DISCRETE SEMICONDUCTORS DATA SHEET handbook, halfpage M3D167 BGY2016 UHF amplifier module Product specification Supersedes data of 2000 Jan 04 2000 Oct 17
Philips Semiconductors Product specification UHF amplifier module BGY2016 FEATURES PINNING - SOT365A • 26 V nominal supply voltage PIN • 16 W output power into a load of 50 Ω with an RF drive power of ≤20 mW. APPLICATIONS • Base station transmitting equipment operating in the 1805 to 1990 MHz frequency band. DESCRIPTION 1 RF input 2 VS1 3 VS2 4 RF output Flange ground DESCRIPTION The BGY2016 is a three-stage UHF amplifier module in a SOT365A package with a plastic cap.
Philips Semiconductors Product specification UHF amplifier module BGY2016 CHARACTERISTICS Tmb = 25 °C; VS1 = 5 V; VS2 = 26 V; PL = 16 W; ZS = ZL = 50 Ω unless otherwise specified. SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX.
Philips Semiconductors Product specification UHF amplifier module BGY2016 APPLICATION INFORMATION handbook, full pagewidth Z1 C7 C8 C5 C6 R1 L1 R2 C3 C4 C1 C2 50 Ω input VS1 Z2 L2 50 Ω output VS2 MGM861 Fig.2 Test circuit. List of components (See Figs 2 and 3) COMPONENT DESCRIPTION VALUE CATALOGUE NO.
Philips Semiconductors Product specification UHF amplifier module BGY2016 90 handbook, full pagewidth 42 C7 C8 C6 C5 R1 Z2 L1 L2 C3 C4 C1 C2 output VS1 R2 Z1 VS2 input Dimensions in mm. Fig.3 Printed-circuit board component layout.
Philips Semiconductors Product specification UHF amplifier module BGY2016 MOUNTING RECOMMENDATIONS The module should be mounted to the heatsink using 3 mm bolts with flat washers. The bolts should first be tightened to “finger tight” and then further tightened in alternating steps to a maximum torque of 0.4 to 0.6 Nm. To ensure a good thermal contact and to prevent mechanical stress when bolted down, the flatness of the mounting base is designed to be typically better than 0.1 mm.
Philips Semiconductors Product specification UHF amplifier module BGY2016 PACKAGE OUTLINE Plastic rectangular single-ended flat package; flange mounted; 2 mounting holes; 4 in-line leads SOT365A D A F y U q A U2 p E U1 L 1 2 3 4 bp e1 e w M e c v A Z 0 Q 10 20 mm scale DIMENSIONS (mm are the original dimensions) UNIT A bp c D E mm 9.5 9.0 0.56 0.46 0.3 0.2 30.1 29.9 18.6 18.4 OUTLINE VERSION e e1 2.54 17.78 F L p Q 3.25 3.15 6.5 6.1 4.1 3.9 4.0 3.
Philips Semiconductors Product specification UHF amplifier module BGY2016 DATA SHEET STATUS DATA SHEET STATUS PRODUCT STATUS DEFINITIONS (1) Objective specification Development This data sheet contains the design target or goal specifications for product development. Specification may change in any manner without notice. Preliminary specification Qualification This data sheet contains preliminary data, and supplementary data will be published at a later date.
Philips Semiconductors Product specification UHF amplifier module BGY2016 NOTES 2000 Oct 17 9
Philips Semiconductors Product specification UHF amplifier module BGY2016 NOTES 2000 Oct 17 10
Philips Semiconductors Product specification UHF amplifier module BGY2016 NOTES 2000 Oct 17 11
Philips Semiconductors – a worldwide company Argentina: see South America Australia: 3 Figtree Drive, HOMEBUSH, NSW 2140, Tel. +61 2 9704 8141, Fax. +61 2 9704 8139 Austria: Computerstr. 6, A-1101 WIEN, P.O. Box 213, Tel. +43 1 60 101 1248, Fax. +43 1 60 101 1210 Belarus: Hotel Minsk Business Center, Bld. 3, r. 1211, Volodarski Str. 6, 220050 MINSK, Tel. +375 172 20 0733, Fax. +375 172 20 0773 Belgium: see The Netherlands Brazil: see South America Bulgaria: Philips Bulgaria Ltd.