Always there to help you Register your product and get support at www.philips.
Contents 1 Important 2 2 Your Bluetooth speaker 3 3 3 4 3 Get started 5 5 5 5 4 Use Bluetooth devices 6 6 7 7 7 Introduction What's in the box Overview of the speaker Connect power Turn on Turn off Connect a device Play from Bluetooth device Control your phone call Disconnect the Bluetooth-enabled device Connect another Bluetooth-enabled device Reconnect the Bluetooth device 7 7 5 Other features 8 8 8 8 6 Product information 9 9 Listen to an external device Charge your mobile devices Adjust
1 Important Warning •• Never remove the casing of this speaker. •• Never lubricate any part of this speaker. •• Never place this speaker on other electrical equipment. •• Keep this speaker away from direct sunlight, naked flames or heat. •• Make sure that you always have easy access to the power cord, plug, or adaptor to disconnect the speaker from the power. • • • • • Make sure that there is enough free space around the speaker for ventilation. Use only power supplies listed in the user manual.
2 Your Bluetooth speaker Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With this speaker, you can • enjoy audio from your Bluetooth-enabled devices, or other external audio devices; and • charge your mobile devices.
Overview of the speaker d a b c g a • f Turn the speaker on or off. b +/• Adjust volume. c • • • • /PAIRING Answer or reject an incoming call. End the current phone call. Disconnect Bluetooth connection. Enter Bluetooth pairing mode. d NFC • Connect a device with NFC feature through Bluetooth. e AUDIO IN • Connect an external audio device. f CHARGING 5V 1A • Charge your mobile devices. g DC IN • Connect power.
3 Get started Always follow the instructions in this chapter in sequence. Connect power Turn off The speaker is turned off in the following situations: • Press again; or • The Bluetooth connection is disconnected and no audio-in cable is connected for 15 minutes. »» The LED indicator turns off. Caution •• Risk of product damage! Make sure that the power voltage corresponds to the voltage printed on the back or underside of the speaker. Connect the power adapter to: • the DC IN socket on the speaker.
4 Use Bluetooth devices With this speaker, you can listen to audio from Bluetooth-enabled devices and control the incoming call through Bluetooth. 4 Connect a device Note Follow the on-screen instructions to complete the pairing and connection. »» After successful connection, the speaker beeps twice, and the LED indicator turns solid blue. Option 2: Connect a device manually •• Make sure that your Bluetooth device is compatible Note with this speaker.
Play from Bluetooth devices Note •• If there is an incoming call on the connected mobile phone, music play pauses. After successful Bluetooth connection, play audio on the Bluetooth device. »» Audio streams from your Bluetooth device to the speaker. Connect another Bluetoothenabled device 1 2 Press and hold PAIRING for two seconds to disconnect the currently connected device; »» The speaker enters Bluetooth pairing mode. Connect another Bluetooth device.
5 Other features Listen to an external device With this speaker, you can also listen to an external audio device such as an MP3 player. Note •• Make sure that there is no Bluetooth connection, or music playback through Bluetooth is paused. 1 2 Charge your mobile devices You can charge your mobile devices through the USB socket. Note •• The USB socket is for charging only. 1 2 Connect this speaker to AC power. Connect this speaker to your mobile device with a USB cable (not supplied).
6 Product information General information AC Power (Power Adapter) Note •• Product information is subject to change without prior notice. Operation Power Consumption Dimensions Main Unit (W x H x D) Specifications Amplifier Rated Output Power Frequency Response Signal to Noise Ratio Audio-in Input 2 X 10 W RMS 80 -16000 Hz, ±3 dB >67 dBA 600 mV RMS 20 kohm Weight Main Unit Brand name: PHILIPS; Model: AS360-120-AE250; Input: 100-240 V~, 50/60 Hz, 1.2 A Output: 12 V 2.5 A; 12.
7 Troubleshooting Warning •• Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www. philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available.
8 Notice disposal of your old product helps prevent potentially negative consequences on the environment and human health. Any changes or modifications made to this device that are not expressly approved by Gibson Innovations may void the user’s authority to operate the equipment. Environmental information All unnecessary packaging has been omitted.
Specifications are subject to change without notice. 2015 © Gibson Innovations Limited. All rights reserved. This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. BT4000_12_UM_V3.