User manual Portable speaker BT150 Register your product and get support at www.philips.
Contents 1 Important Safety Notice 1 1 1 2 Your Bluetooth speaker Introduction What's in the box Overview of the speaker 2 2 3 3 3 4 4 6 Get started Charge the built-in battery Turn on/off 4 Play from Bluetooth devices Connect a Bluetooth device Play from a connected Bluetooth device Disconnect a device Reconnect a device Clear pairing information Control your phone call 6 6 7 7 7 7 8 5 Other features Listen to an external device Turn on / off the light Adjust volume 8 8 9 9 6 Specifications
1 Important Safety Warning • N ever remove the casing of this speaker. • Never place this speaker on other electrical equipment. • Keep this speaker away from direct sunlight, naked flames or heat • • • • • Only use attachments or accessories specified by the manufacturer. The battery shall not be exposed to excessive heat such as sunshine, fire or like Do not place any sources of danger on the speaker (e.g. lighted candles).
Inform yourself about the local separate collection system for electrical and electronic products and rechargeable batteries. Follow local rules and never dispose of the product and rechargeable batteries with normal household waste. Correct disposal of old products and rechargeable batteries helps prevent negative consequences for the environment and human health.
What's in the box Overview of the speaker Check and identify the contents of your package: 5 Portable speaker 4 2 3 1 Quick Start Guide BT150 Register your product and get support at www.philips.com/support • • • . Speaker USB cable for charging Printed materials 7 6 1 • Turn the speaker on or off. 2 + • Adjust volume. • In Bluetooth mode, press twice to play the next track. 3 • • Adjust volume. In Bluetooth mode, press twice to play the previons track.
5 • • • Enter Bluetooth pairing mode. Clear Bluetooth pairing information. Turn the light on/off • Charge the built-in battery. 6 7 AUDIO IN • Connect an external audio device. 3 Get started Always follow the instructions in this chapter in sequence. Charge the built-in battery The speaker is powered by a built-in rechargeable battery. Note • • • efore use, fully charge the built-in battery. B The micro USB socket is for charging only. Rechargeable battery has a limited number of charge cycles.
Charge the built-in battery Note • It takes you approximately 3 hours to fully charge the battery. he micro USB socket is for charging only. • T • Rechargeable battery has a limited number of charge cycles. Battery life and number of charge cycles vary by use and settings. When the battery level is low, LED flashes red. To charge the built-in battery: • EN Connect the speaker to AC power by using the adaptor (not supplied).
4 Play from Bluetooth devices Turn on/off 2 sec. • • To turn the speaker on, press and hold for over two seconds until the LEDs light up. To turn the speaker off, press and hold for two seconds again. Note • The speaker turns off automatically when being idle With this speaker, you can listen to audio from Bluetooth-enabled devices and control the incoming call through Bluetooth.
2 On your Bluetooth device, enable Bluetooth and search for Bluetooth devices that can be paired (see the user manual of the device). 3 Select [Philips BT150] displayed on your device for pairing. If necessary, input “0000” as the pairing password. » After successful connection, the speaker beeps twice, and the blue LED light stops flashing. After successful Bluetooth connection, play audio on the connected device. » Audio streams from your Bluetooth device to the speaker.
Control your phone call After Bluetooth connection, you can control an incoming call with this speaker. Button 5 Other features Function Press to answer an incoming call. Press and hold for two seconds to reject an incoming call. During a call, press to end the current call. During a call, press and hold for two seconds to transfer the call to your mobile device. Listen to an external device With this speaker, you can also listen to an external audio device such as an MP3 player.
Turn on / off the light Adjust volume During music playback, you can enjoy the flashing light effect. During music playback, press -/+ to increase or decrease volume. Press to turn on / off the light Tip Note • I f bluetooth is connected, the light keeps on. • If bluetooth is connected, when no signal output, the light turn off. • If connect an audio cable, the light will keep on. EN 9 • You can press and hold -/+ to increase or decrease volume continuously.
6 Specifications Note 7 Troubleshooting • Product information is subject to change without prior notice. Warning • Never remove the casing of this device. Rated output power (Amplifier) 1x4W RMS ≤ 1% THD Acoustic frequency response 80-16000 Hz Speaker driver 1x1.5" full range, 4 Ω Bass enhancement 1 pcs of passive radiator Bluetooth version V4.2 + EDR Bluetooth supported profiles HFP V1.7, A2DP V1.3, AVRCP V1.6 To keep the warranty valid, never try to repair the system yourself.
About Bluetooth device The audio quality is poor after connection with a Bluetooth-enabled device. • The Bluetooth reception is poor. Move the device closer to this product or remove any obstacle between them. Fail to find [Philips BT150] on your device for pairing. • Press and hold for two seconds to enter pairing mode, and then try again. Cannot connect with the device. • • The Bluetooth function of the device is not enabled. Refer to the user manual of the device for how to enable the function.
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited or one of its affiliates, and MMD Hong Kong Holding Limited is the warrantor in relation to this product. BT150_00 _UM_V 1.
