User manual
8
Tip
If the TV has a DVI connector only, connect via an •
HDMI/DVI adaptor. Connect an audio cable for sound
output.
If there is a blank TV screen under HDMI connection,
•
on the remote control press and then press “731”
(numeric buttons) to recover picture display.
If this player connects to a TV compatible with 1080p
•
or 1080p/24Hz, Philips recommends HDMI category
2 cable, also known as High Speed HDMI cable, for
optimal video and audio output.
To play the digital video images of a BD-video or DVD-
•
video via an HDMI connection, it is necessary that both this
player and the display device (or an AV receiver/amplifier)
support a copyright protection system called HDCP (high-
bandwidth digital content protection system).
This connection provides the best picture quality.
•
Option 2: Connect to the component
video jacks
1 Connect the component video cables (not
supplied) to:
the • Y Pb/Cb Pr/Cr jacks on this player.
the COMPONENT VIDEO input jacks •
on the TV.
2 Connect the audio cables (not supplied) to:
the • Audio LINE OUT -L/R jacks on this
player.
the AUDIO input jacks on the TV.•
Tip
The component video input jack on the TV might be •
labeled as Y Pb Pr or YUV.
Pb
Y
Pr
AUDIO IN
3 Connect
Make the following connections to use this player.
Basic connections:
Video•
Audio•
Power•
Optional connections:
Route audio to other devices•
HDMI-compliant AV receiver/amplifier•
Multi-channel AV amplifier/receiver•
Digital AV amplifier/receiver•
Analog stereo system•
USB device•
Wired/Wireless network•
Note
Refer to the type plate at the back or bottom of the •
product for identification and supply ratings.
Before you make or change any connections, ensure that
•
all the devices are disconnected from the power outlet.
Connect video/audio cables
Select the best video connection that the TV can
support.
• Option 1: Connect to the HDMI jack (for a
HDMI, DVI or HDCP-compliant TV).
• Option 2: Connect to the component video
jacks (for a standard TV or Progressive Scan
TV).
• Option 3: Connect to the composite video
jack (for a standard TV).
Option 1: Connect to the HDMI jack
1 Connect an HDMI cable (not supplied) to:
the • HDMI jack on this player.
the HDMI input jack on the TV. •
HDMI IN
EN