User manual Register your product and get support at www.philips.
Contents 1 Important Safety Notice 2 Your Bluetooth speaker Introduction What's in the box Overview of the speaker 3 Get started Turn on/off Check the battery level Charge the built-in battery 4 Play from Bluetooth devices Connect a Bluetooth device Play from a connected Bluetooth device Disconnect a device Reconnect a device Clear pairing information Control your phone call 5 Other features Listen to an external device Adjust volume Attach the lanyard cable 6 Specifications 7 Troubleshooting Genera
1 Important Safety Warning •• Never remove the casing of this speaker. •• Never place this speaker on other electrical equipment. •• Keep this speaker away from direct sunlight, naked flames or heat. • Only use attachments or accessories specified by the manufacturer. The battery shall not be exposed to excessive heat such as sunshine, fire or the like. Do not place any sources of danger on the speaker (e.g. lighted candles).
• • • Increase the separation between equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
regarding the disposal of packaging materials, exhausted batteries and old equipment. Trademark notice The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Gibson Innovations Limited is under license. Other trademarks and trade names are those of their respective owners. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. Quick Charge is a trademark of Qualcomm Incorporated.
Overview of the speaker 3 Get started Always follow the instructions in this chapter in sequence. Turn on/off a -/+ • Adjust volume. • b Battery level indicators • Show the charging progress. • Show the battery level. c d e • • Enter Bluetooth pairing mode. Clear Bluetooth pairing information. • • • Turn the speaker on or off. Check the battery level. Show the Bluetooth status. • In Bluetooth mode, press to pause or resume play. In Bluetooth mode, press twice to play the next track.
• To manually check the battery level, briefly press in either power-on or power-off mode. »» The different behavior of the four LEDs indicates different battery levels. When the battery level is low, LED 1 flashes red as illustrated. LED indication: LED 4 LED 3 To charge the built-in battery: • Pull out the USB cable from the USB lanyard cable as illustrated.
System Battery status status System behavior Off During charging Shows the charging indication Off Fully charged All LEDs are on, then turn off after three minutes. 4 Play from Bluetooth devices With this speaker, you can listen to audio from Bluetooth-enabled devices and control the incoming call through Bluetooth. Check the charging progress During charging, you can press check the charging progress.
2 3 On your Bluetooth device, enable Bluetooth and search for Bluetooth devices that can be paired (see the user manual of the device). After successful Bluetooth connection, play audio on the connected device. »» Audio streams from your Bluetooth device to the speaker. • Select [Philips BT6900] displayed on your device for pairing. If necessary, input “0000” as the pairing password. »» After successful connection, the speaker beeps twice, and the LED turns solid blue.
Control your phone call After Bluetooth connection, you can control an incoming call with this speaker. Button Function Press to answer an incoming call. Press and hold for two seconds to reject an incoming call. During a call, press to end the current call. 5 Other features Listen to an external device With this speaker, you can also listen to an external audio device such as an MP3 player. Note •• Make sure that music playback through Bluetooth is stopped.
Adjust volume During music playback, press -/+ to increase or decrease volume. Tip 6 Specifications Note •• Product information is subject to change without prior notice. •• You can press and hold -/+ to increase or decrease volume continuously. •• When the volume reaches the maximum, the speaker beeps twice. Attach the lanyard cable For easy carrying, attach the supplied USB lanyard cable to this speaker as illustrated.
7 Trouble shooting •• If the issue remains, when the speaker is switched on, hold both the + and keys at the same time for 7 seconds until the speaker is off. Then wait for the speaker to reset and switch on again automatically. Warning •• Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service.
2017 © Gibson Innovations Limited. All rights reserved. This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. BT6900_37_UM_V1.
