User manual BT3900 Register your product and get support at www.philips.
Contents 1 Important Safety Notice 2 Your Bluetooth speaker Introduction What's in the box Overview of the speaker 3 Get started Turn on/off Check the battery level Charge the built-in battery 4 Play from Bluetooth devices Connect a Bluetooth device Play from a connected Bluetooth device Disconnect a device Reconnect a device Clear pairing information Control your phone call 5 Other features Listen to an external device Adjust volume Attach the lanyard cable 6 Specifications 7 Troubleshooting Genera
1 Important Safety Warning •• Never remove the casing of this speaker. •• Never place this speaker on other electrical equipment. •• Keep this speaker away from direct sunlight, naked flames or heat. • Only use attachments or accessories specified by the manufacturer. The battery shall not be exposed to excessive heat such as sunshine, fire or the like. Do not place any sources of danger on the speaker (e.g. lighted candles).
• • • Increase the separation between equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
regarding the disposal of packaging materials, exhausted batteries and old equipment. Trademark notice The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Gibson Innovations Limited is under license. Other trademarks and trade names are those of their respective owners. 2 Your Bluetooth speaker Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.
Overview of the speaker 3 Get started Always follow the instructions in this chapter in sequence. Turn on/off a • • • Turn the speaker on or off. Check the battery level. b -/+ • Adjust volume. c • • • d • • In Bluetooth mode, press to pause or resume play. In Bluetooth mode, press twice to play the next track. Respond to an incoming call through Bluetooth connection. Enter Bluetooth pairing mode. Clear Bluetooth pairing information. e Battery level indicators • Show the charging progress.
• To manually check the battery level, briefly press in either power-on or power-off mode. »» The different behavior of the four LEDs indicates different battery To charge the built-in battery: • Pull out the USB cable from the USB lanyard cable as illustrated. levels.
Check the charging progress During charging, you can press check the charging progress. Battery level <20% charged 20% - 50% charged 50% - 80% charged > 80% charged Fully charged to LED 1 LED 2 LED 3 LED 4 Flash Off white Solid Flash Off white white Solid white Flash Off white Solid white Solid white (turn off in 3 minutes) Flash white 4 Play from Bluetooth devices With this speaker, you can listen to audio from Bluetooth-enabled devices and control the incoming call through Bluetooth.
2 3 On your Bluetooth device, enable Bluetooth and search for Bluetooth devices that can be paired (see the user manual of the device). Select [Philips BT3900] displayed on your device for pairing. If necessary, input “0000” as the pairing password. »» After successful connection, the speaker beeps twice, and the LED turns solid blue. Tip •• You can also use your Bluetooth device to control play.
Button Function Press to answer an incoming call. Press and hold for two seconds to reject an incoming call. During a call, press to end the current call. During a call, press and hold for two seconds to transfer the call to your mobile device. 5 Other features Listen to an external device With this speaker, you can also listen to an external audio device such as an MP3 player. Note •• Make sure that music playback through Bluetooth is stopped. 1 2 Connect an audio input cable (not supplied) with a 3.
Adjust volume During music playback, press -/+ to increase or decrease volume. Tip •• You can press and hold -/+ to increase or 6 Specifications Note •• Product information is subject to change without prior notice. decrease volume continuously. •• When the volume reaches the maximum, the speaker beeps twice. Attach the lanyard cable For easy carrying, attach the supplied USB lanyard cable to this speaker as illustrated.
7 Trouble shooting •• If the issue remains, when the speaker is switched on, hold both the - and + keys at the same time for 7 seconds until the speaker is off. Then wait for the speaker to reset and switch on again automatically. Warning •• Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service.
2017 © Gibson Innovations Limited. All rights reserved. This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. BT3900_37_UM_V1.
