable discs and files Playable discs Logos Blu-ray Disc™ - BD-video - BD-RE* (ver. 2.1) (Recorded in BDMV format) - BD-R* (ver. 1.1 / 1.2 / 1.3) (Recorded in BDMV format) (Unfinalized disc may not be played back.
CC Recommended specifications AVCHD This unit cannot play back stand-alone AVCHD files (*.m2ts, *.mts or *.m2t) written to a DVD or copied to an SD memory card. The DVD or SD memory card containing AVCHD files must have a proper file and folder structure meeting AVCHD format specifications. Please use AVCHD compliant device / software to burn or copy AVCHD files to DVD or SD memory card. (Please refer to user manuals of your device / software for more information.
CC Unplayable media and files The following discs will not be played back on this unit. • • • • • • • • • • • • • CD-ROM • CD-I (compact disc-interactive) DVD-RAM • VSD (video single disc) DVD-audio • video CD HD DVD • SVCD SDXC memory card • microSDXC memory card unfinalized disc • BD-RE (ver. 1.0) BD-RE (ver. 2.1) (Recorded in BDAV format) • BD-R (ver. 1.1 / 1.2 / 1.
CC Description for icons [ ] : group (folder) icon [ ] : music file icon [ ] : photo file icon --˝Folders˝ refers to the group of files. --˝Track˝ refers to the contents recorded on the audio CD. --˝Files˝ refers to the contents on a disc which are recorded in AVCHD or JPEG file format. DD Not • Unrecognizable characters will be replaced with asterisks. 6.2.
7. BASIC PLAYBACK 7.1. Playing back a disc [BD Video] [DVD Video] [CD] [AVCHD] [JPEG] 1. Insert a disc (refer to ˝How to insert a disc˝ on page 19). • For Blu-ray Disc™ / DVD / audio CD or a disc containing only one type of file, playback will start automatically. If not, press [ (PLAY/PAUSE)]. • Some discs may show a Title or a Disc Menu. In this case, refer to ˝Using the title / disc / pop menu˝ on page 22. 2. Select the type of the file you want to play back, then press [OK].
DD Not for JPEG playback Every press of [ ] will turn the image by 90 degrees when an image is displayed. During playback, press [TOP MENU] to display thumbnail screen. Some unplayable folders or files may be listed due to the recording status. High-resolution JPEG files take longer to be displayed. Progressive JPEG files (JPEG files saved in progressive format) cannot be played back on this unit. • • • • • 7.2.
7.3. Using the title / disc / pop menu [BD Video] [DVD Video] [AVCHD] Some BD-videos, DVD-videos or AVCHD files may contain a title menu which describes the contents of the disc, or a Disc Menu which guides you through the available functions on the disc. • With such discs, a title menu or a disc menu may appear automatically when you insert the disc. Otherwise, press [TOP MENU] or [POP MENU] to call up the menu select menu. Use [ ] to select ˝Top Menu˝ or ˝Pop-up Menu/ Menu˝, then press [OK].
8. SPECIAL PLAYBACK 8.1. Fast forward / Fast reverse [BD Video] [DVD Video] [CD] [AVCHD] 1. During playback, press [ (FORWARD)] repeatedly for fast forward. During playback, press [ 2. Press [ (REVERSE)] repeatedly for fast reverse. (PLAY/PAUSE)] to return to normal playback. DD Not • • • For Blu-ray Disc™, DVD and AVCHD, speed changes at 5 different levels. For audio CD, speed changes at 3 different levels.
8.4. Repeat playback Available repeat functions vary depending on the disc. 1. During playback, press [OPTIONS] to display the play menu. 2. Use [ ] to select ˝Repeat˝ then press [OK]. 3. Use [ ] to select the desired repeat mode. REPEAT MODE Chapter repeat The current Chapter will be played back repeatedly. Title repeat The current title will be played back repeatedly. Track repeat The current track or file will be played back repeatedly.
8.6. PiP (BONUSVIEW™) setting [BD Video] Some BD-videos have the PiP function which enables you to display the secondary video in the primary video. Primary video Secondary video 1 / 2 MPEG 1. During playback, press [OPTIONS] to display the play menu. 2. Use [ ] to select ˝PiP˝ then press [OK]. • PiP information will appear. 3. Use [ ] to select the secondary video you want to show. • The secondary video will be displayed with secondary audio. • Use [ ] to switch between current setting and ˝Off˝.
8.7. Title / chapter search [BD Video] [DVD Video] CC Using [ [AVCHD] (SKIP)] / [ (SKIP)] 1. During playback, press [ (SKIP)] to skip the current title or chapter and move to the next. The title or chapter will move forward one at a time. • If there is no chapter in a title, the current title may be skipped. To go back to the beginning of the current title or chapter, press [ (SKIP)]. Press [ (SKIP)] repeatedly to go to the previous title or chapter.
8.9. Time search [BD Video] [DVD Video] [CD] [AVCHD] 1. During playback, press [OPTIONS] to display the play menu. 2. Use [ ] to select ˝Search˝, then press [OK]. 3. Use [ ] to select ˝Time˝, then press [OK]. e.g.) Blu-ray Disc™ Time 00:00:00/02:03:45 4. Enter the time count you want to jump to. • Use [ ] to enter the first digit of the time counter, then press [ • When the last digit is entered, press [OK]. Playback will start from the desired time entered. ]. 8.10.
8.11. Switching subtitles Some video materials may have subtitles in one or more languages. For commercially available discs, the supported languages can be found on the disc case. Follow the steps below to switch the subtitle language during playback. [BD Video] CC Using [SUBTITLE] CC Using [OPTIONS] 1. During playback, press [SUBTITLE]. 1. During playback, press [OPTIONS] to display the • Pressing [SUBTITLE] repeatedly switches the subtitle. play menu. 2.
8.12. Switching audio soundtrack When playing back video material recorded with two or more soundtracks (these are often in different audio languages or audio formats), you can switch between them during playback. For Blu-ray Disc™, available audio varies depending on ˝Blu-ray Disc Audio˝ setting. Refer to page 31. [BD Video] CC Using [AUDIO] CC Using [OPTIONS] 1. During playback, press [AUDIO]. 1. During playback, press [OPTIONS] to display the play menu.
8.13. Switching camera angles [BD Video] [DVD Video] Some BD-videos and DVD-videos contain scenes which have been shot simultaneously from various angles. You can change the camera angle when appears on the TV screen. 1. During playback, press [OPTIONS] to display the play menu. 2. Use [ ] to select “Angle”, then press [OK]. 3. Use [ ] to select your desired angle. • The selected angle will be displayed on the display bar at the top of the TV screen. 4. Press [BACK] to Exit.
9. LIST OF SETTINGS In ˝Setup˝, you can customize various kinds of settings as you prefer. Refer to the following instructions to navigate through the setup menu. 1. Press [ (HOME)] to access the home menu. 2. Use [ ] to select ˝Setup˝, then press [OK]. 3. Use [ ] to select the desired category, then press [OK]. 4. Use [ ] to move up and down the list to select menus / options. 5. To make a selection or to access options of an item, select the desired item, then press [OK].
Category Preference Setup Audio Subtitle Disc Menu Parental Control Change Password Screen Saver Angle Icon Advanced Setup Software Update Quick Start Mode Version Info Restore default settings Menus / Options Original Bulgarian Chinese Czech Danish Dutch English Finnish French German Greek Hungarian Icelandic Irish Off Bulgarian Chinese Czech Danish Dutch English Finnish French German Greek Hungarian Icelandic Irish Bulgarian Chinese Czech Danish Dutch English Finnish French German Greek Hungarian I
10. SETUPS 10.1. EasyLink (HDMI CEC) HOME A ˝Setup˝ A ˝EasyLink Setup˝ ˝EasyLink˝ A EasyLink(HDMI CEC) allows integrated system control over HDMI and is part of the HDMI standard. This function may not work properly depending on the device connected to the unit. When ˝EasyLink˝ setting is set to ˝On˝ the functions listed below will be available.
10.2. HDMI video resolution HOME A ˝Setup˝ A ˝Video Setup˝ ˝HDMI Video˝ A Set the resolution of the video signal being output from the HDMI OUT jack. You can select the desired video resolution among the settings listed below: ˝Auto˝, ˝480p˝, ˝720p˝, ˝1080i˝, ˝1080p˝, ˝1080p24˝.
10.3. Parental control Some BD-videos or DVD-videos feature parental lock levels. Playback will stop if the ratings of the content exceed the levels you set on the player, it will require you to enter a password before the disc will play back. This feature prevents your children from viewing inappropriate material. 1. Enter your 4-digit password. • Use [ ] to enter the first digit of your password, then press [ • When 4-digit numbers are entered, press [OK]. ].
10.4. Software update HOME A “Setup” A “Advanced Setup” “Software Update” A This unit lets you update the software yourself using a software update disc or USB memory stick. The available discs are below: • BD-RE/-R • DVD-RW/-R • CD-RW/-R CC Disc / USB memory stick update You can update the software by using a disc or USB memory stick. Prepare a blank disc or USB memory stick for software update: Navigate to www.philips.
10.5. Voice Guide HOME A “Setup” A “Audio Setup” “Voice Guide” A Menu to set the Voice guide function to “On” or “Off”. 1. Use [ ] to select “Setup” in the home menu, then press [OK]. 2. Use [ ] to select “Audio Setup”, then press [OK]. 3. Use [ ] to select “Voice Guide”, then press [OK]. 4. Use [ ] to select “On” or ˝Off”, then press [OK]. (HOME)] to exit. 5. Press [ DD Not • • • • In order to enable the voice guide function, the OSD language needs to be set to English or Spanish.
11. TROUBLESHOOTING Problems No power. No sound or picture. No reaction to the remote control. No Audio / Video signal on the display device via HDMI cable. No high-definition video signal on the TV screen. Distorted picture. Completely distorted picture or black / white picture with Blu-ray Disc™ / DVD. No sound or distorted sound. Picture freezes momentarily during disc playback. Cannot play back a disc. T ips Check the AC power cord, if it is properly connected. Try another power outlet.
Problems No return to start-up screen when disc is removed. will appear on the TV screen. Buttons do not work or the unit stops responding. The unit does not respond to some operating commands during playback. The unit cannot read Blu-ray Disc™ / DVD/ CD. T ips Soft reset this unit by turning it off for 30 seconds, then on again.
Problems Cannot find a JPEG file. No Audio signal from Surround system of the audio system. T ips Make sure that the selected group (folder) does not contain more than 9,999 files for Blu-ray Disc™ / DVD / USB memory stick and 999 files for CD. Make sure that the file extension is .jpg / .JPG / .jpeg / or .JPEG. Make sure the audio system is turned on. Check the input mode on the audio system if it is on the correct channel. Check if the surround system is compatible with either bitstream or LPCM.
12.
13. SPECIFICATIONS Signal system Power requirements Power consumption Dimensions (width x height x depth) Weight Operating temperature Operating humidity General NTSC Color 120 V AC, 60 Hz 16 W (standby: 0.5 W) 11.1 x 1.7 x 8.3 inches (280.0 x 41.0 x 201.0 mm) 1.0 kg (2.21 lbs.
14. MAINTENANCE CC Servicing • • Please refer to relevant topics in ˝TROUBLESHOOTING˝ on page 38 before returning the product. If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Eject the disc (if possible), disconnect the USB memory stick (if connected to the unit), place the unit into Standby mode, unplug the AC power plug, and please contact: 1-866-515-1124 or visit : www.philips.
15. TRADEMARK INFORMATION ˝Blu-ray Disc™˝, ˝Blu-ray˝ and ˝Blu-ray Disc™˝ logo are trademarks of the Blu-ray Disc Association. is a trademark of DVD Format/Logo Licensing Corporation. ˝BONUSVIEW™˝ and ˝BONUSVIEW™˝ logo are trademarks of the Blu-ray Disc Association. ˝AVCHD˝ and the ˝AVCHD˝ logo are trademarks of Panasonic Corporation and Sony Corporation.
16. GLOSSARY AACS Digital audio Advanced Access Content System (AACS) is the content protection scheme used with Blu-ray™ discs. An indirect representation of sound by numbers. During recording, the sound is measured at discrete intervals (44,100 times a second for CD audio) by an analogto-digital converter, generating a stream of numbers. On playback, a digital-to-analog converter generates an analog signal based on these numbers. See also ˝Sampling frequency˝ and ˝Analog audio˝.
PCM (Pulse Code Modulation) The most common system of encoding digital audio, found on CD and DAT. Excellent quality, but requires a lot of data compared to formats such as Dolby Digital and MPEG audio. For compatibility with digital audio recorders (CD, MD and DAT) and AV amplifiers with digital Inputs, this unit can convert Dolby Digital, DTS, and MPEG audio to PCM. See also ˝Digital audio˝. Region code Regions associate discs and players with particular areas of the world.
NINETY (90) DAY LIMITED WARRANTY WARRANTY COVERAGE: This warranty obligation is limited to the terms as set forth below. WHO IS COVERED: This product is warranted to the original purchaser or the person receiving the product as a gift against defects in materials and workmanship as based on the date of original purchase (“Warranty Period”) from an Authorized Dealer. The original sales receipt showing the product name and the purchase date from an authorized retailer is considered such proof.
P&F USA, Inc. 1880 Braselton Hwy, Suite 118 #5012 Lawrenceville, GA 30043 P&F Mexicana, S.A. de C.V. Av. La Palma No. 6, Col. San Fernando La Herradura. Huixquilucan, Edo. de México. C.P. 52787 This product has been manufactured by and is sold under the responsibility of P&F USA, Inc., and P&F USA, Inc. is the warrantor in relation to this product. The Philips trademark and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. used under license.