Always there to help you Register your product and get support at www.philips.
Philips Consumer Lifestyle B.V. AQ95-56F-1313KR/2nd 2011 ........................................................ (Document No. / Numéro du document) ........................................................................... (Year, Month (yyyy/mm) in which the CE mark is affixed / Année/mois (aaaa/mm) au cours de laquelle le marquage CE a été apposé) EUROPEAN DECLARATION OF CONFORMITY (DECLARATION DE CONFORMITE CE) We / Nous, PHILIPS CONSUMER LIFESTYLE B.V.
Contents 1 Important Hearing Safety Electric-, Magnetic- and Electromagnetic Fields (EMF) General information Disposal of your old product Remove the integrated battery Notice for the European Union Trademarks 2 Your bluetooth stereo headset Introduction What's in the box What else you'll need Compatibility Overview of your Bluetooth stereo headset 2 2 2 2 3 3 3 3 4 4 4 4 4 The headset is connected to a Bluetooth stereo enabled mobile phone, but music will play on the mobile phone's speaker only.
1 Important Hearing Safety Danger •• To avoid hearing damage, limit the time you use the headphones at high volume and set the volume to a safe level. The louder the volume, the shorter is the safe listening time. Be sure to observe the following guidelines when using your headphones. • Listen at reasonable volumes for reasonable periods of time. • Be careful not to adjust the volume continuously upwards as your hearing adapts. • Do not turn up the volume so high that you can’t hear what’s around you.
Disposal of your old product Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste.
2 Your bluetooth stereo headset Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.
(A2DP) and Audio/Video Remote Control profile (AVRCP).
3 Get started Charge the headset Warning •• Before you use your headset for the first time, charge the battery for four hours for optimum battery capacity and lifetime. •• Use only the original USB charging cable to avoid any damage. •• Finish your call before charging the headset, as connecting the headset for charging will power off the unit. •• You can operate the headset normally during charging. Plug the headset into a powered USB port with an USB charging cable.
4 Use the headset Connect the headset to a mobile phone 1 2 Use your headset Task Operation Sound or LED Indicator Turn the headset on. Press and hold for more than 4 seconds 1 short beep - 3 white flashes: Battery low < 25% - 2 white flashes: Battery level < 50% - 1 blue flash: Battery level > 50% Turn the headset off. Press and - 1 long beep hold for - 1 long white more than 4 flash seconds Play or pause music. Press 1 short beep Pick up or terminate a call.
Adjust volume. Slide up/ down VOL +/- 1 short beep Skip forward. Press 1 short beep Skip backward. Press 1 short beep Mute/ Press unmute the microphone in a call. 1 short beep / 2 short beeps Activate voice dialing 2 short beeps before dial tone twice The microphone is muted. Wear your headset Adjust the headband for the best fit. twice Press The headset beeps every 5 seconds. Note •• Available if supported by your mobile phone.
EN 9
5 Technical data • • • • Up to 9 hours of play time or talk time Up to 200 hours of standby time Normal time for a full charge: 3 hours Rechargeable Lithium-Polymer battery (230 mAh) • 3.5 mm audio socket for corded headset mode • Bluetooth 2.
6 Frequently asked questions Bluetooth headset does not switch on. Battery is low. • Charge the headset. The audio cable is connected to the headset. • Disconnect the audio cable. Pairings may have been reset or headset has been previously paired with other device. • Pair the headset with the mobile phone again as described in the user manual. Voice dialing or redialing does not work. Your mobile phone may not support this feature. The other side cannot hear me. Fail to pair with a mobile phone.
Audio quality is poor when streaming from the mobile phone is very slow, or audio streaming does not work at all. The mobile phone may only support (mono) HSP/HFP but not support A2DP. • Refer to the user manual of the mobile phone for detailed information on compatibility. I hear but cannot control music on my device (e.g. skip forward/backward). The Bluetooth audio source does not support AVRCP. • Refer to the user manual of the audio source for detailed information on compatibility.
Specifications are subject to change without notice © 2013 Koninklijke Philips Electronics N.V. All rights reserved. SHB9100_UM_00_EN_2.