User manual
11EN
To enjoy music through the speaker wirelessly,
you need to pair your Bluetooth enabled device
with the unit.
1 Press /PAIRING to select the Bluetooth
source.
» [BT] (Bluetooth) is displayed.
» The Bluetooth indicator ashes blue.
2 On your device that supports Advanced
Audio Distribution Prole (A2DP), enable
Bluetooth and search for Bluetooth devices
that can be paired (refer to the user
manual of the device).
3 Select 'Philips BM60 xxx' on your
Bluetooth enabled device and if necessary
input '0000' as the pairing password.
» After successful pairing and connection,
the Bluetooth indicator turns solid
blue, and the unit beeps.
» 'BT' is displayed.
4 Play music on the connected device.
» Music streams from your Bluetooth
enabled device to this unit.
• If you fail to search for 'Philips BM60
xxx' or cannot pair with this unit,
press and hold
/PAIRING for three
seconds until you hear a beep sound
to enter pairing mode.
Philips BM60 xxx
To disconnect the current Bluetooth-enabled
device:
• Deactivate Bluetooth on your device.
Listen to the radio
Tip
•
Position the antenna as far as possible from TV or other
radiation sources.
• Make sure that you have connected the supplied FM
antenna.
• For optimal reception, fully extend and adjust the
position of the antenna.
Tune to a radio station
1 Press FM/AUDIO IN repeatedly to select
the tuner source.
2 Press and hold / for three seconds.
» The radio tunes to a station with
strong reception automatically.
3 Repeat step 2 to tune to additional
stations.
To ne tune a weak station:
• Press
/ repeatedly until you nd
optimal reception.