User manual

6 EN
4 Get started
Always follow the instructions in this chapter in
sequence.
Connect power
Caution
•
Risk of product damage! Make sure that the power
voltage corresponds to the voltage printed on the back
or underside of the speaker.
• Risk of electric shock! When you unplug the AC
adapter, always pull the plug from the socket. Never
pull the cord.
Connect the power adaptor to:
• the DC IN socket on the speaker.
• the wall outlet.
Turn on
Press .
» The speaker switches to Bluetooth
mode.
» TheLEDindicatorashesblue.
Switch to standby mode
The speaker switches to standby mode in the
following situations:
• In power on mode, press
.
• No audio is played or no key is pressed for
15 minutes.
Wake up from standby mode
• In standby mode, press
or PAIRING.
• Tap the NFC tag with your mobile phone.
LED indicator status
Mode LED status
Standby
mode
Solid red.
Bluetooth
mode
Flashing blue while connecting, or
waiting for pairing; Solid blue after
connected.
Flash blue shortly when the
volume reaches the maximum/
minimum.
Audio-in
mode
Solid green.
Flashing green shortly when the
volume reaches the maximum/
minimum.