Always there to help you Register your product and get support at www.philips.
Contents 1 Important 2 2 3 2 Your portable speaker 5 5 5 6 3 Get started 7 7 8 Safety Notice Introduction What's in the box Overview of the speaker Charge the built-in battery Select a source or turn off 4 Use Bluetooth devices 9 9 10 11 5 Listen to an external device 12 6 Product information 13 13 13 13 7 Troubleshooting 14 14 15 Connect a device Play audio via Bluetooth Make a call Amplifier Bluetooth General information General About Bluetooth device EN 1
1 Important Safety Important Safety Instructions • • • • • • • • • • Heed all warnings. Follow all instructions. Do not use this apparatus near water. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat. Only use attachments/accessories specified by the manufacturer. Refer all servicing to qualified service personnel.
Notice Any changes or modifications made to this device that are not expressly approved by WOOX Innovations may void the user’s authority to operate the equipment. This product complies with the radio interference requirements of the European Community. Hereby, WOOX Innovations declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. You can find the Declaration of Conformity on www.philips.com/support.
Always bring your product to a professional to remove the built-in battery. Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company.
2 Your portable speaker Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With this speaker, you can • listen to audio from an external device via Bluetooth connection, • listen to audio from an external device through the AUX socket, and • make phone calls.
Overview of the speaker f a e d b c a Battery/Bluetooth indicator • Lights up, flashes or turns off depending on the status of BT100. • For details, see the following section Charging indicator and Bluetooth indicator. b Integrated microphone c • • • • • Press to answer an incoming call. Press to end the current call. Press and hold for 3s to reject an incoming call. Press and hold for 3s to change call between BT100 and mobile phone.
3 Get started Always follow the instructions in this chapter in sequence. Charge the built-in battery BT100 is powered by a built-in rechargeable battery. Note •• Before use, fully charge the built-in battery. X F AU OF Connect the USB cable between • • the DC IN socket on the speaker, and a USB socket of a computer.
Charging indicator In Bluetooth mode In AUX IN mode In OFF mode Indicator Flashing blue/Solid blue (depending on the working status) Flashing blue/Solid blue (depending on the working status) Flashing white Solid white Flashing white OFF Battery Under charging Fully charged Under charging Fully charged Under charging Fully charged Note •• In Bluetooth mode, when the battery is empty, BT100 turns off automatically. And the Bluetooth indicator flashes white while recharging.
4 Use Bluetooth devices With this speaker, you can listen to audio from a player and make a call through Bluetooth. Note •• •• •• •• •• •• •• Make sure that no audio input cable is connected to the AUX socket. Philips does not guarantee the compatibility with all Bluetooth devices. Before pairing a device with this system, read its user manual for Bluetooth compatibility. The product can memorize a maximum of 8 paired devices.
Disconnect a device • • On your device, disable the Bluetooth connection with BT100. Or, on BT100, press and hold when it is not during a call. Note •• Before connecting another Bluetooth device, disconnect the current device first. Reconnect a device • • For a paired Bluetooth device on which the automatic reconnection is enabled, this product reconnects with it once it is detected. For a paired Bluetooth device that does not support the automatic reconnection, reconnect it with this product manually.
Make a call Button functions in Bluetooth mode Buttons Status Functions Incoming call Press to answer an incoming call. Press and hold for more than 3 seconds to reject an incoming call. Press to end the current call. Press and hold for more than 3 seconds to transfer call between BT100 and the mobile phone.
5 Listen to an external device You can also listen to an external audio device, for example, MP3 player, through BT100. 1 X AU OFF 2 F X AU OF 1 2 3 12 Connect an audio input cable with a 3.5 mm connector on both ends to • the AUX socket on this product, and • the headphone socket on the external device. Switch the slider to the AUX position. Play audio on the external device (refer to its user manual).
6 Product information Note •• Product information is subject to change without prior notice. Amplifier Rated Output Power Signal to Noise Ratio Aux-in Link 2W RMS >70dB 300 mV RMS, 10 kohm Bluetooth Bluetooth specification Supported Profiles V3.0 +EDR HFPv1.5, AD2Pv1.
7 Troubleshooting Warning •• Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www.philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available. General No power • Recharge your speaker.
About Bluetooth device The audio quality is poor after connection with a Bluetooth-enabled device. •• The Bluetooth reception is poor. Move the device closer to this product or remove any obstacle between them. Cannot connect with the device. •• The Bluetooth function of the device is not enabled. Refer to the user manual of the device for how to enable the function. •• This product is already connected with another Bluetooth-enabled device. Disconnect that device and then try again.
Specifications are subject to change without notice 2014 © WOOX Innovations Limited. All rights reserved.Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V. BT100_00_UM_V2.