User Manual

Philips Consumer Lifestyle

Firmware Upgrade

We have developed a firmware upgrade to improve your product.

This upgrade is applicable for the following models:

BDP7100/12

This firmware version improves: Click here for more details

Note: Before you proceed to upgrade, please be reminded that you need to do configuration again

each time after firmware upgrade!

Upgrade Procedure

Check your current version

First check your current firmware version to see if you need to upgrade:

1. Press OPEN/CLOSE button to open the disc tray.

2. Press and hold the INFO button.

3. The firmware version will be displayed on the TV screen.

4. If your existing firmware version is earlier than this version, [100422], please proceed to step 2

Otherwise, you do not need to upgrade.

Download firmware upgrade

Click the link to download the new firmware package on your computer. The package is compressed

into a single ZIP archive.

Burning the firmware on CD-R

Note:

- You will need one blank CD-R disc for this step.

- Do not burn the firmware on CD-RW, Firmware Upgrade not supported on CD-

RW.

1. Extract the firmware upgrade file from the ZIP archive. (Do not rename the filenames)

Burn the extracted file (NOT THE ZIP FILE) onto blank CD-R disc, using the following

settings:

- File System: ISO 9660 + Joliet

- Mode: 2/XA

- Character set: ISO 9660 (ISO normal CD-ROM)

- No multi session

- Write Speed: Low

Note: ZIP file will not be readable on the set

2. Finalize the discs. (The application may do this automatically.)

Step 1

Step 2

Step 3

BDP7100 Firmware Upgrade

PAGE 1
Philips Consumer Lifestyle BDP7100 Firmware Upgrade Firmware Upgrade We have developed a firmware upgrade to improve your product.
PAGE 2
Philips Consumer Lifestyle Step 4 Upgrading the firmware of your BD player Note: - Do not press any buttons or interrupt the mains supply during the upgrading process, otherwise the player may become defective. - Do not unplug or power off the set while upgrading in progress. Press OPEN/CLOSE button to open the disc tray. Insert the upgrade CD. Press OPEN/CLOSE button to close the disc tray. Please wait about 6 minutes while verifying. Check the date of the Firmware version. a.