DISCRETE SEMICONDUCTORS DATA SHEET book, halfpage MBD128 BGA2711 MMIC wideband amplifier Product specification Supersedes data of 2001 Apr 04 2001 Oct 19
Philips Semiconductors Product specification MMIC wideband amplifier BGA2711 FEATURES PINNING • Internally matched to 50 Ω PIN • Very wide frequency range DESCRIPTION 1 • Very flat gain • Unconditionally stable. APPLICATIONS VS 2, 5 GND2 3 RF out 4 GND1 6 RF in • Cable systems • LNB IF amplifiers 6 • General purpose 5 4 1 • ISM.
Philips Semiconductors Product specification MMIC wideband amplifier BGA2711 LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134) SYMBOL PARAMETER VS DC supply voltage IS supply current CONDITIONS MIN. RF input AC coupled Ts ≤ 80 °C MAX.
Philips Semiconductors Product specification MMIC wideband amplifier BGA2711 APPLICATION INFORMATION Figure 2 shows a typical application circuit for the BGA2711 MMIC. The device is internally matched to 50 Ω, and therefore does not need any external matching. The value of the input and output DC blocking capacitors C2, C3 should be not more than 100 pF for applications above 100 MHz. However, when the device is operated below 100 MHz, the capacitor value should be increased.
Philips Semiconductors Product specification MMIC wideband amplifier BGA2711 90° handbook, full pagewidth 1.0 +1 135° 0.8 45° +2 +0.5 0.6 +0.2 0.4 +5 0.2 180° 0.2 0 1 100 MHz 2 0.5 5 0° 0 3 GHz −5 −0.2 −0.5 −2 −135° −45° −1 MGU441 1.0 −90° IS = 12.6 mA; VS = 5 V; PD = −30 dBm; ZO = 50 Ω. Fig.7 Input reflection coefficient (s11); typical values. 90° handbook, full pagewidth 1.0 +1 135° 0.8 45° +2 +0.5 0.6 +0.2 0.4 +5 0.2 180° 0.2 0 0.
Philips Semiconductors Product specification MMIC wideband amplifier BGA2711 MGU443 0 MGU444 20 handbook, halfpage handbook, halfpage s12 2 (dB) s21 2 (dB) −20 15 −40 10 −60 5 −80 0 0 1000 2000 0 3000 1000 2000 f (MHz) IS = 12.6 mA; VS = 5 V; PD = −30 dBm; ZO = 50 Ω. Fig.9 IS = 12.6 mA; VS = 5 V; PD = −30 dBm; ZO = 50 Ω. Isolation (|s12|2) as a function of frequency; typical values. Fig.10 Insertion gain (|s21|2) as a function of frequency; typical values.
Philips Semiconductors Product specification MMIC wideband amplifier BGA2711 MGU447 10 MGU448 5 handbook, halfpage handbook, halfpage NF (dB) K 8 4 6 3 4 2 2 1 0 0 0 1000 2000 f (MHz) 3000 0 1000 2000 f (MHz) 3000 IS = 12.6 mA; VS = 5 V; ZO = 50 Ω. IS = 12.6 mA; VS = 5 V; ZO = 50 Ω. Fig.13 Noise figure as a function of frequency; typical values. Fig.14 Stability factor as a function of frequency; typical values. Scattering parameters: IS = 12.
Philips Semiconductors Product specification MMIC wideband amplifier BGA2711 PACKAGE OUTLINE Plastic surface mounted package; 6 leads SOT363 D E B y X A HE 6 v M A 4 5 Q pin 1 index A A1 1 2 e1 3 bp c Lp w M B e detail X 0 1 2 mm scale DIMENSIONS (mm are the original dimensions) UNIT A A1 max bp c D E e e1 HE Lp Q v w y mm 1.1 0.8 0.1 0.30 0.20 0.25 0.10 2.2 1.8 1.35 1.15 1.3 0.65 2.2 2.0 0.45 0.15 0.25 0.15 0.2 0.2 0.
Philips Semiconductors Product specification MMIC wideband amplifier BGA2711 DATA SHEET STATUS DATA SHEET STATUS(1) PRODUCT STATUS(2) DEFINITIONS Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. Preliminary data Qualification This data sheet contains data from the preliminary specification.
Philips Semiconductors Product specification MMIC wideband amplifier BGA2711 NOTES 2001 Oct 19 10
Philips Semiconductors Product specification MMIC wideband amplifier BGA2711 NOTES 2001 Oct 19 11
Philips Semiconductors – a worldwide company Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com. SCA73 © Koninklijke Philips Electronics N.V. 2001 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.